@veye_xumm
hi , i use mv_probe.sh in jetpack6.0 and i get same resault when i use jetpack5.1.2, yet i get black screan when i use this pipeline:

gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)GRAY8, width=2048, height=1544, framerate=(fraction)55/1" ! videoconvert ! autovideosink sync=false -v

Hello
I installed the imx265 camera drivers on the A603 board from seeedstudio with Jetson orin nx 8gb and Jetpack 36.4.0 but it doesn't give me an image. In the image below I put the output of the dmesg:

@veye_xumm I use MV-MIPI-IMX265 But unfortunately, I don't have the official nvidia boards and I will be happy if you guide me on this board

@veye_xumm
hello , I have exactly the same problem and this problem occurs when the object in the image starts to move or the camera itself moves, below is my camera version , i use jetson orin nx with carrier SeeedStudio A608
--> version is C 01.34 and L 02.02