imx307工作着突然不出图了，mipi数据无信号
-
如标题所述，工作途中突然不工作了，上电mipi无信号，i2c也无法访问。测试点的电压正常。mipi信号线偶尔出现电平变化 。
-
@wfx 你的使用方法有什么变化吗？ 或者有啥异常操作？
看你现在的现象，只能寄回返修了。 -
@veye_xumm 没有，正常工作过程中屏幕突然没图像，重启也不行。
-
@veye_xumm 大概原因找到了。是供电。测下来是 3.3V，但是电流一直在变化，怀疑供电电源芯片过热重启。
-
@wfx 哦哦，好的。
-
您好，请问这个问题您最终是怎么解决的呢？我也碰到这个问题，是将模组改成5V供电还是将ADP -N2载板改为12V外部供电呢？
-
@veye_xumm 请问IMX-307 六路摄像头长时间预览你们调试过吗？我这边每次打开视频预览都会有一两路模组工作一段时间后出现彩色条纹干扰，然后卡顿失效。
-
@vladimi-zheng 他这个跟你的问题应该不是一回事。你这个我首先怀疑fpc叠放，引起了信号串扰。
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login