@veye_xumm

FIXED! thank you!

I prefer to have a UDP working since it will be used after testing via 4G/LTE connection.

All these test are currently done via Wifi. Standard Pi camera is working fine.

@veye_xumm

I tried. Without succes. Any suggestions?

RPI side (192.168.0.163)

./veye_raspivid -b 4000000 -t 0 -o -  | gst-launch-1.0 -v fdsrc ! h264parse ! rtph264pay config-interval=1 pt=96 ! gdppay ! tcpserversink host=192.168.0.208 port=7000

PC side (192.168.0.208)

gst-launch-1.0 -v tcpclientsrc host=192.168.0.163 port=7000 ! gdpdepay ! rtph264depay ! avdec_h264 ! autovideosink sync=false

ERROR GSTREAMER

(gst-launch-1.0:5064): GStreamer-WARNING **: 21:15:29.964: Failed to load plugin 'C:\gstreamer\1.0\msvc_x86\lib\gstreamer-1.0\gstwavpack.dll': The specified module could not be found.
This usually means Windows was unable to find a DLL dependency of the plugin. Please check that PATH is correct.
You can run 'dumpbin -dependents' (provided by the Visual Studio developer prompt) to list the DLL deps of any DLL.
There are also some third-party GUIs to list and debug DLL dependencies recursively.
Use Windows high-resolution clock, precision: 1 ms
Setting pipeline to PAUSED ...
ERROR: from element /GstPipeline:pipeline0/GstTCPClientSrc:tcpclientsrc0: Could not open resource for reading.
Additional debug info:
../gst/tcp/gsttcpclientsrc.c(493): gst_tcp_client_src_start (): /GstPipeline:pipeline0/GstTCPClientSrc:tcpclientsrc0:
Failed to connect to host '192.168.0.163:7000': No connection could be made because the target machine actively refused it.
ERROR: pipeline doesn't want to preroll.
ERROR: from element /GstPipeline:pipeline0/GstTCPClientSrc:tcpclientsrc0: GStreamer error: state change failed and some element failed to post a proper error message with the reason for the failure.
Additional debug info:
../libs/gst/base/gstbasesrc.c(3557): gst_base_src_start (): /GstPipeline:pipeline0/GstTCPClientSrc:tcpclientsrc0:
Failed to start
ERROR: pipeline doesn't want to preroll.
Failed to set pipeline to PAUSED.
Setting pipeline to NULL ...
Freeing pipeline ...

ERROR RPI

14/06/2022 20:15:22 Enabling custom
mmal: Splitter has 4 output port,you could use num 2,3 for extend
Setting pipeline to PAUSED ...
mmal: Splitter has 4 output port,you could use num 2,3 for extend
Pipeline is PREROLLING ...
mmal: Splitter has 4 output port,you could use num 2,3 for extend
Setting pipeline to NULL ...
mmal: Splitter has 4 output port,you could use num 2,3 for extend
Setting pipeline to NULL ...
ERROR: from element /GstPipeline:pipeline0/GstTCPServerSink:tcpserversink0: Could not open resource for reading.
Additional debug info:
gsttcpserversink.c(403): gst_tcp_server_sink_init_send (): /GstPipeline:pipeline0/GstTCPServerSink:tcpserversink0:
Failed to bind on host '192.168.0.208:7000': Error binding to address: Cannot assign requested address
ERROR: pipeline doesn't want to preroll.
Freeing pipeline ...
ERROR: from element /GstPipeline:pipeline0/GstTCPServerSink:tcpserversink0: Could not open resource for reading.
Additional debug info:
gsttcpserversink.c(403): gst_tcp_server_sink_init_send (): /GstPipeline:pipeline0/GstTCPServerSink:tcpserversink0:
Failed to bind on host '192.168.0.208:7000': Error binding to address: Cannot assign requested address
ERROR: pipeline doesn't want to preroll.
Freeing pipeline ...
mmal: mmal_vc_port_enable: failed to enable port vc.ril.isp:in:0(UYVY): ENOMEM
mmal: mmal_port_enable: failed to enable connected port (vc.ril.isp:in:0(UYVY))0x1bfef00 (ENOMEM)
mmal: mmal_connection_enable: output port couldn't be enabled
mmal: Failed to create rawcam->isp connection
mmal: Out of memory
mmal: Camera is not detected. Please check carefully the camera module is installed correctly

Hi,

I trying to get gstreamer working via UDP

RPI side

/home/pi/raspberrypi/veye_raspcam/bin/./veye_raspivid -b 4000000 -t 0 -o -  | gst-launch-1.0 -v fdsrc ! h264parse ! rtph264pay config-interval=1 pt=96 ! gdppay ! udpsink host=192.168.0.208 port=7000 sync=false

PC side (192.168.0.208:7000)

gst-launch-1.0 -v udpsrc port=7000 ! gdpdepay ! rtph264depay ! avdec_h264 ! autovideosink sync=false

I get the following error

Any help is really appreciated!