插上树霉派,怎么弄都找不到video0设备
-

请问我还需要做些什么吗?还是这个板子坏掉了?
-
@luchec
首先不要怀疑板子坏了。
第二,如果想用v4l2模式,需要增加关于我们摄像头的驱动到树莓派内核。很可能需要重新编译代码。这种模式才会有/dev/video0
http://wiki.veye.cc/index.php/V4L2_mode_for_Raspberry_Pi/zh
第三,如果使用veye_rapicam命令形式,这种不需要编译驱动,按照步骤操作就可以了。
http://wiki.veye.cc/index.php/VEYE_MIPI_290/327_for_Raspberry_Pi/zh
刚才你最后一个截图,不知预览是否成功呢? 在HDMI显示器上有没有视频? -
@veye_xumm said in 插上树霉派,怎么弄都找不到video0设备:
http://wiki.veye.cc/index.php/VEYE_MIPI_290/327_for_Raspberry_Pi/zh
好的,OK了,可以显示了,谢谢
-
@luchec 不客气
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login