<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Raspberry Pi App Software]]></title><description><![CDATA[Raspberry Pi App Software]]></description><link>http://forum.veye.cc/category/7</link><generator>RSS for Node</generator><lastBuildDate>Thu, 04 Jun 2026 12:02:56 GMT</lastBuildDate><atom:link href="http://forum.veye.cc/category/7.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 07 Mar 2026 08:22:50 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[IMX462+树莓派zero 2w，无法正常控制曝光参数去拍照]]></title><description><![CDATA[@veye_xumm said in IMX462+树莓派zero 2w，无法正常控制曝光参数去拍照:

@若兮鱼

你使用的是驱动模式，不需要调用camera_i2c_config
核心问题是i2c_write这个可执行文件无法执行。可能是发布的release版本，与你的系统在可执行文件格式方面兼容性不好。你可以进入source目录下，编译一下。然后重新执行。
首先可以通过读取devid来确认你的i2c命令通道，veye_mipi_i2c.sh脚本是否正常了。


你好，谢谢，重新编译source目录里的文件后都正常了。问题已解决。
]]></description><link>http://forum.veye.cc/topic/718/imx462-树莓派zero-2w-无法正常控制曝光参数去拍照</link><guid isPermaLink="true">http://forum.veye.cc/topic/718/imx462-树莓派zero-2w-无法正常控制曝光参数去拍照</guid><dc:creator><![CDATA[若兮鱼]]></dc:creator><pubDate>Sat, 07 Mar 2026 08:22:50 GMT</pubDate></item><item><title><![CDATA[Can&#x27;t get v4l2 to work, rasbperry pi 4b, rpi os x64, 6.12.57-v8+]]></title><description><![CDATA[@veye_xumm it is resolved now, the image is shown. Before with the steps on the forum the .dtbo file was also missing, I copied it from another folder and it didn't work. The right and supported way of installing drivers is very confusing, I tried installing by wiki guide and then compiling locally (github), since it didn't work. Thank you for your patience.
]]></description><link>http://forum.veye.cc/topic/709/can-t-get-v4l2-to-work-rasbperry-pi-4b-rpi-os-x64-6-12-57-v8</link><guid isPermaLink="true">http://forum.veye.cc/topic/709/can-t-get-v4l2-to-work-rasbperry-pi-4b-rpi-os-x64-6-12-57-v8</guid><dc:creator><![CDATA[jambojettt]]></dc:creator><pubDate>Sun, 09 Nov 2025 15:32:11 GMT</pubDate></item><item><title><![CDATA[有一些错误 ，大神们 请指教啊raspi5 +imx78]]></title><description><![CDATA[@nian 不客气
]]></description><link>http://forum.veye.cc/topic/688/有一些错误-大神们-请指教啊raspi5-imx78</link><guid isPermaLink="true">http://forum.veye.cc/topic/688/有一些错误-大神们-请指教啊raspi5-imx78</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Wed, 25 Jun 2025 06:44:05 GMT</pubDate></item><item><title><![CDATA[buildme failed]]></title><description><![CDATA[@veye_xumm Thanks! I'll read and reinstall the SO.
Hopefully, I'll be able to show if the problem is resolved in the next few days.
]]></description><link>http://forum.veye.cc/topic/682/buildme-failed</link><guid isPermaLink="true">http://forum.veye.cc/topic/682/buildme-failed</guid><dc:creator><![CDATA[Israel_bolo]]></dc:creator><pubDate>Thu, 08 May 2025 05:03:55 GMT</pubDate></item><item><title><![CDATA[Raspberry Pi 5 IMX264 + IMX287]]></title><description><![CDATA[@veye_xumm Thanks
my problem is solved.
]]></description><link>http://forum.veye.cc/topic/660/raspberry-pi-5-imx264-imx287</link><guid isPermaLink="true">http://forum.veye.cc/topic/660/raspberry-pi-5-imx264-imx287</guid><dc:creator><![CDATA[Otca]]></dc:creator><pubDate>Wed, 20 Nov 2024 06:51:03 GMT</pubDate></item><item><title><![CDATA[Raspberry pi 5  6.6.51+rpt-rpi-2712]]></title><description><![CDATA[@opti
Please check this:
https://github.com/veyeimaging/raspberrypi_v4l2/releases/tag/v1.22
]]></description><link>http://forum.veye.cc/topic/654/raspberry-pi-5-6-6-51-rpt-rpi-2712</link><guid isPermaLink="true">http://forum.veye.cc/topic/654/raspberry-pi-5-6-6-51-rpt-rpi-2712</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Fri, 15 Nov 2024 11:35:08 GMT</pubDate></item><item><title><![CDATA[树莓派5 + RAW-MIPI-IMX462M编译出错]]></title><description><![CDATA[@chenhaoyu
这个实现不了，树莓派只有两个mipi口。
]]></description><link>http://forum.veye.cc/topic/645/树莓派5-raw-mipi-imx462m编译出错</link><guid isPermaLink="true">http://forum.veye.cc/topic/645/树莓派5-raw-mipi-imx462m编译出错</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Fri, 01 Nov 2024 07:42:41 GMT</pubDate></item><item><title><![CDATA[树莓派5 一个mipi接口连接相机无法识别问题]]></title><description><![CDATA[@sqf121
这个问题已经解决，请参考一下github上的更新。
https://github.com/veyeimaging/raspberrypi_v4l2
]]></description><link>http://forum.veye.cc/topic/608/树莓派5-一个mipi接口连接相机无法识别问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/608/树莓派5-一个mipi接口连接相机无法识别问题</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Sat, 08 Jun 2024 02:06:22 GMT</pubDate></item><item><title><![CDATA[树莓派5+bookworm +IMX365 遇到问题]]></title><description><![CDATA[pi@raspberrypi:~/raspberrypi_v4l2/i2c_cmd/source $ sudo ./make.sh
问题：
i2c_read.c: In function ‘main’:
i2c_read.c:112:42: warning: passing argument 4 of ‘i2c_rd’ from incompatible pointer type [-Wincompatible-pointer-types]
112 |         i2c_rd(fd, device_addr,reg_addr, &amp;value, num);
|                                          ^~~~~~
|                                          |
|                                          unsigned char (*)[512]
i2c_read.c:20:68: note: expected ‘unsigned char ’ but argument is of type ‘unsigned char ()[512]’
20 | static int i2c_rd(int fd, uint8_t i2c_addr, uint16_t reg, uint8_t *values, uint32_t n)
[image: 1714405783705-5157972e-2e6f-451a-b0df-c2344adf9ed2-001.jpg]
pi@raspberrypi:~/raspberrypi_v4l2/i2c_cmd/source $ dmesg | grep veye
[    2.947096] veyecam2m: loading out-of-tree module taints kernel.
[    2.957137] veyecam2m 4-003b: Unable to load ds90ub954 driver,will go on
[    2.984139] rp1-cfe 1f00110000.csi: found subdevice /axi/pcie@120000/rp1/i2c@88000/veyecam2m@3b
[    2.984914] rp1-cfe 1f00128000.csi: found subdevice /axi/pcie@120000/rp1/i2c@80000/veyecam2m@3b
[    3.082974] veyecam2m 4-003b:  camera id is veyecam2m
[    3.084546] veyecam2m 4-003b: sensor is IMX385
[    3.084552] veyecam2m 4-003b: board type is ONE board
[    3.084970] rp1-cfe 1f00128000.csi: Using sensor veyecam2m 4-003b for capture
[    3.106635] veyecam2m 4-003b: veyecam2m camera probed
[    3.113508] veyecam2m 6-003b: Unable to load ds90ub954 driver,will go on
[    3.229811] veyecam2m 6-003b: probe failed
pi@raspberrypi:~/raspberrypi_v4l2/i2c_cmd/source $ cd
cd raspberrypi_v4l2/rpi5_scripts
./media_setting_rpi5.sh veyecam2mpi@raspberrypi:~ $ cd raspberrypi_v4l2/rpi5_scripts
pi@raspberrypi:~/raspberrypi_v4l2/rpi5_scripts $ ./media_setting_rpi5.sh veyecam2m
This is a Raspberry Pi 5.
camera is YUV type
camera name veyecam2m; width 1920; height 1080; media_fmt UYVY8_1X16; pixel_fmt UYVY
CAM1 probed: media device is /dev/media2
set CAM1 finish, plese get frame from /dev/video0 and use /dev/v4l-subdev2 for camera setting
veyecam2m 6 NOT FOUND
pi@raspberrypi:~/raspberrypi_v4l2/rpi5_scripts $
]]></description><link>http://forum.veye.cc/topic/593/树莓派5-bookworm-imx365-遇到问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/593/树莓派5-bookworm-imx365-遇到问题</guid><dc:creator><![CDATA[fuhesong]]></dc:creator><pubDate>Sat, 27 Apr 2024 16:25:19 GMT</pubDate></item><item><title><![CDATA[IMX-287M: How to synchronize video frame capture with an LED?]]></title><description><![CDATA[@veye_xumm Okay, thank you very much for the replies.
]]></description><link>http://forum.veye.cc/topic/587/imx-287m-how-to-synchronize-video-frame-capture-with-an-led</link><guid isPermaLink="true">http://forum.veye.cc/topic/587/imx-287m-how-to-synchronize-video-frame-capture-with-an-led</guid><dc:creator><![CDATA[etale_cohomology]]></dc:creator><pubDate>Fri, 19 Apr 2024 01:42:46 GMT</pubDate></item><item><title><![CDATA[树莓派4B +IMX462+FFMPEG+meteor master ai 流星监控方案 不断更新]]></title><description><![CDATA[[image: 1713706038286-livepushstream_2024-04-21_04.49.41.300_04.49.44.300_%E6%B5%81%E6%98%9F%E6%95%B01.jpg]
http://hainanftp.net/lx/LivePushStream_2024-04-21_04.49.41.300_04.49.44.300_流星数1.mp4
]]></description><link>http://forum.veye.cc/topic/581/树莓派4b-imx462-ffmpeg-meteor-master-ai-流星监控方案-不断更新</link><guid isPermaLink="true">http://forum.veye.cc/topic/581/树莓派4b-imx462-ffmpeg-meteor-master-ai-流星监控方案-不断更新</guid><dc:creator><![CDATA[fuhesong]]></dc:creator><pubDate>Sun, 31 Mar 2024 15:09:24 GMT</pubDate></item><item><title><![CDATA[树梅派4B 如何搭建RTSP？]]></title><description><![CDATA[已解决，请访问
https://forum.veye.cc/topic/581/树莓派4b-imx462-ffmpeg-meteor-master-ai-流星监控方案-不断更新
]]></description><link>http://forum.veye.cc/topic/578/树梅派4b-如何搭建rtsp</link><guid isPermaLink="true">http://forum.veye.cc/topic/578/树梅派4b-如何搭建rtsp</guid><dc:creator><![CDATA[fuhesong]]></dc:creator><pubDate>Tue, 26 Mar 2024 12:51:39 GMT</pubDate></item><item><title><![CDATA[树莓派64位连接CS-MIPI-IMX307问题]]></title><description><![CDATA[@veye_xumm 楼主，我用的这个微雪的树莓派CM4扩展板，
https://www.waveshare.net/wiki/CM4-IO-BASE-A
能麻烦帮我看看么？
]]></description><link>http://forum.veye.cc/topic/570/树莓派64位连接cs-mipi-imx307问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/570/树莓派64位连接cs-mipi-imx307问题</guid><dc:creator><![CDATA[fancong]]></dc:creator><pubDate>Mon, 18 Mar 2024 14:44:41 GMT</pubDate></item><item><title><![CDATA[树莓派5下MV_IMX287使用mv_mipi_i2c.sh错误]]></title><description><![CDATA[@veye_xumm 好的，已经解决了感谢
]]></description><link>http://forum.veye.cc/topic/562/树莓派5下mv_imx287使用mv_mipi_i2c-sh错误</link><guid isPermaLink="true">http://forum.veye.cc/topic/562/树莓派5下mv_imx287使用mv_mipi_i2c-sh错误</guid><dc:creator><![CDATA[hujun]]></dc:creator><pubDate>Tue, 27 Feb 2024 12:18:37 GMT</pubDate></item><item><title><![CDATA[veye_mipi_i2c.sh Raspberry Pi 5]]></title><description><![CDATA[@natzguk
Raspberry Pi 5 is special, its i2c bus is 4 and 6. meanwhile, Raspberry Pi need to configure the parameters in advance, please refer to this link below:
https://wiki.veye.cc/index.php/V4L2_mode_for_Raspberry_Pi#Raspberry_Pi_5_Setting
]]></description><link>http://forum.veye.cc/topic/555/veye_mipi_i2c-sh-raspberry-pi-5</link><guid isPermaLink="true">http://forum.veye.cc/topic/555/veye_mipi_i2c-sh-raspberry-pi-5</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Mon, 05 Feb 2024 12:01:02 GMT</pubDate></item><item><title><![CDATA[How to set exposure for IMX-287M?]]></title><description><![CDATA[@etale_cohomology said in How to set exposure for IMX-287M?:

It turns out you must manually select the I2C bus number (I also enabled I2C on raspi-config). Since I'm using CAM0 on RPI5, the bus is 6. Example:
./mv_mipi_i2c.sh -r -f manufacturer -b 6
This works.

Yes
]]></description><link>http://forum.veye.cc/topic/550/how-to-set-exposure-for-imx-287m</link><guid isPermaLink="true">http://forum.veye.cc/topic/550/how-to-set-exposure-for-imx-287m</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Wed, 24 Jan 2024 23:38:35 GMT</pubDate></item><item><title><![CDATA[树莓派的流模式和硬触发模式]]></title><description><![CDATA[@lizi 好的。
]]></description><link>http://forum.veye.cc/topic/549/树莓派的流模式和硬触发模式</link><guid isPermaLink="true">http://forum.veye.cc/topic/549/树莓派的流模式和硬触发模式</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Tue, 23 Jan 2024 05:36:38 GMT</pubDate></item><item><title><![CDATA[IMX287M on CM4 Bullseye 11 Linux 6.1.21]]></title><description><![CDATA[@etale_cohomology
[image: 1702967744898-080d6fcb-12e7-4338-800a-b7ef90734db4-image.png]
I think the FFC cable direction is wrong here.
]]></description><link>http://forum.veye.cc/topic/508/imx287m-on-cm4-bullseye-11-linux-6-1-21</link><guid isPermaLink="true">http://forum.veye.cc/topic/508/imx287m-on-cm4-bullseye-11-linux-6-1-21</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Mon, 18 Dec 2023 23:07:42 GMT</pubDate></item><item><title><![CDATA[RaspberryPi OS 64-bit]]></title><description><![CDATA[@veye_xumm For anyone else. This works perfectly. Note that when recompiling on 64-bit Pi, the following warning is produced. It still builds. Just copy the outputs to bin and the scripts work fine.
./make.sh
i2c_read.c: In function ‘main’:
i2c_read.c:112:35: warning: passing argument 4 of ‘i2c_rd’ from incompatible pointer type [-Wincompatible-pointer-types]
  112 |  i2c_rd(fd, device_addr,reg_addr, &amp;value, num);
      |                                   ^~~~~~
      |                                   |
      |                                   unsigned char (*)[512]
i2c_read.c:20:68: note: expected ‘unsigned char *’ but argument is of type ‘unsigned char (*)[512]’
   20 | static int i2c_rd(int fd, uint8_t i2c_addr, uint16_t reg, uint8_t *values, uint32_t n)

]]></description><link>http://forum.veye.cc/topic/496/raspberrypi-os-64-bit</link><guid isPermaLink="true">http://forum.veye.cc/topic/496/raspberrypi-os-64-bit</guid><dc:creator><![CDATA[newleaf]]></dc:creator><pubDate>Fri, 01 Dec 2023 17:40:10 GMT</pubDate></item><item><title><![CDATA[Debian 12 - Bookworm driver]]></title><description><![CDATA[@natzguk
I believe the code is compatible. You can refer to the following link and try compiling it yourself:
https://wiki.veye.cc/index.php/Build_drivers_from_source_for_rpi
]]></description><link>http://forum.veye.cc/topic/459/debian-12-bookworm-driver</link><guid isPermaLink="true">http://forum.veye.cc/topic/459/debian-12-bookworm-driver</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Sat, 14 Oct 2023 16:39:55 GMT</pubDate></item><item><title><![CDATA[MV-MIPI-IMX264M+CM4+CM4-NANO-A 需要怎么配置？]]></title><description><![CDATA[@maifengw2023
@veye_xumm said in MV-MIPI-IMX264M+CM4+CM4-NANO-A 需要怎么配置？:

根据原理图，微雪的CM4-NANO-A所引出的CAMERA接口应该是跟树莓派官方的CMIO4板子的cam0一样的。
树莓派4b实际上引出的是cam1。
问题： 你用微雪的CM4-IO-BASE-A，是不是两个摄像头插口都调通了？ 如果没有，那么，首先调通它。 然后再调CM4-NANO-A就顺理成章了。

现在我们给出的技术建议就是这个方向。在我看来，应该不需要改驱动代码的。
如果你现在放弃，我也没有办法了。
]]></description><link>http://forum.veye.cc/topic/452/mv-mipi-imx264m-cm4-cm4-nano-a-需要怎么配置</link><guid isPermaLink="true">http://forum.veye.cc/topic/452/mv-mipi-imx264m-cm4-cm4-nano-a-需要怎么配置</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Mon, 09 Oct 2023 08:32:49 GMT</pubDate></item><item><title><![CDATA[Raspberry pi 4b +imx264]]></title><description><![CDATA[@yun 你这个i2c找不到设备啊。 方便的话把整套模组寄过来我们检查一下。
]]></description><link>http://forum.veye.cc/topic/418/raspberry-pi-4b-imx264</link><guid isPermaLink="true">http://forum.veye.cc/topic/418/raspberry-pi-4b-imx264</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Wed, 28 Jun 2023 02:03:11 GMT</pubDate></item><item><title><![CDATA[MV-MIPI-IMX178M+树莓派4B+OSPI5.15，官网例程不能使用]]></title><description><![CDATA[@veye_xumm
感谢！
]]></description><link>http://forum.veye.cc/topic/403/mv-mipi-imx178m-树莓派4b-ospi5-15-官网例程不能使用</link><guid isPermaLink="true">http://forum.veye.cc/topic/403/mv-mipi-imx178m-树莓派4b-ospi5-15-官网例程不能使用</guid><dc:creator><![CDATA[maifengW2023]]></dc:creator><pubDate>Tue, 09 May 2023 02:25:13 GMT</pubDate></item><item><title><![CDATA[raspi 4b 64bits 怎么用MV IMX296 实现快速采集]]></title><description><![CDATA[@hujun
脚本的话，一般调度和处理都是很慢的。 执行最快的办法是用c/c++写应用程序。或者用python调用底层为c/c++写的库。你可以参考6.5.2的yavta的代码。
]]></description><link>http://forum.veye.cc/topic/392/raspi-4b-64bits-怎么用mv-imx296-实现快速采集</link><guid isPermaLink="true">http://forum.veye.cc/topic/392/raspi-4b-64bits-怎么用mv-imx296-实现快速采集</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Fri, 07 Apr 2023 12:38:27 GMT</pubDate></item><item><title><![CDATA[MV-MIPI-IMX265M+Raspberry pi4 5.15.84]]></title><description><![CDATA[@cys 不客气。
核心问题就是现在树莓派的header安装包管理的不好。
]]></description><link>http://forum.veye.cc/topic/382/mv-mipi-imx265m-raspberry-pi4-5-15-84</link><guid isPermaLink="true">http://forum.veye.cc/topic/382/mv-mipi-imx265m-raspberry-pi4-5-15-84</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Wed, 29 Mar 2023 08:40:07 GMT</pubDate></item></channel></rss>