I2c tools failed

[veye_xumm]

@viktor said in I2c tools failed:

Have tried mshutter, but shadows presents in all cases.

Pls try close wdr as I suggested before.

[Viktor]

Wdr already closed.
May be i should restart system?

Pal i set before run programm.
But other controls can i set before too?

[veye_xumm]

@viktor

1. pls post your cmd to close wdr.
2. pls try close 3d denoise.

[Viktor]

This post is deleted!

[Viktor]

Here is cmd:
sudo ./veye_mipi_i2c.sh -w -f videoformat -p1 PAL
sudo ./veye_mipi_i2c.sh -w -f wdrmode -b 7 -p1 0x00
sudo ./veye_mipi_i2c.sh -w -f mshutter -b 7 -p1 0x40

So it is a daylight. Sensor has auto shutter mode, cars speed is slow because it is parking barrier.

Why is double image?

[veye_xumm]

@viktor said in I2c tools failed:
please add this one :
./veye_mipi_i2c.sh -w -f denoise -p1 x00 -b7

[Viktor]

Thanks. Looks like fixed.

[veye_xumm]

@viktor
OK. So 3D denoise is the key. You can try to have a low level 2d denoise.

[Viktor]

Thank you Meng.

[veye_xumm]

@viktor
You are welcome.