IMX462无法工作在jetson nano上
-
1、我在jetpack 3.1上测试了，没有更换image和dtb文件前，树莓派IMX219可以工作，更换后IMX462无法工作，同时IMX219也无法工作。
2、我在jetpack 4.6测试了，现象一样，更换前树莓派IMX219可以工作，更换后我们的IMX 462和imx219都无法工作。
3、demsg见下图，谢谢。
-
- 关于更换之后219不能正常工作。
是的。因为我们的dts直接指定了我们对应的型号作为固定的外设。要支持原生imx219,只需要把官方自带的dtb替换回去就可以了。 - 关于imx462的问题。
VEYE-MIPI-IMX462需要采用VEYE-MIPI-CAM2M dtb。
- 关于更换之后219不能正常工作。
-
@veye_xumm 谢谢您，问题完美解决，IMX462可以完全正常工作了。
-
@freshman 不客气。
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login