cs_imx307_board_setup: invalid sensor model id
-
Hello everybody,
I am using the CS-MIPI-IMX-307 and installed the kernel image and the device tree on a Xavier NX according to step 3.5 from the wiki:
http://wiki.veye.cc/index.php/VEYE_CS_Camera_for_Jetson_TX2but when I checked the result from the command "dmesg | grep csx307" I get the following:
csx307 9-003b: probing v4l2 sensor
csx307 9-003b: tegracam sensor driver:csx307_v2.0.6
csx307 9-003b: read sensor id 0132
csx307 9-003b: cs_imx307_board_setup: invalid sensor model id: 306
csx307 9-003b: board setup failed
csx307 10-003b: probing v4l2 sensor
csx307 10-003b: tegracam sensor driver:csx307_v2.0.6
csx307 10-003b: read sensor id 0132
csx307 10-003b: cs_imx307_board_setup: invalid sensor model id: 306
csx307 10-003b: board setup failedwhy did it fail? What is the problem with the invalid sensor model id?
-
EDIT:
The problem was a wrong assumption of the camera that I am using. After adjusting the dtb-file of the correct camera the camera gets detected properly. -
@lubertroft You solved the problem by yourself. It was great!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login