<![CDATA[Horizontal Line Artifacts on MV-MIPI-IMX264 and IMX287 with NVIDIA Jetson Orin NX (JetPack 6)]]>I'm using the MV-MIPI-IMX264 and MV-MIPI-IMX287 sensors with the NVIDIA Jetson Orin NX, running JetPack 6 (R36.3), and I've noticed horizontal line artifacts in my images. This issue is especially noticeable with the IMX287 sensor and when I set a smaller Region Of Interest (ROI) on the IMX264 sensor.
Have any similar experience on this?
thanks

Screenshot from 2024-11-07 17-57-52.png
Screenshot from 2024-11-07 17-58-05.png

]]>http://forum.veye.cc/topic/650/horizontal-line-artifacts-on-mv-mipi-imx264-and-imx287-with-nvidia-jetson-orin-nx-jetpack-6RSS for NodeSun, 13 Sep 2026 20:03:10 GMTThu, 07 Nov 2024 14:45:35 GMT60<![CDATA[Reply to Horizontal Line Artifacts on MV-MIPI-IMX264 and IMX287 with NVIDIA Jetson Orin NX (JetPack 6) on Wed, 11 Dec 2024 01:02:50 GMT]]>@mv

For third-party carrier boards on the Orin Nano or Orin NX platform, we have indeed encountered issues with MIPI signal transmission quality. There isn't a good solution at the moment, so we recommend switching to an official NVIDIA board.

]]>http://forum.veye.cc/post/4711http://forum.veye.cc/post/4711Wed, 11 Dec 2024 01:02:50 GMT<![CDATA[Reply to Horizontal Line Artifacts on MV-MIPI-IMX264 and IMX287 with NVIDIA Jetson Orin NX (JetPack 6) on Tue, 10 Dec 2024 05:32:01 GMT]]>@veye_xumm I use MV-MIPI-IMX265 But unfortunately, I don't have the official nvidia boards and I will be happy if you guide me on this board

]]>http://forum.veye.cc/post/4710http://forum.veye.cc/post/4710Tue, 10 Dec 2024 05:32:01 GMT<![CDATA[Reply to Horizontal Line Artifacts on MV-MIPI-IMX264 and IMX287 with NVIDIA Jetson Orin NX (JetPack 6) on Tue, 10 Dec 2024 01:10:31 GMT]]>@mv
May I ask what model of module you are using? Also, please repeat the test on an official nvidia board.

]]>http://forum.veye.cc/post/4707http://forum.veye.cc/post/4707Tue, 10 Dec 2024 01:10:31 GMT<![CDATA[Reply to Horizontal Line Artifacts on MV-MIPI-IMX264 and IMX287 with NVIDIA Jetson Orin NX (JetPack 6) on Mon, 09 Dec 2024 13:15:16 GMT]]>@veye_xumm
hello , I have exactly the same problem and this problem occurs when the object in the image starts to move or the camera itself moves, below is my camera version , i use jetson orin nx with carrier SeeedStudio A608
--> version is C 01.34 and L 02.02

]]>http://forum.veye.cc/post/4704http://forum.veye.cc/post/4704Mon, 09 Dec 2024 13:15:16 GMT<![CDATA[Reply to Horizontal Line Artifacts on MV-MIPI-IMX264 and IMX287 with NVIDIA Jetson Orin NX (JetPack 6) on Wed, 20 Nov 2024 06:44:57 GMT]]>@veye_xumm
I think my connections are not as good as it should be.
I'll try in better condition if the problem persist, I'll make a new issue.
Thanks

]]>http://forum.veye.cc/post/4626http://forum.veye.cc/post/4626Wed, 20 Nov 2024 06:44:57 GMT<![CDATA[Reply to Horizontal Line Artifacts on MV-MIPI-IMX264 and IMX287 with NVIDIA Jetson Orin NX (JetPack 6) on Fri, 08 Nov 2024 01:37:32 GMT]]>@otca
I feel there might be an issue with the image. Could you please help confirm a few points?

  1. The version of the two cameras—please read it using mv_mipi_i2c.sh and send it to me.
  2. How can this issue be reproduced? Is it intermittent or consistent? How can we replicate it?
]]>http://forum.veye.cc/post/4569http://forum.veye.cc/post/4569Fri, 08 Nov 2024 01:37:32 GMT