树莓派CM4使用SC132时，无法使用i2c command
-
树莓派CM4，微雪CM4-BASE-IO-B底板，已经完成CAM0和CAM1的配置，能读取双摄像头数据。但是使用i2c进行配置时，出错，如下：
-
@cvuser
你好，我在官方的CMIO板子上是正常的。请帮忙执行以下下面的脚本发给我一下结果：rev=`cat /proc/cpuinfo | grep Revision | awk '{print substr($NF,length($NF)-5,6)}'` echo $rev
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login