@veye_xumm said in MIPI-VEYE462 menu on screen display:
This means you have some interference and noise on the i2c bus. Suggest you check your design, are there multiple peripherals mounted on the i2c bus and is it possible that communication on the bus is going into an uncontrollable state?
For this camera right now, it is recommended to power down and the menu will go away when you re-power up the camera.
Thaks for reaply. I have IMX8MM board kernel kirkstone 5.15. Only one device is connected to the i2c bus(i2c3) it is VEYE462.
Log boot driver:
[ 2.181010] veyecam2m 2-003b: camera id is veyecam2m
[ 2.197853] veyecam2m 2-003b: sensor is IMX462
[ 2.202316] veyecam2m 2-003b: board type is ONE board
[ 2.213049] veyecam2m 2-003b: set to YUYV SEQ
Today, image became black /white. The menu and label "WAITING" appears /disappears randomly. What commands should I use to reset the camera to factory settings?
