Setting YUV-sequence CSSC132
-
Hello,
is it possible to change the YUV-sequence of the CSSC132?
Using the given command ./veye_mipi_i2c.sh -w -f yuvseq I get the correct value "YUYV" reading it out in the command line, but the output is still in "UYVY" sequence.
Why isn't it a cs_mipi_i2c.sh command?Thanks
-
@lubertroft
hi,
http://wiki.veye.cc/index.php/CS-MIPI-SC132_version_log
yuyv is supported in this version .Because it is CS series, of course cs_mipi_i2c.sh is the corresponding script.
http://wiki.veye.cc/index.php/VEYE-MIPI-290/327_i2c/#yuvseq -
Thank you, that solved the problem.
It would be helpful if you could update that in point 3.45 on the site: http://wiki.veye.cc/index.php/CS-MIPI-X_i2c
Regards
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login