IMX287M on CM4 Bullseye 11 Linux 6.1.21
-
Hi, I'm trying to run the IMX287M camera on a Compute Module 4 running Bullseye 11 and Linux 6.1.21v8+.
I'm following the instructions in the Wiki:
https://wiki.veye.cc/index.php/Mv_series_camera_appnotes_4_rpiI enabled I2C on the CM4, connected the power DuPont cables and installed the driver, but when running
dmesg | grep mvcamI get the error
pi@raspberrypi:~ $ dmesg | grep mvcam [ 0.071124] platform fe801000.csi: Fixed dependency cycle(s) with /soc/i2c0mux/i2c@1/veyemvcam@3b [ 8.791147] veye_mvcam: loading out-of-tree module taints kernel. [ 8.800226] mvcam 10-003b: veye mv series camera driver version: 01.01.04 [ 8.806688] mvcam 10-003b: Unable to load veye_vbyone driver,will go on [ 9.310786] mvcam: mvcam_read: Reading register 0x04 failed [ 9.310817] mvcam 10-003b: failed to read chip idAnd I get no device on
/dev/video0(so I can't use thev4l2-ctlcommands).
-
@etale_cohomology
I think the FFC cable direction is wrong here.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login