Jetson nano 上 CS-MIPI-IMX307管道设置失败问题
-
完成系统安装后，在jetson版端检测是否正确连接摄像头时弹出如下报警：
board setup faied 等。并且在开机界面就已经显示有此类信息了，不知如何解决!
-
@tlx 看提示，你应该使用错了dtb文件。
这部分是fpdlink模组才有的。 你是否使用了fpdlink的dtb呢？
不要用fpdlink的。 -
@veye_xumm 您好，我更改了dtb文件后，没有出现您框框里的提示了，但还是没有办法解决问题，还是同样的报错
-
@tlx
请检查一下排线方向，接插是否歪斜。 另外，部分早一些批次的mipi 307模组需要用5V供电，请看这里：
http://wiki.veye.cc/index.php/Power_supply_mode_switching/zh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login