VEYE IMAGING Forum
    • Categories
    • Tags
    • Recent
    • Popular
    • Users
    • WIKI
    • veye.cc
    • Register
    • Login

    ADP-N1-V2.0 Adapter Board

    Scheduled Pinned Locked Moved VEYE MIPI camera
    18 Posts 2 Posters 5.6k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • H Offline
      hchorsi @veye_xumm
      last edited by

      @veye_xumm Hello,

      I replaced BLM3401 on my ADP-N1-V2.0 Adapter Board and also made sure the board does't short. Please see attached images.

      Unfortunately, my adaptor board gets really really hot a few seconds after connecting to jetson!

      3.jpg 2.jpg 1.jpg

      veye_xummV 1 Reply Last reply Reply Quote 0
      • veye_xummV Offline
        veye_xumm @hchorsi
        last edited by

        @hchorsi Now in this case, we can't analyze the possible causes from the picture.

        Questions will be answered as soon as possible, please be patient.
        如果你使用中文，请直接用中文提问。
        May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

        H 1 Reply Last reply Reply Quote 0
        • H Offline
          hchorsi @veye_xumm
          last edited by

          @veye_xumm Any suggestions for me to debug the board? Thank you so much!

          veye_xummV 1 Reply Last reply Reply Quote 0
          • veye_xummV Offline
            veye_xumm @hchorsi
            last edited by

            @hchorsi Sorry, we don't have any good ideas right now. Maybe the last time the board was burned out, it caused damage to other parts of the board as well.

            Questions will be answered as soon as possible, please be patient.
            如果你使用中文，请直接用中文提问。
            May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

            H 1 Reply Last reply Reply Quote 0
            • H Offline
              hchorsi @veye_xumm
              last edited by

              @veye_xumm
              I use IMX335 along with ADP-N1-V2.0 adapter board on Jetson Orin. I want to make sure that I connect the adapter correctly and properly.

              • Should I connect the adapter board to a 12V external supply for imx335 (for a single camera)?

              • Can the adapter be connected the jetson without any camera or FFC cable attached to the adapter board?

              • Do I need at least one FFC cable connected to the adapter board before connecting to jetson?

              • When should I connect the adapter/camera to the jetson, before powering up the jetson or after powering up?

              veye_xummV 1 Reply Last reply Reply Quote 0
              • veye_xummV Offline
                veye_xumm @hchorsi
                last edited by

                @hchorsi

                @hchorsi said in ADP-N1-V2.0 Adapter Board:

                Should I connect the adapter board to a 12V external supply for imx335 (for a single camera)?

                No

                @hchorsi said in ADP-N1-V2.0 Adapter Board:

                Can the adapter be connected the jetson without any camera or FFC cable attached to the adapter board?

                Yes

                @hchorsi said in ADP-N1-V2.0 Adapter Board:

                Do I need at least one FFC cable connected to the adapter board before connecting to jetson?

                No

                @hchorsi said in ADP-N1-V2.0 Adapter Board:

                When should I connect the adapter/camera to the jetson, before powering up the jetson or after powering up?

                Of course, the operations of connecting and disconnecting the camera were performed when the Jetson board was powered off.

                Questions will be answered as soon as possible, please be patient.
                如果你使用中文，请直接用中文提问。
                May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                H 1 Reply Last reply Reply Quote 0
                • H Offline
                  hchorsi @veye_xumm
                  last edited by

                  @veye_xumm
                  I am interested in running IMX335 at 500fps. Is it possible to do this openCV or modifying "veye5_mipi_i2c.sh" file? Could you please let me know how?
                  Thank you

                  veye_xummV 1 Reply Last reply Reply Quote 0
                  • veye_xummV Offline
                    veye_xumm @hchorsi
                    last edited by

                    @hchorsi

                    1. The maximum frame rate supported by IMX335 is only 60fps.
                    2. The VEYE-MIPI-IMX335 module has ISP function, so the maximum frame rate is not only limited by the sensor's capability, but also limited by the ISP chip's capability.
                      The specific capabilities are stated in the datasheet:
                      5M (2592x1944P) @ 20fps, 5M (2592x1944P) @ 12.5fps, 4M (2560x1440P) @ 30fps, 4M (2560x1440P) @ 25fps.

                    Questions will be answered as soon as possible, please be patient.
                    如果你使用中文，请直接用中文提问。
                    May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                    H 1 Reply Last reply Reply Quote 0
                    • H Offline
                      hchorsi @veye_xumm
                      last edited by

                      @veye_xumm Thank you for your reply.
                      Would it be possible to disable ISP?
                      and then reduce the pixel numbers (say 2592(H)×250(V) pixels ) to run at higher frame rates?

                      veye_xummV 1 Reply Last reply Reply Quote 0
                      • veye_xummV Offline
                        veye_xumm @hchorsi
                        last edited by

                        @hchorsi I'm sorry, due to the limitation of the ISP solution, this camera does not support ROI function for arbitrary sizes.

                        Questions will be answered as soon as possible, please be patient.
                        如果你使用中文，请直接用中文提问。
                        May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                        1 Reply Last reply Reply Quote 0

                        Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                        Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                        With your input, this post could be even better 💗

                        Register Login
                        • First post
                          Last post