@veye_xumm i think so. please see screens attached: [image: 1775573271193-1.png] [image: 1775573271002-2.png] when i copied .dts files from veye i saw errors building missing files. i tried to build on: orange pi 5 tablet VM machine with Ubuntu 22.04 installed got the same errors. please check your files.

@nkos Sorry, regarding the attempt to port the camera to the Radxa Zero 3 + 6.x, we tried to set up the standard build environment but were unable to compile successfully. I posted a question on the Radxa forum, but have not yet received a follow-up response. As for the method you mentioned to configure our registers, we recommend that you do not use the driver. Instead, please use our mv_mipi_i2c.sh script. https://wiki.veye.cc/index.php/Mv_mipi_i2c.sh_user_guide

@veye_xumm Thanks for the answer, have a happy holiday!

@xlwvu7mx You are welcome.

@nkos Cheers!

@jhaijun 不好意思我们这个论坛是只针对我们公司自己产品的。 sony 机芯的话确实没有搞过。

@jihua 我们在rk平台没有遇到过这个问题。看ecc2这个错误提示的话，像是mipi信号劣化了。

@xu 识别到产品型号了，正常。

@scroll 您好，我使用其他的相机，遇到了和您一样的问题，请问您解决了吗？

@cheesefish 光斑应该来自某种你没弄明白的光源，你可以拍摄一下远处外景对比一下。 亮度整体变化是你的环境光变化导致的。

@cheesefish 好的，不客气。

@natzguk pls try this: https://github.com/veyeimaging/rk35xx_firefly/blob/main/linux/samples/gstreamer/veye camera/preview.sh

@yd 已添加，请通过。

@m4416202 请问取图的时候有什么报错吗？ dts是否已根据你的主板上的硬件做了调整？

@zly said in 有关IMX385摄像头的驱动问题: s there a corresponding driver for the MIPI IMX385 camera on rockpiN10? Can’t use it? If a driver exists for the MIPI IMX385 camera on the Rock Pi N10, it could work, but it depends on compatibility. Check with the manufacturer or developer community for specific information on available drivers for that setup.

@teo-chan 不客气。

已私信。已私信。