SOLVED camera I2C configuaration for sync mode

g-towboat

Hi,
do i need special i2c configuaration for camera syncmode ? I have configured:

Master
./fpdlink3_i2c.sh -f sync_init -p 0 -p1 0 -b  30
./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 0 -b  30 -d 0x3b

Slaves
./fpdlink3_i2c_jetson.sh -f sync_init -p 1 -p1 1 -b 30
./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 30 -d 0x3c
./fpdlink3_i2c_jetson.sh -f sync_init -p 0 -p1 1 -b 31
./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 31 -d 0x3b
./fpdlink3_i2c_jetson.sh -f sync_init -p 1 -p1 1 -b 31
./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 31 -d 0x3c
./fpdlink3_i2c_jetson.sh -f sync_init -p 0 -p1 1 -b 32
./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 32 -d 0x3b
./fpdlink3_i2c_jetson.sh -f sync_init -p 1 -p1 1 -b 32
./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 32 -d 0x3c
./fpdlink3_i2c_jetson.sh -f sync_init -p 0 -p1 1 -b 33
./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 33 -d 0x3b
./fpdlink3_i2c_jetson.sh -f sync_init -p 1 -p1 1 -b 33
./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 33 -d 0x3c

Do i need more i2c configurations?
My problem is, camera 1 (/dev/video0) works fine but the slave (/dev/video1-7) have just blue image

regards

veye_xumm

@g-towboat
hi,
I think this might be the sync signal connection problem.
We can discuss it on the topic you post here :

http://forum.veye.cc/topic/18/camera-sync-mode/6