<![CDATA[software trigger for MV-MIPI-SC130M]]>Hi,
How to make a long exposure on the MV-MIPI-SC130M camera? Is it possible to change the program code?
Requires a software trigger to control exposure time up to 1 minute.
Can any body help me?

]]>http://forum.veye.cc/topic/558/software-trigger-for-mv-mipi-sc130mRSS for NodeFri, 04 Sep 2026 20:37:22 GMTSun, 18 Feb 2024 16:24:21 GMT60<![CDATA[Reply to software trigger for MV-MIPI-SC130M on Thu, 22 Feb 2024 05:08:50 GMT]]>@dm

@dm said in software trigger for MV-MIPI-SC130M:

Are the trigger pins of the sensor not connected to the device controller?

The trigger pins of the sensor are connected to the device controller

]]>http://forum.veye.cc/post/3819http://forum.veye.cc/post/3819Thu, 22 Feb 2024 05:08:50 GMT<![CDATA[Reply to software trigger for MV-MIPI-SC130M on Wed, 21 Feb 2024 13:01:23 GMT]]>@veye_xumm
Thank you.
Are the trigger pins of the sensor not connected to the device controller?

]]>http://forum.veye.cc/post/3818http://forum.veye.cc/post/3818Wed, 21 Feb 2024 13:01:23 GMT<![CDATA[Reply to software trigger for MV-MIPI-SC130M on Tue, 20 Feb 2024 08:55:31 GMT]]>@dm
With today's camera firmware, the exposure time is limited by the minimum frame rate. To achieve long exposures, you first have to configure a very small frame rate, here are our measurements.
506592fb-e978-4665-8319-0ce2fd682e7b-image.png

]]>http://forum.veye.cc/post/3805http://forum.veye.cc/post/3805Tue, 20 Feb 2024 08:55:31 GMT