Posts made by serene

@veye_xumm
What I meant was, on that product description (CS-TX2-XAVIER-nCAM-IMX385), it says that it supports Raspberry Pi. But you mentioned that Raspberry Pi doesn't support 4 cameras.

Could you clarify what it means?

Hi, what's the difference between VEYE-MIPI series vs. CS-MIPI series?

@veye_xumm
Thank you.

I found CS-TX2-XAVIER-nCAM-IMX385 in Amazon:
Amazon - CS-TX2-XAVIER-nCAM-IMX385

On the description it says:
"Support Raspberry Pi Zero & W,Pi 4,3 b+,Pi 3, Pi CM. Jetson Nano, Xavier NX."

Btw, how about with UCM-iMX8PLUS that has 2x MIPI-CSI, 4 data lanes?

@veye_xumm
Thank you. How about MIPI CS-2?
Do you have a set of breakout board with 4 cameras that is compatible with Jetson (Nano and TX2) and Raspberry Pi equivalent - i.e. ASUS Tinkerboard (RK3399) and NXP iMX8M SBC?

@veye_xumm
Thank you for the prompt response.

How about for GMSL2?

Hi,

I am interested in 4 camera system over FPD-Link III that would work with Jetson Nano, TX2, and ARM-based system (i.e. RK3399) such as ASUS Tinkerboard.

Is there any VEYE product in CS-FPD-CAM series with that spec?

Thanks.