[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@hzhy-IdeaCentre-GeekPro-14IOB) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #4 SMP PREEMPT Sat Sep 18 15:17:44 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2033152 [ 0.000000] DMA zone: 7192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 460288 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2001384 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30188(92%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7187352K/8132608K available (17022K kernel code, 3184K rwdata, 7808K rodata, 8832K init, 641K bss, 191592K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8009120000 ( 17024 KB) [ 0.000000] .rodata : 0xffffff8009120000 - 0xffffff80098d0000 ( 7872 KB) [ 0.000000] .init : 0xffffff80098d0000 - 0xffffff800a170000 ( 8832 KB) [ 0.000000] .data : 0xffffff800a170000 - 0xffffff800a48c008 ( 3185 KB) [ 0.000000] .bss : 0xffffff800a48c008 - 0xffffff800a52c5f4 ( 642 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000776] Console: colour dummy device 80x25 [ 0.000787] console [tty0] enabled [ 0.000794] bootconsole [tegra_comb_uart0] disabled [ 0.000809] kmemleak: Kernel memory leak detector disabled [ 0.000827] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000842] pid_max: default: 32768 minimum: 301 [ 0.001941] Security Framework initialized [ 0.002522] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002532] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004195] ftrace: allocating 52116 entries in 204 pages [ 0.440117] sched-energy: Sched-energy-costs installed from DT [ 0.440137] ASID allocator initialised with 65536 entries [ 0.475243] tegra-id: chipid=21917. [ 0.475255] tegra-id: opt_subrevision=1. [ 0.475283] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.475321] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.475332] DTB Build time: Sep 18 2021 15:16:10 [ 0.523372] CPU1: Booted secondary processor [4e0f0040] [ 0.555437] CPU2: Booted secondary processor [4e0f0040] [ 0.587545] CPU3: Booted secondary processor [4e0f0040] [ 0.619848] CPU4: Booted secondary processor [4e0f0040] [ 0.651843] CPU5: Booted secondary processor [4e0f0040] [ 0.652033] Brought up 6 CPUs [ 0.652050] SMP: Total of 6 processors activated. [ 0.652059] CPU features: detected feature: Privileged Access Never [ 0.652068] CPU features: detected feature: LSE atomic instructions [ 0.652077] CPU features: detected feature: User Access Override [ 0.652083] CPU features: detected feature: 32-bit EL0 Support [ 0.653576] CPU: All CPU(s) started at EL2 [ 0.653640] alternatives: patching kernel code [ 0.660133] devtmpfs: initialized [ 0.701309] Initilizing CustomIPI irq domain [ 0.701485] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.701499] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.711404] pinctrl core: initialized pinctrl subsystem [ 0.711624] OS set in device tree is not L4T. [ 0.711888] regulator-dummy: no parameters [ 0.712143] Initializing plugin-manager [ 0.712202] Plugin module not found [ 0.712238] Plugin-manager status disabled [ 0.713471] NET: Registered protocol family 16 [ 0.715005] pstore: using zlib compression [ 0.715024] console [pstore-1] enabled [ 0.715029] pstore: Registered ramoops as persistent store backend [ 0.715036] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.742565] cpuidle: using governor menu [ 0.743648] bpmp: waiting for handshake [ 0.743655] bpmp: handshake completed [ 0.743670] bpmp: synchronizing channels [ 0.743679] bpmp: channels synchronized [ 0.743685] bpmp: mail init ok [ 0.746147] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.746312] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.746320] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.746326] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.746335] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.746367] t19x-arm-smmu 12000000.iommu: nested translation [ 0.746376] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.746383] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.746390] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.746398] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.746424] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.750424] vdso: 2 pages (1 code @ ffffff8009127000, 1 data @ ffffff800a174000) [ 0.750451] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.752911] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.753977] tegra_aon_clk_init: ok [ 0.753985] Registering BPMP clocks... [ 0.754091] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.754719] Serial: AMBA PL011 UART driver [ 0.754827] tegra_powergate_init: DONE [ 0.754901] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.754937] DTB Build time: Sep 18 2021 15:16:10 [ 0.757590] Tegra reboot handler registered. [ 0.765206] iommu: Adding device 14160000.pcie to group 0 [ 0.765814] iommu: Adding device 141a0000.pcie to group 1 [ 0.767120] iommu: Adding device 2490000.ether_qos to group 2 [ 0.767574] iommu: Adding device 3100000.serial to group 3 [ 0.768044] iommu: Adding device 3110000.serial to group 4 [ 0.768399] iommu: Adding device 3140000.serial to group 5 [ 0.768942] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.769151] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.769169] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.769174] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.769180] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.769224] tegra-pmc: PMC Prod config success [ 0.769401] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.769414] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.769698] iommu: Adding device 3460000.sdhci to group 6 [ 0.770204] iommu: Adding device 3440000.sdhci to group 7 [ 0.770687] iommu: Adding device 3210000.spi to group 8 [ 0.771095] iommu: Adding device 3230000.spi to group 9 [ 0.771445] iommu: Adding device 3270000.spi to group 10 [ 0.772470] iommu: Adding device 3160000.i2c to group 11 [ 0.772834] iommu: Adding device c240000.i2c to group 12 [ 0.773227] iommu: Adding device 3180000.i2c to group 13 [ 0.773579] iommu: Adding device 3190000.i2c to group 14 [ 0.774083] iommu: Adding device 31b0000.i2c to group 15 [ 0.774445] iommu: Adding device 31c0000.i2c to group 16 [ 0.774849] iommu: Adding device c250000.i2c to group 17 [ 0.775212] iommu: Adding device 31e0000.i2c to group 18 [ 0.775850] iommu: Adding device sound to group 19 [ 0.776440] iommu: Adding device 3510000.hda to group 20 [ 0.776996] iommu: Adding device bc00000.rtcpu to group 21 [ 0.778800] iommu: Adding device 13e10000.host1x to group 22 [ 0.779174] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.779538] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.779912] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.780276] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.780622] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.781036] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.781450] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.781804] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.782411] iommu: Adding device 15340000.vic to group 31 [ 0.782858] iommu: Adding device 15380000.nvjpg to group 32 [ 0.783144] iommu: Adding device 15500000.tsec to group 33 [ 0.783438] iommu: Adding device 15100000.tsecb to group 34 [ 0.783720] iommu: Adding device 15480000.nvdec to group 35 [ 0.783998] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.784324] iommu: Adding device 154c0000.nvenc to group 37 [ 0.784668] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.785109] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.785505] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.786083] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.790054] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.790124] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.791964] iommu: Adding device 15c10000.vi to group 42 [ 0.792141] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.792584] iommu: Adding device 14800000.isp to group 43 [ 0.793720] iommu: Adding device 16000000.pva0 to group 44 [ 0.794242] iommu: Adding device 16800000.pva1 to group 45 [ 0.794743] iommu: Adding device 15810000.se to group 46 [ 0.795132] iommu: Adding device 15820000.se to group 47 [ 0.795449] iommu: Adding device 15830000.se to group 48 [ 0.795752] iommu: Adding device 15840000.se to group 49 [ 0.796038] iommu: Adding device c1a0000.aon to group 50 [ 0.797860] iommu: Adding device d000000.bpmp to group 51 [ 0.798154] bpmp: ping status is 0 [ 0.798277] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.801530] bpmp d000000.bpmp: probe ok [ 0.803458] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.804041] iommu: Adding device smmu_test to group 52 [ 0.805224] mc: mapped MMIO address: 0xffffff800aab0000 -> 0x2c10000 [ 0.805249] mc: mapped MMIO address: 0xffffff800aad0000 -> 0x2c20000 [ 0.805271] mc: mapped MMIO address: 0xffffff800aaf0000 -> 0x2c30000 [ 0.805293] mc: mapped MMIO address: 0xffffff800ab10000 -> 0x2c40000 [ 0.805312] mc: mapped MMIO address: 0xffffff800ab30000 -> 0x2c50000 [ 0.805334] mc: mapped MMIO address: 0xffffff800ab50000 -> 0x2b80000 [ 0.805354] mc: mapped MMIO address: 0xffffff800ab70000 -> 0x2b90000 [ 0.805373] mc: mapped MMIO address: 0xffffff800ab90000 -> 0x2ba0000 [ 0.805408] mc: mapped MMIO address: 0xffffff800abb0000 -> 0x2bb0000 [ 0.805428] mc: mapped MMIO address: 0xffffff800abd0000 -> 0x1700000 [ 0.805446] mc: mapped MMIO address: 0xffffff800abf0000 -> 0x1710000 [ 0.805471] mc: mapped MMIO address: 0xffffff800ac10000 -> 0x1720000 [ 0.805487] mc: mapped MMIO address: 0xffffff800ac30000 -> 0x1730000 [ 0.805504] mc: mapped MMIO address: 0xffffff800ac50000 -> 0x1740000 [ 0.805520] mc: mapped MMIO address: 0xffffff800ac70000 -> 0x1750000 [ 0.805536] mc: mapped MMIO address: 0xffffff800ac90000 -> 0x1760000 [ 0.805552] mc: mapped MMIO address: 0xffffff800acb0000 -> 0x1770000 [ 0.805626] mc-err: mcerr ops are set to t19x [ 0.812019] iommu: Adding device 2600000.dma to group 53 [ 0.817789] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.819016] GPIO line 339 (wifi-enable) hogged as output/high [ 0.819062] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.819103] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.819388] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.827541] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.827613] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.827654] GPIO line 266 (w-disable1) hogged as output/high [ 0.827692] GPIO line 264 (w-disable2) hogged as output/high [ 0.827728] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.828001] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.830375] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.830385] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.830394] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.831275] iommu: Adding device 3550000.xudc to group 54 [ 0.831974] iommu: Adding device 3610000.xhci to group 55 [ 0.834356] arm64_ras arm64_ras: probed [ 0.834748] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.834788] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.834863] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.834943] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.835021] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.835093] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.835286] carmel_ras_enable: RAS enabled on cpu0 [ 0.835455] carmel_ras_enable: RAS enabled on cpu1 [ 0.835640] carmel_ras_enable: RAS enabled on cpu2 [ 0.835839] carmel_ras_enable: RAS enabled on cpu3 [ 0.836026] carmel_ras_enable: RAS enabled on cpu4 [ 0.836210] carmel_ras_enable: RAS enabled on cpu5 [ 0.836275] carmel_ras carmel_ras: probed [ 0.837643] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.838479] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.839441] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.840381] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.841301] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.841711] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.843038] vdd-ac-bat: 5000 mV [ 0.843463] vdd-sdmmc1-sw: 3300 mV [ 0.843795] vdd-1v8-sd: 1800 mV [ 0.844127] vdd-3v3-cvb: 3300 mV [ 0.844469] vdd-1v8-cvb: 1800 mV [ 0.844784] vdd-epb-1v0: 1000 mV [ 0.844965] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.845247] avdd-cam-2v8: 2800 mV [ 0.845611] vdd-fan: 5000 mV [ 0.845946] vdd-hdmi-5v0: 5000 mV [ 0.846246] vdd_sys_en: 1200 mV [ 0.918874] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.924514] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.924829] SCSI subsystem initialized [ 0.925108] libata version 3.00 loaded. [ 0.925314] usbcore: registered new interface driver usbfs [ 0.925366] usbcore: registered new interface driver hub [ 0.925407] usbcore: registered new device driver usb [ 0.937593] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.940622] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.947821] vdd-1v0: at 1000 mV [ 0.951798] vdd-1v8-hs: at 1800 mV [ 0.955837] vdd-1v8-ls: at 1800 mV [ 0.959839] vdd-1v8-ao: at 1800 mV [ 0.963888] vddio-ddr-1v1: at 1100 mV [ 0.967659] vdd-rtc: at 800 mV [ 0.968737] spmic-ldo1: at 2375 mV [ 0.975673] vdd-ao-3v3: at 3300 mV [ 0.983693] vddio-emmc-3v3: at 3300 mV [ 0.984774] spmic-ldo4: at 1587 mV [ 0.991735] vdd-usb-3v3: at 3300 mV [ 0.999772] vddio-sdmmc1-3v3: at 3300 mV [ 1.003794] vdd-csi-1v2: at 1200 mV [ 1.004898] spmic-ldo8: at 1800 mV [ 1.009215] GPIO line 246 (gpio_default) hogged as output/high [ 1.010183] GPIO line 247 (gpio_default) hogged as output/high [ 1.010541] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 1.010884] max77620 4-003c: max77620 probe successful [ 1.011507] media: Linux media interface: v0.10 [ 1.011547] Linux video capture interface: v2.00 [ 1.013275] pps_core: LinuxPPS API ver. 1 registered [ 1.013282] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.013303] PTP clock support registered [ 1.013646] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.013898] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.013931] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.016888] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 1.016949] trusty trusty: selected api version: 3 (requested 3) [ 1.018593] Advanced Linux Sound Architecture Driver Initialized. [ 1.019329] Bluetooth: Core ver 2.22 [ 1.019408] NET: Registered protocol family 31 [ 1.019414] Bluetooth: HCI device and connection manager initialized [ 1.019424] Bluetooth: HCI socket layer initialized [ 1.019433] Bluetooth: L2CAP socket layer initialized [ 1.019471] Bluetooth: SCO socket layer initialized [ 1.022552] camchar: rtcpu character device driver loaded [ 1.023286] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 1.023381] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 1.025314] clocksource: Switched to clocksource arch_sys_counter [ 1.075439] VFS: Disk quotas dquot_6.6.0 [ 1.075568] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.075913] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.077127] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.077176] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.077605] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.077612] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.077626] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.077633] nvmap_page_pool_init: Total RAM pages: 1985254 [ 1.077639] nvmap_page_pool_init: nvmap page pool size: 248156 pages (969 MB) [ 1.077902] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.078246] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.079925] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.092502] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.092720] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.092933] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.093105] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.093344] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.094534] la/ptsa driver initialized. [ 1.094879] NET: Registered protocol family 2 [ 1.095656] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.096005] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.096629] TCP: Hash tables configured (established 65536 bind 65536) [ 1.096677] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.096794] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.097160] NET: Registered protocol family 1 [ 1.097767] RPC: Registered named UNIX socket transport module. [ 1.097773] RPC: Registered udp transport module. [ 1.097778] RPC: Registered tcp transport module. [ 1.097783] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.097793] PCI: CLS 0 bytes, default 64 [ 1.098009] Trying to unpack rootfs image as initramfs... [ 1.326747] Freeing initrd memory: 7068K [ 1.346894] host1x 13e10000.host1x: initialized [ 1.349456] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.354208] audit: initializing netlink subsys (disabled) [ 1.354248] audit: type=2000 audit(0.932:1): initialized [ 1.354874] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.363668] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.364822] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.365441] 9p: Installing v9fs 9p2000 file system support [ 1.370627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.370765] io scheduler noop registered [ 1.370981] io scheduler cfq registered (default) [ 1.374725] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.375825] random: fast init done [ 1.408603] iommu: Adding device 2993000.adsp to group 56 [ 1.517443] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.518459] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.532079] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.532619] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.533207] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.533609] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.533971] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.537216] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.537524] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.540564] tsec 15500000.tsec: initialized [ 1.542353] tsec 15100000.tsecb: initialized [ 1.546270] nvdec 15480000.nvdec: initialized [ 1.548803] nvdec 15140000.nvdec1: initialized [ 1.554261] falcon 15340000.vic: initialized [ 1.556133] falcon 15380000.nvjpg: initialized [ 1.558198] falcon 154c0000.nvenc: initialized [ 1.560232] falcon 15a80000.nvenc1: initialized [ 1.563254] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.565334] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.567062] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.568574] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.570365] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.572133] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.573731] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.575348] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.579054] t194-nvcsi 15a00000.nvcsi: initialized [ 1.584671] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.585130] scare-pigeon 14b00000.isp-thi: initialized [ 1.590884] pva 16000000.pva0: initialized [ 1.596652] pva 16800000.pva1: initialized [ 1.601701] nvdla 15880000.nvdla0: initialized [ 1.606474] nvdla 158c0000.nvdla1: initialized [ 1.608072] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.608088] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.608162] tegradccommon 15200000.dc_common: dma mapping done [ 1.608315] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.608326] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.608690] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.608715] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.608995] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.609005] tegra_cec 3960000.tegra_cec: probed [ 1.609741] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.609780] generic_infoframe_type: 0x87 [ 1.609867] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.609917] tegradc 15200000.nvdisplay: Display dc.ffffff800d090000 registered with id=0 [ 1.614567] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.614576] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.614581] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.614851] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.614869] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.617969] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.617980] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.619926] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.620583] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.620593] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.620904] kfuse 3830000.kfuse: initialized [ 1.621350] tegradc 15200000.nvdisplay: probed [ 1.621956] Console: switching to colour frame buffer device 80x30 [ 1.621986] tegradc 15200000.nvdisplay: fb registered [ 1.622291] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.626028] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.628422] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.629458] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.630233] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.631356] console [ttyTCU0] enabled [ 1.631953] kkkkkkkkkkkkkkkk [ 1.958556] [drm] Initialized [ 1.969810] brd: module loaded [ 1.974823] loop: module loaded [ 1.974886] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.974982] tegra_profiler: auth: init [ 1.975564] THERMAL EST: found 3 subdevs [ 1.975571] THERMAL EST num_resources: 0 [ 1.975578] [THERMAL EST subdev 0] [ 1.975584] [THERMAL EST subdev 1] [ 1.975590] [THERMAL EST subdev 2] [ 1.975600] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.975864] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.975869] THERMAL EST: thz register success. [ 1.976043] THERMAL EST: end of probe, return err: 0 [ 1.976739] sd: No Scsi addr parsed to reserve index [ 1.976780] hisi_sas: driver version v1.6 [ 1.986708] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.986718] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.986728] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.986976] 1 ofpart partitions found on MTD device spi6.0 [ 1.986983] Creating 1 MTD partitions on "spi6.0": [ 1.987001] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.989233] libphy: Fixed MDIO Bus: probed [ 1.990924] tun: Universal TUN/TAP device driver, 1.6 [ 1.990930] tun: (C) 1999-2004 Max Krasnyansky [ 1.991734] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.991739] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.991771] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.991776] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.991805] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.991810] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.991841] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.991845] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.236609] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 2.237198] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 50 cc af [ 2.237214] Using phyrst_lpmode = 1 from DT [ 2.237335] libphy: dwc_phy: probed [ 2.239727] PPP generic driver version 2.4.2 [ 2.240165] PPP BSD Compression module registered [ 2.240173] PPP Deflate Compression module registered [ 2.240193] PPP MPPE Compression module registered [ 2.240202] NET: Registered protocol family 24 [ 2.240234] RTW: module init start [ 2.240239] RTW: rtl88x2cu v5.12.1-12-g21bffd1.20201116_beta [ 2.240244] RTW: build time: Sep 16 2021 18:10:42 [ 2.240249] RTW: rtl88x2cu BT-Coex version = COEX20200922-1e1e [ 2.240333] RTW: rtw_inetaddr_notifier_register [ 2.240374] usbcore: registered new interface driver rtl88x2cu [ 2.240379] RTW: module init ret=0 [ 2.240407] usbcore: registered new interface driver r8152 [ 2.240460] usbcore: registered new interface driver asix [ 2.240489] usbcore: registered new interface driver ax88179_178a [ 2.240513] usbcore: registered new interface driver cdc_ether [ 2.240536] usbcore: registered new interface driver net1080 [ 2.240566] usbcore: registered new interface driver cdc_subset [ 2.240609] usbcore: registered new interface driver zaurus [ 2.240645] usbcore: registered new interface driver cdc_ncm [ 2.241074] VFIO - User Level meta-driver version: 0.3 [ 2.242323] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.242344] ehci-pci: EHCI PCI platform driver [ 2.242375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.242386] ohci-pci: OHCI PCI platform driver [ 2.242412] ohci-platform: OHCI generic platform driver [ 2.247418] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 2.249391] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4df6800 id [ 2.250150] usbcore: registered new interface driver uas [ 2.250197] usbcore: registered new interface driver usb-storage [ 2.250362] usbcore: registered new interface driver usbserial [ 2.251762] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 2.251797] tegra-xusb 3610000.xhci: xHCI Host Controller [ 2.251816] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 2.252571] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 2.252650] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 2.252898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.252929] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.252936] usb usb1: Product: xHCI Host Controller [ 2.252943] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 2.252949] usb usb1: SerialNumber: 3610000.xhci [ 2.253504] hub 1-0:1.0: USB hub found [ 2.253556] hub 1-0:1.0: 4 ports detected [ 2.253938] tegra-xusb 3610000.xhci: xHCI Host Controller [ 2.253951] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 2.253961] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 2.254182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.254189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.254195] usb usb2: Product: xHCI Host Controller [ 2.254201] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 2.254206] usb usb2: SerialNumber: 3610000.xhci [ 2.254695] hub 2-0:1.0: USB hub found [ 2.254739] hub 2-0:1.0: 4 ports detected [ 2.255569] Wake76 for irq=199 [ 2.255575] Wake77 for irq=199 [ 2.255579] Wake78 for irq=199 [ 2.255583] Wake79 for irq=199 [ 2.255587] Wake80 for irq=199 [ 2.255591] Wake81 for irq=199 [ 2.255595] Wake82 for irq=199 [ 2.255650] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 2.255657] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 2.257750] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 2.257839] tegra-xudc-new 3550000.xudc: device count: 1 [ 2.258642] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 2.258653] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 2.258679] tegra-xudc-new 3550000.xudc: entering ELPG [ 2.258880] tegra-xudc-new 3550000.xudc: entering ELPG done [ 2.259550] mousedev: PS/2 mouse device common for all mice [ 2.259696] usbcore: registered new interface driver xpad [ 2.357929] usb usb2: usb_suspend_both: status 0 [ 2.391568] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.393245] Wake73 for irq=42 [ 2.394504] rtc rtc1: alarm rtc device [ 2.394518] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.394564] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.394734] i2c /dev entries driver [ 2.396929] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.397469] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.397477] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.398017] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.421497] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.421579] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.421880] imx219 9-0010: board setup failed [ 2.422073] imx219: probe of 9-0010 failed with error -121 [ 2.422556] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.445863] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.445933] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.446223] imx219 10-0010: board setup failed [ 2.446428] imx219: probe of 10-0010 failed with error -121 [ 2.447910] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.448776] tegra-i2c c240000.i2c: no acknowledge from address 0x48 [ 2.449011] tegra-i2c c240000.i2c: no acknowledge from address 0x48 [ 2.456175] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.456597] FAN dev name: pwm-fan [ 2.456643] FAN:gpio request success. [ 2.456652] FAN: can't find tach_gpio [ 2.456664] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.456695] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.456902] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.456909] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.457500] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.457509] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.457516] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.457523] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.457529] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.457535] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.457542] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.457548] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.457555] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.457562] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.458305] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.459603] device-mapper: uevent: version 1.0.3 [ 2.460015] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.464288] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.465592] cpuidle: Initializing cpuidle driver [ 2.466573] sdhci: Secure Digital Host Controller Interface driver [ 2.466577] sdhci: Copyright(c) Pierre Ossman [ 2.466581] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.467551] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.469768] CMDQ: cmdq_platfm_init successful [ 2.470242] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 2.472267] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 2.474362] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 321 [ 2.479006] tegra-se-nvhost 15810000.se: initialized [ 2.483449] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.484476] tegra-se-nvhost 15820000.se: initialized [ 2.485681] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.486832] tegra-se-nvhost 15830000.se: initialized [ 2.487463] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.488525] tegra-se-nvhost 15840000.se: initialized [ 2.489620] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.490928] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.491084] hidraw: raw HID events driver (C) Jiri Kosina [ 2.492119] usbcore: registered new interface driver usbhid [ 2.492123] usbhid: USB HID core driver [ 2.495964] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.497147] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.497659] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.498469] denver_knobs_init:MTS_VERSION:53250041 [ 2.498828] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.499607] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.500027] t19x_cache tegra-cache: probed [ 2.502331] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.502339] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.502947] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.503381] PLL_AON clock registered [ 2.505169] Clocks initialized successfully [ 2.506996] nvpmodel: initialized successfully [ 2.508203] trusty-virtio trusty:virtio: initializing [ 2.508400] trusty_ipc virtio0: vring0: va(pa) ffffffc1f2772000(0) qsz 32 notifyid 1 [ 2.508414] trusty_ipc virtio0: vring1: va(pa) ffffffc1f277c000(0) qsz 32 notifyid 2 [ 2.508539] trusty-virtio trusty:virtio: initializing done [ 2.508751] trusty_ipc virtio0: is online [ 2.509343] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.509412] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.509782] usbcore: registered new interface driver snd-usb-audio [ 2.524126] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.524356] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.524538] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.524678] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.525452] gpio tegra-gpio wake51 for gpio=130(Q:2) [ 2.525510] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.555276] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.569527] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.569734] mmc0: periodic cache flush enabled [ 2.569751] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.570176] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.574827] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.575071] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.575293] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.579159] OPE platform probe [ 2.579287] OPE platform probe successful [ 2.589323] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.590004] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.613859] usb 1-2: New USB device found, idVendor=0451, idProduct=8242 [ 2.613867] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.613871] usb 1-2: SerialNumber: 9100084965C3 [ 2.614601] hub 1-2:1.0: USB hub found [ 2.614666] hub 1-2:1.0: 4 ports detected [ 2.629369] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.629376] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.647612] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.647723] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.647823] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.647936] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.648018] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.648094] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.648191] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.648268] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.648341] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.648438] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.648533] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.648627] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.648702] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.648779] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.648851] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.648932] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.649006] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.649085] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.649184] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.649301] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.676213] u32 classifier [ 2.676218] Actions configured [ 2.676289] Initializing XFRM netlink socket [ 2.676852] NET: Registered protocol family 10 [ 2.677629] NET: Registered protocol family 17 [ 2.677643] NET: Registered protocol family 15 [ 2.677702] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.677814] Bluetooth: RFCOMM socket layer initialized [ 2.677839] Bluetooth: RFCOMM ver 1.11 [ 2.677846] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.677853] Bluetooth: HIDP socket layer initialized [ 2.677871] 9pnet: Installing 9P2000 support [ 2.677907] Key type dns_resolver registered [ 2.679491] Registered cp15_barrier emulation handler [ 2.679507] Registered setend emulation handler [ 2.681012] registered taskstats version 1 [ 2.681321] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.682443] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.682462] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.682470] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.682476] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.718565] mmc1: hw tuning done ... [ 2.718608] mmc1: new ultra high speed SDR104 SDXC card at address aaaa [ 2.719016] mmcblk1: mmc1:aaaa SD256 238 GiB [ 2.720651] mmcblk1: p1 [ 2.733582] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.753702] usb 2-3: New USB device found, idVendor=0451, idProduct=8240 [ 2.753709] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.755234] hub 2-3:1.0: USB hub found [ 2.755588] hub 2-3:1.0: 4 ports detected [ 2.901310] usb 1-2.1: new low-speed USB device number 3 using tegra-xusb [ 2.913321] usb 2-3: usb_suspend_both: status 0 [ 2.913508] usb usb2: usb_suspend_both: status 0 [ 2.924659] usb 1-2.1: New USB device found, idVendor=093a, idProduct=2521 [ 2.924665] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.924670] usb 1-2.1: Product: USB OPTICAL MOUSE [ 2.928862] input: USB OPTICAL MOUSE as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/0003:093A:2521.0001/input/input4 [ 2.929113] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-3610000.xhci-2.1/input0 [ 3.197915] tegra-pcie-dw 14160000.pcie: link is down [ 3.198043] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.198051] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.198059] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.198065] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.198069] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.198117] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.198288] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.198508] iommu: Adding device 0004:00:00.0 to group 58 [ 3.198723] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.198766] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.198952] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 3.198960] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 3.199028] aer 0004:00:00.0:pcie002: service driver aer loaded [ 3.199208] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 3.199285] aer 0004:00:00.0:pcie002: unloading service driver aer [ 3.199389] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 3.199490] iommu: Removing device 0004:00:00.0 from group 58 [ 3.199523] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 3.201531] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 3.202164] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 3.202366] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 3.202377] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 3.309659] OF: PCI: host bridge /pcie@141a0000 ranges: [ 3.309679] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 3.309688] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 3.309711] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.822738] tegra-pcie-dw 141a0000.pcie: link is down [ 3.822923] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.822931] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.822939] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.822954] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.822959] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.823003] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.823152] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.823341] iommu: Adding device 0005:00:00.0 to group 58 [ 3.823684] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.823707] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.823930] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.823938] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.824014] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.824177] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.824289] aer 0005:00:00.0:pcie002: unloading service driver aer [ 3.824362] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.824494] iommu: Removing device 0005:00:00.0 from group 58 [ 3.824572] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.826364] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.837224] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 3.928941] tegra-i2c 31e0000.i2c: no acknowledge from address 0x39 [ 3.928976] pca953x 8-0039: failed reading register [ 3.929152] pca953x: probe of 8-0039 failed with error -121 [ 3.931045] tegra194-isp5 14800000.isp: initialized [ 3.937268] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.939796] tegra194-vi5 15c10000.vi: initialized [ 3.944035] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.944134] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.944358] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.948526] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.948542] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.948547] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.948609] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.948648] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.948653] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.952688] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.952729] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.952734] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.953090] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.953141] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.953148] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.953568] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.953608] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.953612] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.953817] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.954576] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.031075] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 4.031443] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.031673] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 4.031894] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 4.032386] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 4.032513] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 4.032777] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 4.032781] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.033699] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 4.034144] Wake83 for irq=211 [ 4.034206] gpio tegra-gpio wake67 for gpio=48(G:0) [ 4.034275] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 4.034423] input: gpio-keys as /devices/gpio-keys/input/input5 [ 4.066395] tegra_rtc c2a0000.rtc: setting system clock to 2021-11-23 02:53:52 UTC (1637636032) [ 4.066948] mmcblk mmc0:0001: Card claimed for testing. [ 4.066959] mmcblk mmc1:aaaa: Card claimed for testing. [ 4.106105] bpmp: mounted debugfs mirror [ 4.112428] ALSA device list: [ 4.112434] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 4.112438] #1: jetson-xaviernx-ape [ 4.114774] Freeing unused kernel memory: 8832K [ 4.153140] Root device found: mmcblk0p1 [ 4.154930] Found dev node: /dev/mmcblk0p1 [ 4.176990] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.179724] Rootfs mounted over mmcblk0p1 [ 4.198683] Switching from initrd to actual rootfs [ 4.316466] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.320249] cgroup: cgroup2: unknown option "nsdelegate" [ 4.332127] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.332791] systemd[1]: Detected architecture arm64. [ 4.340421] systemd[1]: Set hostname to . [ 4.421597] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.421610] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.566986] systemd[1]: Configuration file /etc/systemd/system/setssdroot.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 4.571368] random: systemd: uninitialized urandom read (16 bytes read) [ 4.571406] systemd[1]: Reached target User and Group Name Lookups. [ 4.571687] random: systemd: uninitialized urandom read (16 bytes read) [ 4.574761] systemd[1]: Created slice System Slice. [ 4.574888] random: systemd: uninitialized urandom read (16 bytes read) [ 4.575279] systemd[1]: Listening on Syslog Socket. [ 4.575476] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.620685] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.689673] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.698301] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard [ 4.813992] systemd-journald[2436]: Failed to generate stream ID: Function not implemented [ 4.814707] systemd-journald[2436]: Received SIGTERM from PID 1 (n/a). [ 4.864639] systemd: 37 output lines suppressed due to ratelimiting [ 5.055330] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.055910] systemd[1]: Detected architecture arm64. [ 5.058086] systemd[1]: Set hostname to . [ 5.155738] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.156101] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.338438] systemd[1]: Configuration file /etc/systemd/system/setssdroot.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 5.360676] systemd[1]: Started Journal Service. [ 5.364789] systemd[1]: Started Set the console keyboard layout. [ 5.370330] systemd[1]: Started Create Static Device Nodes in /dev. [ 5.372340] systemd[1]: Started Apply Kernel Variables. [ 5.602976] systemd-journald[3282]: Received request to flush runtime journal from PID 1 [ 6.730023] random: crng init done [ 6.730163] random: 7 urandom warning(s) missed due to ratelimiting [ 6.831353] cpu-throttle-alert cooling device registered. [ 6.831784] gpu-throttle-alert cooling device registered. [ 6.833829] aux-throttle-alert cooling device registered. [ 6.837628] using random self ethernet address [ 6.837767] using random host ethernet address [ 7.774504] Mass Storage Function, version: 2009/09/11 [ 7.774514] LUN: removable file: (no medium) [ 7.781070] using random self ethernet address [ 7.781207] using random host ethernet address [ 7.806399] rndis0: HOST MAC c6:c9:04:24:48:04 [ 7.806513] rndis0: MAC c6:c9:04:24:48:05 [ 7.815982] usb0: HOST MAC c6:c9:04:24:48:06 [ 7.816160] usb0: MAC c6:c9:04:24:48:07 [ 7.816187] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.817873] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.817903] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.817953] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.818166] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.818181] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.818618] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.818631] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.818818] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.826329] l4tbr0: port 1(rndis0) entered blocking state [ 7.826336] l4tbr0: port 1(rndis0) entered disabled state [ 7.827614] device rndis0 entered promiscuous mode [ 7.839868] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.850589] l4tbr0: port 2(usb0) entered blocking state [ 7.850597] l4tbr0: port 2(usb0) entered disabled state [ 7.850760] device usb0 entered promiscuous mode [ 7.860896] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 8.617914] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 8.868818] zram: Added device: zram0 [ 8.872117] zram: Added device: zram1 [ 8.881791] zram: Added device: zram2 [ 8.882708] zram: Added device: zram3 [ 8.886519] zram: Added device: zram4 [ 8.892550] zram: Added device: zram5 [ 8.914274] zram0: detected capacity change from 0 to 678989824 [ 8.958729] Adding 663072k swap on /dev/zram0. Priority:5 extents:1 across:663072k SS [ 8.967655] zram1: detected capacity change from 0 to 678989824 [ 8.986002] Adding 663072k swap on /dev/zram1. Priority:5 extents:1 across:663072k SS [ 8.991904] zram2: detected capacity change from 0 to 678989824 [ 9.009013] Adding 663072k swap on /dev/zram2. Priority:5 extents:1 across:663072k SS [ 9.014055] zram3: detected capacity change from 0 to 678989824 [ 9.039900] Adding 663072k swap on /dev/zram3. Priority:5 extents:1 across:663072k SS [ 9.047446] zram4: detected capacity change from 0 to 678989824 [ 9.060676] Adding 663072k swap on /dev/zram4. Priority:5 extents:1 across:663072k SS [ 9.078684] zram5: detected capacity change from 0 to 678989824 [ 9.110793] Adding 663072k swap on /dev/zram5. Priority:5 extents:1 across:663072k SS [ 9.148078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.470252] gpio tegra-gpio wake20 for gpio=52(G:4) [ 9.478980] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.924586] Bridge firewalling registered [ 10.956609] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 11.246627] Netfilter messages via NETLINK v0.30. [ 11.250302] ctnetlink v0.93: registering with nfnetlink. [ 11.421758] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 11.821513] tegradc 15200000.nvdisplay: blank - powerdown [ 12.053801] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.054982] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.095515] fuse init (API version 7.26) [ 16.688740] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.688758] Bluetooth: BNEP socket layer initialized [ 34.181878] vdd-sdmmc1-sw: disabling [ 34.181903] vdd-1v8-sd: disabling [ 34.181913] vdd-1v8-cvb: disabling [ 34.181920] vdd-epb-1v0: disabling [ 34.181926] avdd-cam-2v8: disabling [ 34.181933] vdd-fan: disabling [ 34.181941] vdd_sys_en: disabling [ 4162.026338] edid invalid [ 4162.137355] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.150147] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.155257] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.160664] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.165744] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.170909] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.176113] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.180980] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.186515] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.191970] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 4162.193165] tegradc 15200000.nvdisplay: hdmi: edid read failed [ 4162.193344] tegradc 15200000.nvdisplay: hdmi: using fallback edid [ 4162.193371] tegradc 15200000.nvdisplay: blank - powerdown [ 4162.242690] tegradc 15200000.nvdisplay: unblank [ 4162.243733] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4162.243922] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4162.249665] Parent Clock set for DC plld2 [ 4162.256983] tegradc 15200000.nvdisplay: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_111m [ 4162.258449] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 4162.294081] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4162.294084] Extcon AUX1(HDMI) enable [ 4162.297999] tegradc 15200000.nvdisplay: blank - powerdown [ 4162.309214] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 4162.309218] Extcon HDMI: HPD enabled [ 4162.309256] tegradc 15200000.nvdisplay: hdmi: plugged [ 4162.358674] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4162.358679] Extcon AUX1(HDMI) disable [ 4162.388508] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4162.392176] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4162.443739] tegradc 15200000.nvdisplay: blank - powerdown [ 4162.443784] tegradc 15200000.nvdisplay: unblank [ 4162.449634] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4162.449811] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4162.455718] Parent Clock set for DC plld2 [ 4162.461824] tegradc 15200000.nvdisplay: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_111m [ 4162.463243] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 4162.501809] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4162.501812] Extcon AUX1(HDMI) enable [ 4162.501928] tegradc 15200000.nvdisplay: unblank [ 4165.557240] usb 1-2.2: new high-speed USB device number 4 using tegra-xusb [ 4165.577940] usb 1-2.2: New USB device found, idVendor=0424, idProduct=2514 [ 4165.577963] usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4165.580332] hub 1-2.2:1.0: USB hub found [ 4165.580580] hub 1-2.2:1.0: 4 ports detected [ 4165.630264] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4165.630272] Extcon AUX1(HDMI) disable [ 4165.652877] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4165.653661] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4165.653881] tegradc 15200000.nvdisplay: blank - powerdown [ 4165.653967] extcon-disp-state external-connection:disp-state: cable 51 state 0 [ 4165.653972] Extcon HDMI: HPD disabled [ 4165.653998] tegradc 15200000.nvdisplay: hdmi: unplugged [ 4165.664116] tegradc 15200000.nvdisplay: blank - powerdown [ 4165.664133] tegradc 15200000.nvdisplay: unblank [ 4165.664152] tegradc 15200000.nvdisplay: unblank [ 4165.804543] tegradc 15200000.nvdisplay: blank - powerdown [ 4165.804864] tegradc 15200000.nvdisplay: unblank [ 4165.806247] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4165.806473] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4165.811930] Parent Clock set for DC plld2 [ 4165.818946] tegradc 15200000.nvdisplay: hdmi: tmds rate:138750K prod-setting:prod_c_hdmi_111m_223m [ 4165.820457] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 4165.856662] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4165.856692] Extcon AUX1(HDMI) enable [ 4165.856833] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 4165.856839] Extcon HDMI: HPD enabled [ 4165.856871] tegradc 15200000.nvdisplay: hdmi: plugged [ 4165.865340] tegradc 15200000.nvdisplay: blank - powerdown [ 4165.873201] usb 1-2.2.1: new low-speed USB device number 5 using tegra-xusb [ 4165.901682] usb 1-2.2.1: New USB device found, idVendor=0603, idProduct=0002 [ 4165.901688] usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4165.901692] usb 1-2.2.1: Product: USB Composite Device [ 4165.901696] usb 1-2.2.1: Manufacturer: SIPODEV [ 4165.906752] input: SIPODEV USB Composite Device as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/0003:0603:0002.0002/input/input6 [ 4165.920609] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4165.920644] Extcon AUX1(HDMI) disable [ 4165.942186] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4165.942697] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4165.942905] tegradc 15200000.nvdisplay: unblank [ 4165.947654] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4165.948112] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4165.949932] Parent Clock set for DC plld2 [ 4165.956633] tegradc 15200000.nvdisplay: hdmi: tmds rate:74250K prod-setting:prod_c_hdmi_54m_111m [ 4165.958040] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 4165.970078] hid-generic 0003:0603:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIPODEV USB Composite Device] on usb-3610000.xhci-2.2.1/input0 [ 4165.979629] input: SIPODEV USB Composite Device as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.1/0003:0603:0002.0003/input/input7 [ 4165.993640] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4165.993644] Extcon AUX1(HDMI) enable [ 4165.993709] tegradc 15200000.nvdisplay: unblank [ 4166.038124] hid-generic 0003:0603:0002.0003: input,hidraw2: USB HID v1.10 Mouse [SIPODEV USB Composite Device] on usb-3610000.xhci-2.2.1/input1 [ 4166.117215] usb 1-2.2.2: new full-speed USB device number 6 using tegra-xusb [ 4166.140358] usb 1-2.2.2: New USB device found, idVendor=27c0, idProduct=0819 [ 4166.140371] usb 1-2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4166.140377] usb 1-2.2.2: Product: WingCoolTouch [ 4166.140382] usb 1-2.2.2: Manufacturer: WingCoolTouch [ 4166.140388] usb 1-2.2.2: SerialNumber: 9LQ0172005164 [ 4166.147666] input: WingCoolTouch WingCoolTouch as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.0/0003:27C0:0819.0004/input/input8 [ 4166.148181] hid-multitouch 0003:27C0:0819.0004: input,hidraw3: USB HID v1.10 Device [WingCoolTouch WingCoolTouch] on usb-3610000.xhci-2.2.2/input0 [ 4166.150069] hid-generic 0003:27C0:0819.0005: hidraw4: USB HID v1.10 Device [WingCoolTouch WingCoolTouch] on usb-3610000.xhci-2.2.2/input1 [ 4166.229195] usb 1-2.2.3: new full-speed USB device number 7 using tegra-xusb [ 4166.250390] usb 1-2.2.3: New USB device found, idVendor=1a86, idProduct=7523 [ 4166.250400] usb 1-2.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4166.250406] usb 1-2.2.3: Product: USB Serial [ 4166.364365] usbcore: registered new interface driver ch341 [ 4166.364416] usbserial: USB Serial support registered for ch341-uart [ 4166.364491] ch341 1-2.2.3:1.0: ch341-uart converter detected [ 4166.368619] usb 1-2.2.3: ch341-uart converter now attached to ttyUSB0 [ 4173.126445] tegradc 15200000.nvdisplay: blank - powerdown [ 4173.192098] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4173.192115] Extcon AUX1(HDMI) disable [ 4173.223453] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4173.224554] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4173.432939] tegradc 15200000.nvdisplay: blank - powerdown [ 4173.432956] tegradc 15200000.nvdisplay: unblank [ 4173.439434] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4173.450782] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4173.462442] Parent Clock set for DC plld2 [ 4173.467156] tegradc 15200000.nvdisplay: hdmi: tmds rate:138750K prod-setting:prod_c_hdmi_111m_223m [ 4173.468552] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 4173.506039] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4173.506042] Extcon AUX1(HDMI) enable [ 4173.506124] tegradc 15200000.nvdisplay: unblank [ 4177.645467] tegradc 15200000.nvdisplay: unblank [ 4180.095927] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4333.243021] FAN rising trip_level:1 cur_temp:46000 trip_temps[2]:60000