VEYE-MIPI-IMX385
-
Hello,
I just received a VEYE-MIPI-IMX385 module from your company. I got it from amazon here https://www.amazon.com/VEYE-MIPI-IMX385-Raspberry-Jetson-XavierNX-IMX385/dp/B09CNHLTJH/ref=sr_1_3?crid=1WOB69X1M8TDP&keywords=imx385&qid=1654709601&sprefix=imx385%2Caps%2C178&sr=8-3&th=1First questions:
On the Amazon description, it says "1/2.8 inch 2 Mega sensor IMX327" so is it IMX385 or IMX327?Second question:
After installing the driver, everything works, thank you. However when I did the FPS test using this gstreamer command:
gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! videoconvert ! fpsdisplaysink video-sink=fakesink -vI can only get on average 28.3 FPS. Never 30FPS.
I am using a Raspberry Pi 4 with 8 gig of RAM.
What can I do to get 30FPS?Thanks,
-
First questions:
On the Amazon description, it says "1/2.8 inch 2 Mega sensor IMX327" so is it IMX385 or IMX327?
It is IMX385, the information in that place was wrongly written, I will arrange to correct it.
gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! videoconvert ! fpsdisplaysink video-sink=fakesink -v
I can only get on average 28.3 FPS. Never 30FPS.
I am using a Raspberry Pi 4 with 8 gig of RAM.
What can I do to get 30FPS?
Since this pipeline uses pure software for data migration and data format conversion, the frame rate is very low.
We recommend you to use lagcy mode. Another way is to refer to libcamera-app and write a PREVIEW program. -
Hello,
Thanks for your reply. I am not sure how to write a preview based on libcamera-app without the libcamera support from your driver.
Thanks, -
@veye_xumm said in VEYE-MIPI-IMX385:
We recommend you to use lagcy mode. Another way is to refer to libcamera-app and write a PREVIEW program.
Is there support for legacy mode under bullseye 64 bit?
Thanks, -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login