@veye_xumm does the frequency change depending on the selected format? 1080p and 30 fps, 720p and 60 fps, or 640x480 and 130 fps

Hi. The datasheet states that CS-MIPI-IMX307 outputs a format of 1920*1080, 1 pixel = RAW-10 or RAW-12 bits. bitrate for full-HD 1080p and 60 fps is 891Mbps/line (CSI-2).
Your module with this sensor outputs YUV422-8bit. 1 pixel = 16 bit. what output frequency does the pin for mipi_clk have?

@veye_xumm

1. what data should i enter by index -f ? can you provide a list and description of this data?
2. i2c protocol is <0x3b - 1 byte> <-f powerhz - ?byte> <-p1 60 - 1 byte>
   ( -f powerhz - ?byte ) - According to the script you provided, I can't see the values that I have to pass in this field.

Hi. there is a CS-MIPI-IMX307 camera module.
I want to send commands to the camera from the fpga board. my fpga board is not a Raspberry pi. my fpga board does not have an operating system. i2c address of your module is 0x3B. can you provide a description of the i2c protocol for CS-MIPI-IMX307 camera module?

I'm interested in the list of commands and the description of the package that I have to send via the i2с bus.