<![CDATA[How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode)]]>I want to change Operating mode (CSI-2 mode -> raw mode)
How can I do this?
I know the input mode of operation is controlled by the FPD3_MODE(Register 0x6D[1:0])
How can I set the value of this MODE?
please let me know the process..

I'm using CS-FPD-XAVIER-nCAM Series DevKit and TI DS90UB913A-Q1 Camera.

]]>http://forum.veye.cc/topic/48/how-to-change-fpd-link-3-operating-mode-csi-2-mode-raw-modeRSS for NodeTue, 08 Sep 2026 15:01:09 GMTTue, 20 Apr 2021 04:19:50 GMT60<![CDATA[Reply to How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode) on Wed, 21 Apr 2021 03:37:46 GMT]]>@yongjin
I don't know what your current state of knowledge is. If you don't understand i2C, you don't understand fpdlink, you don't understand registers. I think you should first learn the basics and be able to understand the information and code we provide now, and then proceed to your next work.
Good luck.

]]>http://forum.veye.cc/post/318http://forum.veye.cc/post/318Wed, 21 Apr 2021 03:37:46 GMT<![CDATA[Reply to How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode) on Wed, 21 Apr 2021 03:26:49 GMT]]>@veye_xumm
Hi Xumm.Unfortunately, I can't understand your meaning.
Please let me know more detail procedure.

one more If adjusting by I2C, it needs another special tool??

Please understand I'm beginner on this technique

]]>http://forum.veye.cc/post/317http://forum.veye.cc/post/317Wed, 21 Apr 2021 03:26:49 GMT<![CDATA[Reply to How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode) on Tue, 20 Apr 2021 07:32:22 GMT]]>@yongjin via i2c

]]>http://forum.veye.cc/post/308http://forum.veye.cc/post/308Tue, 20 Apr 2021 07:32:22 GMT<![CDATA[Reply to How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode) on Tue, 20 Apr 2021 07:10:14 GMT]]>@veye_xumm Can you explain how to adjust registers? I have no experience about that.

]]>http://forum.veye.cc/post/307http://forum.veye.cc/post/307Tue, 20 Apr 2021 07:10:14 GMT<![CDATA[Reply to How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode) on Tue, 20 Apr 2021 07:01:30 GMT]]>@yongjin Because we do not do raw camera module, so we really do not have this kind of debugging experience. It should be just to adjust some registers.

]]>http://forum.veye.cc/post/306http://forum.veye.cc/post/306Tue, 20 Apr 2021 07:01:30 GMT<![CDATA[Reply to How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode) on Tue, 20 Apr 2021 06:06:34 GMT]]>@veye_xumm I have cam(TI DS90UB913A-Q1 serializer) which can be operated raw mode and I want adapt them to Jetson xavier via FPD-LINK3-2RX. Can you explain how to do it?

]]>http://forum.veye.cc/post/305http://forum.veye.cc/post/305Tue, 20 Apr 2021 06:06:34 GMT<![CDATA[Reply to How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode) on Tue, 20 Apr 2021 05:48:10 GMT]]>@yongjin
Since our camera module do not support raw output mode, I think it is meaningless to change the fpdlink mode to raw.

]]>http://forum.veye.cc/post/304http://forum.veye.cc/post/304Tue, 20 Apr 2021 05:48:10 GMT