veye_mipi_i2c.sh Raspberry Pi 5
-
Hi
veye_mipi_i2c.sh is not working for mepi@pi:~/raspberrypi/i2c_cmd/bin $ ./veye_mipi_i2c.sh -b 6 -w -f daynightmode -p1 0xFE w daynightmode is 0xfe pi@pi:~/raspberrypi/i2c_cmd/bin $ ./veye_mipi_i2c.sh -r -f daynightmode r daynightmode is 0xffAny write operation is not set.
I get this error ./camera_i2c_config
pi@pi:~/raspberrypi/i2c_cmd/bin $ ./camera_i2c_config setting GPIO for board revsion: d04170 Failed: don't know how to set GPIO for this board! Type is 17 Use i2c-10 for the sensor (-y 10) -
Raspberry Pi 5 is special, its i2c bus is 4 and 6. meanwhile, Raspberry Pi need to configure the parameters in advance, please refer to this link below:
https://wiki.veye.cc/index.php/V4L2_mode_for_Raspberry_Pi#Raspberry_Pi_5_Setting
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login