@veye_xumm said in Veye IMX 462 RK3566 ORANGE PI 3B:
@esjeeybi
Pls refer to this code which is kernel 5.10
https://github.com/veyeimaging/rk35xx_firefly/tree/main/linux/drivers/rk358x/cam_drv_src
Only this is for RK358x and I have RK3566. Please make drivers for RK56x for kernel 5.10. There is no other system for orange pi 3b than linux kernel 5.10. If there was a 4.19 system, I wouldn't bother.
@veye_xumm Hello, Orange pi releases systems for orange pi 3b with kernel 5.10 and this is what I have. This is a popular board, so it would be nice if you made a driver for the 5.10 kernel.
Hello, I have been struggling for quite a long time to install the imx462 camera on Ubuntu kernel 5.10 (this system is provided by the manufacturer) on the website:
https://github.com/veyeimaging/rk35xx_firefly
There is an example for kernel 4.19, unfortunately for orange pi 3b there is no ubuntu kernel 4.19. Is there any good person who could help me? It's a waste of the camera I bought.
astroberry@astroberry:~ $ uname -a
Linux astroberry 5.10.60-v7l+ #1449 SMP Wed Aug 25 15:00:44 BST 2021 armv7l GNU/Linux
9.2.2 There are two ways to get the source code of the version you want:
using git to clone the corresponding branch and checkout the corresponding tag.
git clone --branch rpi-5.4.y https://github.com/raspberrypi/linux
I did this step 9.2.2 up to this point, I hope I entered the numbers correctly in the code
--branch rpi-5.4.y
And from that moment on, below, I have a problem, as I entered, an error popped up, do you need other numbers?
git checkout raspberrypi-kernel_1.20201022-1
Will you write the rest of the code as you compile by yourself so that I can understand? I have a raspberry pi 4 and a camera sc132 module. It would be nice if you added 5.10.60-v7l + builds to gitgub.
And in my spare time I will learn to compile as you write step by step.
Have a nice day
Hey I have a problem again I have updated raspbian and I need the following files.
usage: sudo ./install_driver.sh veyecam2m/veye327/csimx307/cssc132
Enable i2c0 adapter...
Add dtoverlay=cssc132 to /boot/config.txt
Add gpu=400M to /boot/config.txt
Add cma=128M to /boot/cmdline.txt
Installing the cssc132.ko driver
install: cannot stat './driver_bin/5.10.60-v7l+/cssc132.ko': No such file or directory
install: cannot stat './driver_bin/5.10.60-v7l+/cssc132.dtbo': No such file or directory
I bought this webcam because it has good UV sensitivity. And he wants to photograph the sun through a UV transmitting filter. If I have to compile each time after the update, you have to show me how to do it, I will be very thankful and I will not bother you.
I also have a second problem, as the webcam worked for me before, the webcam in the oacapture program detects the image but does not work contrast, brightness, etc.
https://www.openastroproject.org/oacapture/
I care about this program because I want to record videos in the .SER format
Unless you have another idea that you can set the FPS, Gain, Brightness, Contrast and record in .SER format?
regards
@veye_xumm After installing the drivers, unfortunately I cannot start the preview 
pi@raspberrypi:~ $ dmesg | grep 132
[ 1.411321] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ 7.138793] cssc132 10-003b: supply VANA not found, using dummy regulator
[ 7.139100] cssc132 10-003b: supply VDIG not found, using dummy regulator
[ 7.139228] cssc132 10-003b: supply VDDL not found, using dummy regulator
[ 7.149421] cssc132 10-003b: read sensor id 0132
[ 7.149442] cssc132 10-003b: camera id is cs-mipi-sc132
[ 7.150884] cssc132 10-003b: camera cssc132_mipi is found
pi@raspberrypi:~ $ ls /dev/video0
/dev/video0
pi@raspberrypi:~ $ v4l2-ctl --list-formats-ext
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture
[0]: 'UYVY' (UYVY 4:2:2)
Size: Discrete 1280x1080
Size: Discrete 1080x1280
Size: Discrete 1280x720
Size: Discrete 720x1280
Size: Discrete 640x480
Size: Discrete 480x640
pi@raspberrypi:~ $ export DISPLAY=:0
pi@raspberrypi:~ $ gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1280, height=(int)1080,framerate=(fraction)45/1" ! videoconvert ! autovideosink sync=false -v
bash: gst-launch-1.0: command not found
@veye_xumm
Hi, I have updated and still no file. Unfortunately, I can't compile.
install: cannot stat './driver_bin/5.10.52-v7l+/cssc132.ko': No such file or directory
install: cannot stat './driver_bin/5.10.52-v7l+/cssc132.dtbo': No such file or directory
Hello, I have a problem installing the driver V4L2 for the SC132. Where do i get the missing files?
astroberry@astroberry:~ $ git clone https://github.com/veyeimaging/raspberrypi_v4l2.git
Cloning into 'raspberrypi_v4l2'...
remote: Enumerating objects: 209, done.
remote: Counting objects: 100% (113/113), done.
remote: Compressing objects: 100% (57/57), done.
remote: Total 209 (delta 61), reused 101 (delta 53), pack-reused 96
Receiving objects: 100% (209/209), 165.79 KiB | 2.96 MiB/s, done.
Resolving deltas: 100% (96/96), done.
astroberry@astroberry:~ $ cd raspberrypi_v4l2/release/
astroberry@astroberry:~/raspberrypi_v4l2/release $ chmod +x *
astroberry@astroberry:~/raspberrypi_v4l2/release $ sudo ./install_driver.sh cssc132
[sudo] password for astroberry:
usage: sudo ./install_driver.sh veye327/csimx307/cssc132
Enable i2c0 adapter...
Add dtoverlay=cssc132 to /boot/config.txt
Add gpu=400M to /boot/config.txt
Add cma=128M to /boot/cmdline.txt
Installing the cssc132.ko driver
install: cannot stat './driver_bin/5.4.51-v7l+/cssc132.ko': No such file or directory
install: cannot stat './driver_bin/5.4.51-v7l+/cssc132.dtbo': No such file or directory