Different resolution & framerates for veye-mipi-imx462?
-
Hello, I was wondering if there was the possibility of configuring the veye-mipi-imx462 ISP to capture in lower resolutions at higher framerate. I know that the imx462 image sensor itself is capable of this, and on some of your products e.g. the cs-mipi-sc132, the ISP can have different resolutions and framerates are able to be set via i2c with videofmt command.
Is this at all possible with the veye-mipi-imx462?
-
@matt_p Sorry for the late reply. Limited by the program, 462 could not make it.
-
thanks @veye_xumm , no issue.
-
Sony's data brief for the IMX462 says the sensor is capable of 1280 (H) × 720 (V) as well as 1920 (H) × 1080 (V). https://www.sony-semicon.com/files/62/flyer_security/IMX462LQR_LQR1_Flyer.pdf , but I agree, setting those parameters does not work in the VEYE software.
Do you happen to know where I can find a pdf of the data sheet for the sensor? I am guessing this should be a couple hundred pages, rather than the 2 page data brief. I can't find it on Sony's site.
Thank you.
-
@radiohound As far as I know, sony's datasheet is only open to corporate customers who have signed an NDA.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login