I2c tools failed

[Viktor]

Ok. Have tried mshutter, but shadows presents in all cases.

If i write mshutter 0x46( 1/1000 ) i expect very short exposure and more dark image. It is ok because we are using light at night.

But at daylight frame is over exposured. So works only 0x40 (auto shutter). Then at night we have this effect: http://forum.veye.cc/post/185

Here is only mshutter auto:

[veye_xumm]

@viktor said in I2c tools failed:

Have tried mshutter, but shadows presents in all cases.

Pls try close wdr as I suggested before.

[Viktor]

Wdr already closed.
May be i should restart system?

Pal i set before run programm.
But other controls can i set before too?

[veye_xumm]

@viktor

1. pls post your cmd to close wdr.
2. pls try close 3d denoise.

[Viktor]

This post is deleted!

[Viktor]

Here is cmd:
sudo ./veye_mipi_i2c.sh -w -f videoformat -p1 PAL
sudo ./veye_mipi_i2c.sh -w -f wdrmode -b 7 -p1 0x00
sudo ./veye_mipi_i2c.sh -w -f mshutter -b 7 -p1 0x40

So it is a daylight. Sensor has auto shutter mode, cars speed is slow because it is parking barrier.

Why is double image?

[veye_xumm]

@viktor said in I2c tools failed:
please add this one :
./veye_mipi_i2c.sh -w -f denoise -p1 x00 -b7

[Viktor]

Thanks. Looks like fixed.

[veye_xumm]

@viktor
OK. So 3D denoise is the key. You can try to have a low level 2d denoise.

[Viktor]

Thank you Meng.

[veye_xumm]

@viktor
You are welcome.