VEYE IMAGING Forum
    • Categories
    • Tags
    • Recent
    • Popular
    • Users
    • WIKI
    • veye.cc
    • Register
    • Login

    在向自己的Image中添加驱动的过程中遇到了error during i2c read probe (-121)

    Scheduled Pinned Locked Moved FPD LINK III Camera
    14 Posts 2 Posters 4.1k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R Offline
      robot @veye_xumm
      last edited by

      @veye_xumm said in 在向自己的Image中添加驱动的过程中遇到了error during i2c read probe (-121):

      这种情况，按理说应该正常识别到摄像头了啊。你确认实际摄像头型号跟dtb中的型号一致吗？

      mr123@mr123-emmc3:~$
      mr123@mr123-emmc3:~$ dmesg |grep cssc
      [ 7.762902] cssc132 7-003b: probing v4l2 sensor
      [ 7.763294] cssc132 7-003b: tegracam sensor driver:cssc132_v2.0.6
      [ 7.764842] cssc132 7-003b: read sensor id 0132
      [ 7.769477] cssc132 7-003b: camera id is cs-mipi-sc132
      [ 7.774748] cssc132 7-003b: Detected CS_MIPI_SC132 camera
      [ 7.774797] cssc132 8-003b: probing v4l2 sensor
      [ 7.775142] cssc132 8-003b: tegracam sensor driver:cssc132_v2.0.6
      [ 7.775348] cssc132 8-003b: cs_sc132_board_setup: error during i2c read probe (-121)
      [ 7.783103] cssc132 8-003b: board setup failed
      [ 7.787616] cssc132: probe of 8-003b failed with error -121
      [ 7.940285] vi 54080000.vi: subdev cssc132 7-003b bound
      mr123@mr123-emmc3:~$
      是的，这个是我使用预编译的Image的dmesg，dtb都是同一个

      veye_xummV 1 Reply Last reply Reply Quote 0
      • veye_xummV Offline
        veye_xumm @robot
        last edited by

        @robot
        这个dmesg看，已经成功了，一切正常。

        Questions will be answered as soon as possible, please be patient.
        如果你使用中文，请直接用中文提问。
        May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

        R 1 Reply Last reply Reply Quote 0
        • R Offline
          robot @veye_xumm
          last edited by

          @veye_xumm
          是的，但是这个Image是从github上下载的，我自己的一直都不行：
          mr123@mr123-emmc3:~$ dmesg |grep cssc
          [ 1.711145] cssc132 7-003b: probing v4l2 sensor
          [ 1.711521] cssc132 7-003b: tegracam sensor driver:cssc132_v2.0.6
          [ 1.712203] cssc132 7-003b: cs_sc132_board_setup: error during i2c read probe (-121)
          [ 1.712206] cssc132 7-003b: board setup failed
          [ 1.712267] cssc132: probe of 7-003b failed with error -121
          [ 1.712310] cssc132 8-003b: probing v4l2 sensor
          [ 1.712663] cssc132 8-003b: tegracam sensor driver:cssc132_v2.0.6
          [ 1.712861] cssc132 8-003b: cs_sc132_board_setup: error during i2c read probe (-121)
          [ 1.712864] cssc132 8-003b: board setup failed
          [ 1.712914] cssc132: probe of 8-003b failed with error -121

          mr123@mr123-emmc3:~$ i2cdetect -y -r 7
          0 1 2 3 4 5 6 7 8 9 a b c d e f
          00: -- -- -- -- -- -- -- -- -- -- -- -- --
          10: -- -- -- -- -- -- -- -- -- 19 -- -- -- -- -- --
          20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
          30: UU -- -- -- -- -- -- -- -- -- -- 3b -- -- -- --
          40: UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
          50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
          60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
          70: -- -- -- -- -- -- -- --

          所以就现在来说我比较怀疑cssc132驱动的问题。
          或者说还有其他原因会导致这个现象吗？
          在此过程中我只改变的Image。

          veye_xummV 1 Reply Last reply Reply Quote 0
          • veye_xummV Offline
            veye_xumm @robot
            last edited by

            @robot
            看一下你的dmes全部内容，954这颗芯片的初始化，难不成跑到了132模组初始化后面去了？
            或者你吧整个dmesg的输出保存成文件，post上来我看看。

            Questions will be answered as soon as possible, please be patient.
            如果你使用中文，请直接用中文提问。
            May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

            R 1 Reply Last reply Reply Quote 0
            • R Offline
              robot @veye_xumm
              last edited by

              @veye_xumm said in 在向自己的Image中添加驱动的过程中遇到了error during i2c read probe (-121):

              954这颗芯片的初始化，难不成跑到了132模组初始化后面去了？
              或者你吧整个dmesg的输出保存成文件，post上来我看看。

              您好，
              是这样的，确实是先初始化的cssc132然后再初始化的ds90ub954:
              [ 1.910350] i2c /dev entries driver
              [ 1.912132] i2c i2c-6: Added multiplexed i2c bus 7
              [ 1.912675] i2c i2c-6: Added multiplexed i2c bus 8
              [ 1.912681] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter
              [ 1.913916] cssc132 7-003b: probing v4l2 sensor
              [ 1.914301] cssc132 7-003b: tegracam sensor driver:cssc132_v2.0.6
              [ 1.914460] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x3b
              [ 1.914533] cssc132 7-003b: cs_sc132_board_setup: error during i2c read probe (-121)
              [ 1.922319] cssc132 7-003b: board setup failed
              [ 1.926835] cssc132: probe of 7-003b failed with error -121
              [ 1.926881] cssc132 8-003b: probing v4l2 sensor
              [ 1.927229] cssc132 8-003b: tegracam sensor driver:cssc132_v2.0.6
              [ 1.927366] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x3b
              [ 1.927439] cssc132 8-003b: cs_sc132_board_setup: error during i2c read probe (-121)
              [ 1.935199] cssc132 8-003b: board setup failed
              [ 1.939703] cssc132: probe of 8-003b failed with error -121
              [ 1.939793] i2c-ds90ub954 7-0030: ds90ub954_probe: start
              [ 1.939798] i2c-ds90ub954 7-0030: ds90ub954_parse_dt: deserializer:
              [ 1.939804] i2c-ds90ub954 7-0030: pass-gpio not found, ignoring
              [ 1.939808] i2c-ds90ub954 7-0030: lock-gpio not found, ignoring
              [ 1.939813] i2c-ds90ub954 7-0030: pdb-gpio not found, ignoring
              [ 1.939818] i2c-ds90ub954 7-0030: ds90ub954_parse_dt: - csi-lane-count 2
              [ 1.939824] i2c-ds90ub954 7-0030: ds90ub954_parse_dt: - csi-lane-speed 800
              [ 1.939828] i2c-ds90ub954 7-0030: ds90ub954_parse_dt: - test-pattern disabled
              [ 1.939833] i2c-ds90ub954 7-0030: ds90ub954_parse_dt: - discontinuous clock used
              [ 1.939860] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: parsing serializers device tree:
              [ 1.939867] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - serializer rx-channel: 0
              [ 1.939872] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: -test-pattern disabled
              [ 1.939877] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - csi-lane-count 2
              [ 1.939882] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found
              [ 1.939886] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0
              [ 1.939891] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found
              [ 1.939895] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0
              [ 1.939900] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found
              [ 1.939904] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0
              [ 1.939908] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found
              [ 1.939912] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0
              [ 1.939916] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - gpio0-control property not found
              [ 1.939920] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000
              [ 1.939924] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - gpio1-control property not found
              [ 1.939928] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000
              [ 1.939932] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - gpio2-control property not found
              [ 1.939936] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000
              [ 1.939940] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - gpio3-control property not found
              [ 1.939943] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000
              [ 1.939947] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - hs-clk-div property not found
              [ 1.939951] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4)
              [ 1.939955] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - div-m-val property not found
              [ 1.939959] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1
              [ 1.939963] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - div-n-val property not found
              [ 1.939967] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28
              [ 1.939972] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - i2c-address: 0x19
              [ 1.940064] i2c-ds90ub954 7-0030: ds90ub953_i2c_client init client done
              [ 1.940096] i2c-ds90ub954 7-0030: ds90ub953_regmap_init init regmap done
              [ 1.940216] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - num of slave alias pairs: 1
              [ 1.940221] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - slave addr: 0x3B, alias addr: 0x3B
              [ 1.940225] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - discontinuous clock used
              [ 1.940230] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - i2c-pass-through-all disabled
              [ 1.940234] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - virtual-channel-map property not found
              [ 1.940238] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: - virtual-channel-map set to default val: 0xE4
              [ 1.940242] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: serializer 0 successfully parsed
              [ 1.940247] i2c-ds90ub954 7-0030: ds90ub953_parse_dt: done
              [ 1.954771] i2c-ds90ub954 7-0030: ds90ub954_init starting
              [ 1.956670] i2c-ds90ub954 7-0030: ds90ub954_init: device ID: 0x60, code:_UB954, revision: 0x20

              veye_xummV 1 Reply Last reply Reply Quote 0
              • veye_xummV Offline
                veye_xumm @robot
                last edited by

                @robot said in 在向自己的Image中添加驱动的过程中遇到了error during i2c read probe (-121):

                您好，
                是这样的，确实是先初始化的cssc132然后再初始化的ds90ub954:

                你看一下你合并我们的代码部分，注意makefile和kconfig中954和132两个驱动的先后顺序。 这个影响调用顺序。

                Questions will be answered as soon as possible, please be patient.
                如果你使用中文，请直接用中文提问。
                May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                R 1 Reply Last reply Reply Quote 0
                • R Offline
                  robot @veye_xumm
                  last edited by

                  @veye_xumm said in 在向自己的Image中添加驱动的过程中遇到了error during i2c read probe (-121):

                  注意makefile和kconfig中954和132两个驱动的先后顺序。 这个影响调用顺序。

                  好的，谢谢您了。
                  另外我今天新到四个cssc132相机，如果想要全部识别到的话，我是否需要对其进行硬件上的修改？

                  veye_xummV 1 Reply Last reply Reply Quote 0
                  • veye_xummV Offline
                    veye_xumm @robot
                    last edited by

                    @robot
                    不客气。 我不太清楚你买的订单的硬件信息。 可以看我们这页文章：
                    http://wiki.veye.cc/index.php/CS-FPD-XAVIER-nCAM_Series

                    Questions will be answered as soon as possible, please be patient.
                    如果你使用中文，请直接用中文提问。
                    May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                    R 1 Reply Last reply Reply Quote 0
                    • R Offline
                      robot @veye_xumm
                      last edited by

                      @veye_xumm
                      好的，谢谢您，Image的问题解决了。
                      关于四路相机的问题，我希望在新帖中向您提问。

                      veye_xummV 1 Reply Last reply Reply Quote 0
                      • veye_xummV Offline
                        veye_xumm @robot
                        last edited by

                        @robot ok

                        Questions will be answered as soon as possible, please be patient.
                        如果你使用中文，请直接用中文提问。
                        May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                        1 Reply Last reply Reply Quote 0

                        Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                        Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                        With your input, this post could be even better 💗

                        Register Login
                        • First post
                          Last post