<![CDATA[CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功]]>CSFTPIMAX.pdf

如pdf所描述，无法连接摄像头

]]>http://forum.veye.cc/topic/411/cs-fpd-cam-imx327摄像头树莓派驱动模式连接不成功RSS for NodeThu, 10 Sep 2026 10:51:11 GMTFri, 09 Jun 2023 03:08:17 GMT60<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Tue, 13 Jun 2023 08:27:26 GMT]]>@刚子 不客气。 vlc本身的缓存比较大。你可以试试gstreamer，或者降低一下vlc的缓存。

]]>http://forum.veye.cc/post/2708http://forum.veye.cc/post/2708Tue, 13 Jun 2023 08:27:26 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Tue, 13 Jun 2023 07:52:13 GMT]]>@veye_xumm 非常感谢，已经成功连接了，在树梅派上用VLC显示，感觉有1s的延时

]]>http://forum.veye.cc/post/2707http://forum.veye.cc/post/2707Tue, 13 Jun 2023 07:52:13 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Tue, 13 Jun 2023 07:26:28 GMT]]>@刚子 e9f2956b-702d-4a17-8990-afb0a075847a-image.png
这个地方不要接。
5ce905f6-6933-4827-8cc3-f45976f5e9f0-image.png
同轴线插到J3。

另外，12V的电给到fpdlink的板子了吗?
不要带电插拔fpc线。

]]>http://forum.veye.cc/post/2706http://forum.veye.cc/post/2706Tue, 13 Jun 2023 07:26:28 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Tue, 13 Jun 2023 07:22:28 GMT]]>@veye_xumm
连接方式
微信图片_20230613151639.png 微信图片_20230613151634.png 微信图片_20230613151627.png

]]>http://forum.veye.cc/post/2704http://forum.veye.cc/post/2704Tue, 13 Jun 2023 07:22:28 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Tue, 13 Jun 2023 07:13:42 GMT]]>@veye_xumm
错误1 /etc//rc.local中增加的这行，关键字是dtoverlay，你多写了一个c。 已经修改
显示如下
lingchuang@raspberrypi:~ $ dmesg |grep veye
[ 14.024096] veyecam2m 10-003b: probe failed
lingchuang@raspberrypi:~ $

]]>http://forum.veye.cc/post/2703http://forum.veye.cc/post/2703Tue, 13 Jun 2023 07:13:42 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Tue, 13 Jun 2023 07:01:13 GMT]]>@veye_xumm 使用你们自带的异侧线，供电12V 直流，应该没问题，之前的方式已经连接成功。

]]>http://forum.veye.cc/post/2702http://forum.veye.cc/post/2702Tue, 13 Jun 2023 07:01:13 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Tue, 13 Jun 2023 06:51:30 GMT]]>@刚子
有两个问题。

  1. /etc//rc.local中增加的这行，关键字是dtoverlay，你多写了一个c。
    所以现在表现的是veyecam2m驱动并没有加载上，dmesg | grep veye指令没有任何打印信息。
  2. 系统初始化probe fpdlink的接收模块的时候，提示报错。应该是硬件连接的问题。
    请检查：
    2.1 是否供电正确？
    2.2 FFC 排线是否方向正确？
]]>http://forum.veye.cc/post/2701http://forum.veye.cc/post/2701Tue, 13 Jun 2023 06:51:30 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Tue, 13 Jun 2023 06:25:04 GMT]]>@veye_xumm lingchuang@raspberrypi:~ $ tail /boot/config.txt

Run as fast as firmware / board allows

arm_boost=1

[all]
gpu_mem=128
dtparam=i2c_vc=on
arm_64bit=0
dtoverlay=ds90ub954
gpu_mem=256
#dtoverlay=veyecam2m
lingchuang@raspberrypi:~ $ cat /etc//rc.local
#!/bin/sh -e

rc.local

This script is executed at the end of each multiuser runlevel.

Make sure that the script will "exit 0" on success or any other

value on error.

In order to enable or disable this script just change the execution

bits.

By default this script does nothing.

Print the IP address

_IP=$(hostname -I) || true
if [ "$_IP" ]; then
printf "My IP address is %s\n" "$_IP"
fi
sleep 1;sudo dtcoverlay veyecam2m
exit 0
lingchuang@raspberrypi:~ $ dmesg |grep veye
lingchuang@raspberrypi:~ $ dmesg |grep 954
[ 5.895480] systemd[1]: Listening on udev Control Socket.
[ 11.120745] ds90ub954: loading out-of-tree module taints kernel.
[ 11.122072] i2c-ds90ub954 10-0030: ds90ub954_probe: start
[ 11.122091] i2c-ds90ub954 10-0030: ds90ub954_parse_dt: deserializer:
[ 11.122116] i2c-ds90ub954 10-0030: pass-gpio not found, ignoring
[ 11.122244] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: parsing serializers device tree:
[ 11.122267] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found
[ 11.122279] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0
[ 11.122291] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found
[ 11.122303] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0
[ 11.122315] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found
[ 11.122327] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0
[ 11.122339] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found
[ 11.122351] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0
[ 11.122363] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio0-control property not found
[ 11.122374] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000
[ 11.122386] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio1-control property not found
[ 11.122397] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000
[ 11.122409] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio2-control property not found
[ 11.122420] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000
[ 11.122433] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - gpio3-control property not found
[ 11.122443] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000
[ 11.122456] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - hs-clk-div property not found
[ 11.122467] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4)
[ 11.122480] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - div-m-val property not found
[ 11.122491] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1
[ 11.122503] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - div-n-val property not found
[ 11.122514] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28
[ 11.122653] i2c-ds90ub954 10-0030: ds90ub953_i2c_client init client done
[ 11.122726] i2c-ds90ub954 10-0030: ds90ub953_regmap_init init regmap done
[ 11.122805] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - virtual-channel-map property not found
[ 11.122817] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: - virtual-channel-map set to default val: 0xE4
[ 11.122828] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: serializer 0 successfully parsed
[ 11.122843] i2c-ds90ub954 10-0030: ds90ub953_parse_dt: done
[ 11.122854] i2c-ds90ub954 10-0030: ds90ub954_init starting
[ 11.127312] i2c-ds90ub954 10-0030: ds90ub954_init: device ID: 0x60, code:_UB954, revision: 0x20
[ 11.644062] i2c-ds90ub954 10-0030: ds90ub954_init: start init of serializer rx_port 0
[ 12.614231] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=0 x 10ms
[ 12.644197] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=1 x 10ms
[ 12.674230] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=2 x 10ms
[ 12.704210] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=3 x 10ms
[ 12.734180] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=4 x 10ms
[ 12.764177] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=5 x 10ms
[ 12.794178] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=6 x 10ms
[ 12.824204] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=7 x 10ms
[ 12.864201] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=8 x 10ms
[ 12.894663] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=9 x 10ms
[ 12.924179] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=10 x 10ms
[ 12.955602] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=11 x 10ms
[ 12.994205] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=12 x 10ms
[ 13.024258] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=13 x 10ms
[ 13.054206] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=14 x 10ms
[ 13.084297] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=15 x 10ms
[ 13.114304] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=16 x 10ms
[ 13.144178] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=17 x 10ms
[ 13.174184] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=18 x 10ms
[ 13.204235] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=19 x 10ms
[ 13.234262] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=20 x 10ms
[ 13.264236] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=21 x 10ms
[ 13.294175] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=22 x 10ms
[ 13.324189] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=23 x 10ms
[ 13.354255] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=24 x 10ms
[ 13.384248] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=25 x 10ms
[ 13.414222] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=26 x 10ms
[ 13.444192] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=27 x 10ms
[ 13.474281] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=28 x 10ms
[ 13.504223] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=29 x 10ms
[ 13.534201] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=30 x 10ms
[ 13.564190] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=31 x 10ms
[ 13.599568] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=32 x 10ms
[ 13.624208] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=33 x 10ms
[ 13.664255] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=34 x 10ms
[ 13.694247] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=35 x 10ms
[ 13.724242] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=36 x 10ms
[ 13.754211] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=37 x 10ms
[ 13.784222] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=38 x 10ms
[ 13.814211] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=39 x 10ms
[ 13.844213] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=40 x 10ms
[ 13.874203] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=41 x 10ms
[ 13.904183] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=42 x 10ms
[ 13.934173] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=43 x 10ms
[ 13.964321] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=44 x 10ms
[ 13.994200] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=45 x 10ms
[ 14.024269] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=46 x 10ms
[ 14.054195] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=47 x 10ms
[ 14.084233] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=48 x 10ms
[ 14.114172] i2c-ds90ub954 10-0030: ds90ub954_init: DEVICE STS: 0xd3, id=49 x 10ms
[ 14.114194] i2c-ds90ub954 10-0030: ds90ub954_init: Backchannel setup failed!
[ 14.114205] i2c-ds90ub954 10-0030: ds90ub954_init: init deserializer rx_port 0 failed
[ 14.114216] i2c-ds90ub954 10-0030: ds90ub954_init: deserializer rx_port 0 is deactivated
[ 14.116756] i2c-ds90ub954 10-0030: ds90ub954_probe: init ds90ub954_done

]]>http://forum.veye.cc/post/2700http://forum.veye.cc/post/2700Tue, 13 Jun 2023 06:25:04 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 10:04:29 GMT]]>@刚子 不好意思，刚才两个命令写错了

dmesg | grep veye

dmesg | grep 954
]]>http://forum.veye.cc/post/2699http://forum.veye.cc/post/2699Mon, 12 Jun 2023 10:04:29 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 09:55:18 GMT]]>@veye_xumm 2023-06-12-175402_591x634_scrot.png 重启后就是这个状态了

]]>http://forum.veye.cc/post/2698http://forum.veye.cc/post/2698Mon, 12 Jun 2023 09:55:18 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 09:42:39 GMT]]>@刚子 驱动模式下，执行下面几个命令给我看看

tail /boot/config.txt

cat /etc/rc.local

dmesg | veye grep 

dmesg | veye 954
]]>http://forum.veye.cc/post/2697http://forum.veye.cc/post/2697Mon, 12 Jun 2023 09:42:39 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 09:30:56 GMT]]>@veye_xumm 驱动模式也试验了，现在所有驱动都安装成功了，配置修改完成后执行dmesg | grep veye 显示执行错误，重启后执行该命令，无反馈信息

]]>http://forum.veye.cc/post/2696http://forum.veye.cc/post/2696Mon, 12 Jun 2023 09:30:56 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 09:17:11 GMT]]>@刚子 你不是要用驱动模式吗？
https://wiki.veye.cc/index.php/V4L2_mode_for_Raspberry_Pi/zh
参考这个文章。

]]>http://forum.veye.cc/post/2695http://forum.veye.cc/post/2695Mon, 12 Jun 2023 09:17:11 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 08:47:01 GMT]]>@veye_xumm 这种方式连接无法获取图像，命令：./veye_raspipreview -t 20000 -md 1 -p '0,0,1280,720'

]]>http://forum.veye.cc/post/2694http://forum.veye.cc/post/2694Mon, 12 Jun 2023 08:47:01 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 08:37:57 GMT]]>@刚子 de27c10f-95df-44e0-ab1a-b59d4c7c2fe7-image.png
这两个是直接扣起来的，我们已经给你装好了。不要再接其他的排线出来，到处乱插了。
c42feb9e-3976-4bb7-ba19-d179b3f5386f-image.png

]]>http://forum.veye.cc/post/2693http://forum.veye.cc/post/2693Mon, 12 Jun 2023 08:37:57 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 08:35:59 GMT]]>@veye_xumm 微信图片_20230612163436.png

]]>http://forum.veye.cc/post/2692http://forum.veye.cc/post/2692Mon, 12 Jun 2023 08:35:59 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 08:17:45 GMT]]>@刚子 7321f96e-93f0-4c03-ab91-458fb6fbd58d-image.png
这两个板子拆开，拍照我看看

]]>http://forum.veye.cc/post/2691http://forum.veye.cc/post/2691Mon, 12 Jun 2023 08:17:45 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 08:11:57 GMT]]>@veye_xumm 都是在你们家一起买的。我们的板子不插排线时连不上摄像头，但是我们买的就是不插排线的版本，这是怎么回事，如何处理？微信图片_20230612133721.png 微信图片_20230612133716.png 微信图片_20230612133702.png 微信图片_20230612133652.png 微信图片_20230612131732.png

]]>http://forum.veye.cc/post/2690http://forum.veye.cc/post/2690Mon, 12 Jun 2023 08:11:57 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 05:32:44 GMT]]>@刚子 没明白你的意思，你的相机和fpdlink tx板子不是一起买的，是你自己组装的吗？如果你的相机排线接口的，可以跟fpdlink的tx板子用排线接起来。

]]>http://forum.veye.cc/post/2689http://forum.veye.cc/post/2689Mon, 12 Jun 2023 05:32:44 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 05:24:08 GMT]]>你好，我们买的是免插排线的板子，现在不插排线图像出不来，怎么处理呢用的是这种方式就接入的：
https://wiki.veye.cc/index.php/CS-MIPI-X_for_Raspberry_Pi/zh#.E7.A1.AC.E4.BB.B6.E5.87.86.E5.A4.87.E5.8F.8A.E5.AE.89.E8.A3.85
微信图片_20230612132110.png

]]>http://forum.veye.cc/post/2688http://forum.veye.cc/post/2688Mon, 12 Jun 2023 05:24:08 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Mon, 12 Jun 2023 01:08:24 GMT]]>@刚子 https://wiki.veye.cc/index.php/Build_drivers_from_source_for_rpi/zh
请按照这个步骤编译一下即可。

]]>http://forum.veye.cc/post/2686http://forum.veye.cc/post/2686Mon, 12 Jun 2023 01:08:24 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Sat, 10 Jun 2023 02:14:00 GMT]]>@刚子 当前只有在6.1.21-v7l+ 中有ds90ub954 文件，别的版本都没有，当前我们系统已经安装成6.1.21-v8+了，请帮忙生成该版本的文件

]]>http://forum.veye.cc/post/2685http://forum.veye.cc/post/2685Sat, 10 Jun 2023 02:14:00 GMT<![CDATA[Reply to CS-FPD-CAM-IMX327摄像头树莓派驱动模式连接不成功 on Fri, 09 Jun 2023 07:29:52 GMT]]>@veye_xumm 那我下载最新版本了

Raspberry Pi OS with desktop

Release date: May 3rd 2023
System: 32-bit
Kernel version: 6.1
Debian version: 11 (bullseye)
Size: 872MB

Show SHA256 file integrity hash:

]]>http://forum.veye.cc/post/2683http://forum.veye.cc/post/2683Fri, 09 Jun 2023 07:29:52 GMT