Imx385无法识别i2c
-
I2c无法识别，不确定sensor单板供电是否正常
-
@dufuwei 量一下
-
@veye_xumm 没有提供完整的原理图，关于供电只说了可以接3v3或者5v0。另外，我需要配置软件吗，我们自己之前做过一款385，在我们的单板上是能出图的，就用以前的软件可以吗？
-
@dufuwei 我们这个385不是裸sensor板，是带isp模块的。所以跟你之前的板子用法是不一样的。
具体你可以看看wiki.veye.cc上相关的资料。 -
@veye_xumm 那应该也不会影响i2c的识别吧？
-
@dufuwei 不是的。我们这个模组，IMX385的I2C address在外面是无法访问的。
-
@veye_xumm 您这边能帮忙提供一下这个模组的完整原理图吗，可能isp方面有冲突
-
@dufuwei 不好意思，我们这个无法绕过ISP模块。也不能提供完整的原理图。
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login