多路sc132未识别
-
@chenmin 硬件的连接拍几张细节图发出来看一下，主要是ffc排线方向。
-
感谢！
-
@chenmin 这头没问题，另外那一头呢
-
@veye_xumm
您好，另外一头如下
-
@chenmin
第一个，永远不要带电插拔。
第二个，我不是想看这个啊~~~
这个地方，28pin的引脚的那个ffc排线，银色接触面要向外，蓝色保护层向里。 -
-
@veye_xumm 请问dmesg提醒的信息是认为ffc没有接好吗？
-
@chenmin 看起来你的系统是烧写的没有问题的。
但是dmesg提示30-35这六个i2c bus上都找不到0x3b为地址的设备。所以我怀疑到硬件上。
不过从你的表述看，硬件连接也是ok的。
有点奇怪。 -
您好，请问12V-5A的电源供电够吗?我现在担心是不是供电不足？将系统刷成4.5.1也依然报-121的错误。 @veye_xumm
-
@chenmin 应该可以的。 你如果有万用表可以量一下摄像头的ffc接口供电
-
@veye_xumm 要不你把整套板子寄过来我们来检查一下吧
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login