<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Jetson App Software]]></title><description><![CDATA[Jetson App Software]]></description><link>http://forum.veye.cc/category/8</link><generator>RSS for Node</generator><lastBuildDate>Thu, 28 May 2026 13:36:08 GMT</lastBuildDate><atom:link href="http://forum.veye.cc/category/8.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 17 May 2025 11:10:59 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[[AR0234M][XavierNX][JP5.1.4] Upgrading from 2 lanes to 4 lanes]]></title><description><![CDATA[@dragos You are welcome.
]]></description><link>http://forum.veye.cc/topic/684/ar0234m-xaviernx-jp5-1-4-upgrading-from-2-lanes-to-4-lanes</link><guid isPermaLink="true">http://forum.veye.cc/topic/684/ar0234m-xaviernx-jp5-1-4-upgrading-from-2-lanes-to-4-lanes</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Sat, 17 May 2025 11:10:59 GMT</pubDate></item><item><title><![CDATA[SC535M设置默认相机参数画面显示不正常的问题]]></title><description><![CDATA[经过验证，xavier平台可以通过设置配置prefer_stride为64，分辨率是2432x2048的大小。但是tx2平台不行，还是得要求256的整数倍。
]]></description><link>http://forum.veye.cc/topic/647/sc535m设置默认相机参数画面显示不正常的问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/647/sc535m设置默认相机参数画面显示不正常的问题</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Mon, 04 Nov 2024 05:54:41 GMT</pubDate></item><item><title><![CDATA[jetson tx2 + SC535M 一拖五 jetpack 4.6.x的驱动问题]]></title><description><![CDATA[@dangal
你已经搞成了。
由于你只在i2c-30上接入了一个，因此只识别到了一个相机。其他i2c 31-35都报了读取寄存器错误，这是正常的。
]]></description><link>http://forum.veye.cc/topic/643/jetson-tx2-sc535m-一拖五-jetpack-4-6-x的驱动问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/643/jetson-tx2-sc535m-一拖五-jetpack-4-6-x的驱动问题</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Mon, 28 Oct 2024 09:41:18 GMT</pubDate></item><item><title><![CDATA[Jetson Nano B01 MV IMX264]]></title><description><![CDATA[@otca I will continue discussing that issue with you in the other post.
]]></description><link>http://forum.veye.cc/topic/634/jetson-nano-b01-mv-imx264</link><guid isPermaLink="true">http://forum.veye.cc/topic/634/jetson-nano-b01-mv-imx264</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Tue, 03 Sep 2024 16:55:25 GMT</pubDate></item><item><title><![CDATA[RAW-MIPI-AR0234M 在NX平台下，2lane和4 lanes都无法采图]]></title><description><![CDATA[@leibnitz
是的，qv4l2拿到图像，进行转码，搬移，预览，做了很多工作。整个pipeline的冗长和软件效率的问题导致预览无法达到相机的输出能力。
用下面https://wiki.veye.cc/index.php/Mv_series_camera_appnotes_4_jetson/zh#.E5.B8.A7.E7.8E.87.E7.BB.9F.E8.AE.A1
7.3.2 帧率统计
的命令来统计一下实际相机输出的帧率。
]]></description><link>http://forum.veye.cc/topic/632/raw-mipi-ar0234m-在nx平台下-2lane和4-lanes都无法采图</link><guid isPermaLink="true">http://forum.veye.cc/topic/632/raw-mipi-ar0234m-在nx平台下-2lane和4-lanes都无法采图</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Wed, 21 Aug 2024 11:16:39 GMT</pubDate></item><item><title><![CDATA[jetson系列csi和mv相机基于JetPack_4.6.5的驱动支持]]></title><description><![CDATA[@fancong
请参考：
https://github.com/veyeimaging/nvidia_jetson_veye_bsp/releases/tag/v1.29
]]></description><link>http://forum.veye.cc/topic/626/jetson系列csi和mv相机基于jetpack_4-6-5的驱动支持</link><guid isPermaLink="true">http://forum.veye.cc/topic/626/jetson系列csi和mv相机基于jetpack_4-6-5的驱动支持</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Fri, 26 Jul 2024 06:46:51 GMT</pubDate></item><item><title><![CDATA[reComputer Xavier+327S stress testing - dma_alloc_coherent failed]]></title><description><![CDATA[@newleaf BTW, the I2C features are nice and work quite well. Was able to port the code over to Go. 
]]></description><link>http://forum.veye.cc/topic/584/recomputer-xavier-327s-stress-testing-dma_alloc_coherent-failed</link><guid isPermaLink="true">http://forum.veye.cc/topic/584/recomputer-xavier-327s-stress-testing-dma_alloc_coherent-failed</guid><dc:creator><![CDATA[newleaf]]></dc:creator><pubDate>Fri, 05 Apr 2024 08:55:36 GMT</pubDate></item><item><title><![CDATA[基于VEYE系列相机CSI_IMX307的HTTP&#x2F;RTSP推流方案]]></title><link>http://forum.veye.cc/topic/582/基于veye系列相机csi_imx307的http-rtsp推流方案</link><guid isPermaLink="true">http://forum.veye.cc/topic/582/基于veye系列相机csi_imx307的http-rtsp推流方案</guid><pubDate>Tue, 02 Apr 2024 08:45:55 GMT</pubDate></item><item><title><![CDATA[reComputer J202 Nano and 327S I2C bus issue]]></title><description><![CDATA[Just wanted to provide a followup on this. Reached out to Seeed and they said they would order a camera and investigate further.
I also had some success on the Nano by reducing the cable length between the Nano and the camera (using a CSI-HDMI adapter from Arducam). Worked sometimes on first boot. Then stopped.
Regardless, we are nearing a deadline and decided to switch to the Xavier for a prototype. The Nano has been challenging due to reduced support from NVIDIA.
I believe you are right about device tree. Something different from first boot compared to reboot. Even with the longer cable, it was 100% consistent with this strange behavior.
]]></description><link>http://forum.veye.cc/topic/575/recomputer-j202-nano-and-327s-i2c-bus-issue</link><guid isPermaLink="true">http://forum.veye.cc/topic/575/recomputer-j202-nano-and-327s-i2c-bus-issue</guid><dc:creator><![CDATA[newleaf]]></dc:creator><pubDate>Sun, 24 Mar 2024 23:22:54 GMT</pubDate></item><item><title><![CDATA[normal trigger和High-speed trigger 有什么区别]]></title><description><![CDATA[@lizi said in normal trigger和High-speed trigger 有什么区别:

这个的1和2是有什么区别吗？

2只有MV-MIPI-IMX178M支持，具体你可以看看这个地方。
@lizi said in normal trigger和High-speed trigger 有什么区别:

这里配置的这个时间是什么时间？

触发间隔。可以参考这个地方。
]]></description><link>http://forum.veye.cc/topic/566/normal-trigger和high-speed-trigger-有什么区别</link><guid isPermaLink="true">http://forum.veye.cc/topic/566/normal-trigger和high-speed-trigger-有什么区别</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Tue, 05 Mar 2024 03:03:15 GMT</pubDate></item><item><title><![CDATA[ROS开发相关]]></title><description><![CDATA[@chenxy 不好意思ros的我们暂时没有提供demo。
]]></description><link>http://forum.veye.cc/topic/464/ros开发相关</link><guid isPermaLink="true">http://forum.veye.cc/topic/464/ros开发相关</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Wed, 25 Oct 2023 02:04:45 GMT</pubDate></item><item><title><![CDATA[磁盘空间满了 开机黑屏  如何强制进入命令行]]></title><description><![CDATA[@sugarrr 请查询一下nvidia的资料，或者到nvidia的forum上提问一下，他们这个论坛恢复挺及时，应该会有专业的恢复。
]]></description><link>http://forum.veye.cc/topic/444/磁盘空间满了-开机黑屏-如何强制进入命令行</link><guid isPermaLink="true">http://forum.veye.cc/topic/444/磁盘空间满了-开机黑屏-如何强制进入命令行</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Tue, 19 Sep 2023 02:31:13 GMT</pubDate></item><item><title><![CDATA[Jetson Nano 开发板套件 磁盘空间满了 开机失败 现已经强制进入命令控制行 想要删除一些内容 但出现sudo dpkg --configure -a 未连接网络 如何命令行连接wifi]]></title><description><![CDATA[此问题已线下解决，问题关闭。
]]></description><link>http://forum.veye.cc/topic/433/jetson-nano-开发板套件-磁盘空间满了-开机失败-现已经强制进入命令控制行-想要删除一些内容-但出现sudo-dpkg-configure-a-未连接网络-如何命令行连接wifi</link><guid isPermaLink="true">http://forum.veye.cc/topic/433/jetson-nano-开发板套件-磁盘空间满了-开机失败-现已经强制进入命令控制行-想要删除一些内容-但出现sudo-dpkg-configure-a-未连接网络-如何命令行连接wifi</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Fri, 01 Sep 2023 03:41:38 GMT</pubDate></item><item><title><![CDATA[jetson nano 2GB无法识别相机	MV-MIPI-IMX264M]]></title><description><![CDATA[@hmj
@hmj said in jetson nano 2GB无法识别相机 MV-MIPI-IMX264M:

出厂值后,出现如下错误
[   57.016386] mvcam 7-003b: camera_common_mclk_enable: no device power rail
[   57.525021] mvcam 7-003b: camera_common_mclk_disable: no device power rail
[   57.531930] mvcam 8-003b: camera_common_mclk_enable: no device power rail
[   58.040414] mvcam 8-003b: camera_common_mclk_disable: no device power rail
[   58.047311] mvcam 7-003b: camera_common_mclk_enable: no device power rail
[   58.555198] mvcam 7-003b: csi2_try format
[   58.555205] mvcam 7-003b: mvcam_csi2_get_fmt_idx_by_code success
[   58.613896] video4linux video0: tegra_channel_s_ctrl: 10100856 set vi timeout disable 1

看起来这个没有错误。 不过你的程序好像给配置成了触发模式。
相机的参数是可以保存的，只要你通过脚本调用一下paramsave。
我的建议是你把摄像头恢复默认值——这样也就恢复为了图像流模式。
不要运行你的现在的程序——配置为触发啊之类的。
然后用qv4l2程序来取图看看。
]]></description><link>http://forum.veye.cc/topic/428/jetson-nano-2gb无法识别相机-mv-mipi-imx264m</link><guid isPermaLink="true">http://forum.veye.cc/topic/428/jetson-nano-2gb无法识别相机-mv-mipi-imx264m</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Mon, 07 Aug 2023 08:54:02 GMT</pubDate></item><item><title><![CDATA[jetson NX使用RAW-MIPI-SC132M驱动配置]]></title><description><![CDATA[@lb 这个产品不支持自动曝光，支持手动曝光。但是不是通过V4L2接口，而是通过shell脚本直接写寄存器的形式实现的。
具体可以参考：
https://wiki.veye.cc/index.php/RAW-MIPI-SC132M_Index
mv_mipi_i2c.sh 使用说明章节。
]]></description><link>http://forum.veye.cc/topic/402/jetson-nx使用raw-mipi-sc132m驱动配置</link><guid isPermaLink="true">http://forum.veye.cc/topic/402/jetson-nx使用raw-mipi-sc132m驱动配置</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Thu, 04 May 2023 09:01:18 GMT</pubDate></item><item><title><![CDATA[jetson-Nano emmc版本载板的veye驱动文件]]></title><description><![CDATA[@panguin
@panguin said in jetson-Nano emmc版本载板的veye驱动文件:

您所说的extlinux.conf文件指的是主机还是开发板上的目录，应该是开发板吧？

是的
]]></description><link>http://forum.veye.cc/topic/384/jetson-nano-emmc版本载板的veye驱动文件</link><guid isPermaLink="true">http://forum.veye.cc/topic/384/jetson-nano-emmc版本载板的veye驱动文件</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Fri, 31 Mar 2023 02:29:04 GMT</pubDate></item><item><title><![CDATA[VEYE IMX-307 MIPI CSI camera drivers not working on Jetpack 5.0.2]]></title><description><![CDATA[@veye_xumm
Hi,
We are using Orin 32G and we have installed the jetpack on Nvme M.2 ssd. We will remove the ssd and try installing it in emmc storage.
]]></description><link>http://forum.veye.cc/topic/347/veye-imx-307-mipi-csi-camera-drivers-not-working-on-jetpack-5-0-2</link><guid isPermaLink="true">http://forum.veye.cc/topic/347/veye-imx-307-mipi-csi-camera-drivers-not-working-on-jetpack-5-0-2</guid><dc:creator><![CDATA[meontechno]]></dc:creator><pubDate>Tue, 14 Feb 2023 03:49:19 GMT</pubDate></item><item><title><![CDATA[jetson nano 在移植核后无法再烧录镜像]]></title><description><![CDATA[@powerliusu
你的这几个操作并没有必然逻辑的相关性。
@powerliusu said in jetson nano 在移植核后无法再烧录镜像:

apt-mark hold

这个的作用是标记一下防止后面apt upgrade的时候把kernel也升级掉。本身不是必须的步骤，你可以先忽略掉它。
@powerliusu said in jetson nano 在移植核后无法再烧录镜像:

i2cdetect 总线1的10寄存器数值改了

这个命令的作用是检测某个i2cbus上存在哪些i2c设备，你用的是nanoa02,对应的i2cbus应该是6。 替换完成Image和dtb之后，重启，然后用i2cdetect -y -r 6作为辅助调试手段即可。
至于sd卡无法烧录，建议你格式化这个tf卡后再试一次，或者换个tf卡试一下。
整体上而言，步骤是：烧写标准系统--&gt;更新Image和dtb--&gt;系统重启--&gt;检测状态。
]]></description><link>http://forum.veye.cc/topic/340/jetson-nano-在移植核后无法再烧录镜像</link><guid isPermaLink="true">http://forum.veye.cc/topic/340/jetson-nano-在移植核后无法再烧录镜像</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Mon, 30 Jan 2023 08:59:27 GMT</pubDate></item><item><title><![CDATA[AGX Xavier使用385问题]]></title><description><![CDATA[@bouncy

打印出来的帧率从30.26缓慢下降到30.00

这个是正常的。因为这个程序统计帧率是每秒钟统计一次，第一次统计会有1帧的误差，后面会逐渐逼近到最准确的数。

画面依然出现卡顿现象，请问这个原因可能是由什么引起的。

这个比较奇怪，在我这运行完全没问题。这里面用到的nvidconv是使用了硬件资源的。而且agx xavier性能干这点活，完全没有问题。
不知你的机器有没有同时干其他工作？ 可以用jtop分析一下。
]]></description><link>http://forum.veye.cc/topic/300/agx-xavier使用385问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/300/agx-xavier使用385问题</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Thu, 10 Nov 2022 02:56:28 GMT</pubDate></item><item><title><![CDATA[R32.7.2 内核编译报错]]></title><description><![CDATA[@false_anomaly 不客气
]]></description><link>http://forum.veye.cc/topic/270/r32-7-2-内核编译报错</link><guid isPermaLink="true">http://forum.veye.cc/topic/270/r32-7-2-内核编译报错</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Wed, 24 Aug 2022 19:58:50 GMT</pubDate></item><item><title><![CDATA[AGX Orin Jetpack5.x 编译modules问题]]></title><description><![CDATA[@leeechsh 5.0.2上面我们已经发布了CS系列和VEYE系列的驱动。您可以参考一下。
]]></description><link>http://forum.veye.cc/topic/269/agx-orin-jetpack5-x-编译modules问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/269/agx-orin-jetpack5-x-编译modules问题</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Sun, 21 Aug 2022 03:18:24 GMT</pubDate></item><item><title><![CDATA[Orin上使用IMX307的问题]]></title><description><![CDATA[@leeechsh 不需要
]]></description><link>http://forum.veye.cc/topic/267/orin上使用imx307的问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/267/orin上使用imx307的问题</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Sun, 14 Aug 2022 02:19:20 GMT</pubDate></item><item><title><![CDATA[cssc132问题。]]></title><description><![CDATA[@simon 移植并不复杂，关键是你要有

底板厂家的支持。
或者
底板厂家开放他们的代码。

我们opensource的，但是只能是基于nvidia原厂的板子做的。
]]></description><link>http://forum.veye.cc/topic/242/cssc132问题</link><guid isPermaLink="true">http://forum.veye.cc/topic/242/cssc132问题</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Thu, 19 May 2022 08:27:19 GMT</pubDate></item><item><title><![CDATA[Support VEYE-MIP-IMX462 on L4T4.6.1]]></title><description><![CDATA[@lich-mk
We are in development and expect to release it within 1 week.
]]></description><link>http://forum.veye.cc/topic/238/support-veye-mip-imx462-on-l4t4-6-1</link><guid isPermaLink="true">http://forum.veye.cc/topic/238/support-veye-mip-imx462-on-l4t4-6-1</guid><dc:creator><![CDATA[veye_xumm]]></dc:creator><pubDate>Tue, 17 May 2022 20:01:16 GMT</pubDate></item></channel></rss>