@veye_xumm Ok

Hi Meng, does imx327s driver supports Bullseye 64bit now?

Ok, will connect wire from IRLED to gpio.

Hi Meng,

It is possible to know when IR-CUT triggered? Reading GPIO, I2C or other software way.

Best regards, Viktor.

Thank you.

@veye_xumm Yes, works, thanks.

Hi Meng,

Problem with post update after few minutes was not solved.

Before it was message 3600s
Now it is:
ERROR
You are only allowed to edit posts for 36000 second(s) after posting

Hi Meng,

I am trying imx327s at night with IR.

1. It is possible to limit max exposure time for auto exposure mode (mshutter 0x40)?

2. Explain please aespeed cmd and pX units.

It is my solution now:

sudo ./veye_mipi_i2c.sh -w -f irtrigger -p1 1 -b 10
sudo ./veye_mipi_i2c.sh -w -f ircutdir -p1 1 -b 10

Please update imx327s wiki, there no irtrigger cmd.

Thanks.
Solved.

Thank you, will test and reply.