How to change FPD-Link 3 Operating Mode (CSI-2 mode -> raw mode)
-
I want to change Operating mode (CSI-2 mode -> raw mode)
How can I do this?
I know the input mode of operation is controlled by the FPD3_MODE(Register 0x6D[1:0])
How can I set the value of this MODE?
please let me know the process..I'm using CS-FPD-XAVIER-nCAM Series DevKit and TI DS90UB913A-Q1 Camera.
-
@yongjin
Since our camera module do not support raw output mode, I think it is meaningless to change the fpdlink mode to raw. -
@veye_xumm I have cam(TI DS90UB913A-Q1 serializer) which can be operated raw mode and I want adapt them to Jetson xavier via FPD-LINK3-2RX. Can you explain how to do it?
-
@yongjin Because we do not do raw camera module, so we really do not have this kind of debugging experience. It should be just to adjust some registers.
-
@veye_xumm Can you explain how to adjust registers? I have no experience about that.
-
@yongjin via i2c
-
@veye_xumm
Hi Xumm.Unfortunately, I can't understand your meaning.
Please let me know more detail procedure.one more If adjusting by I2C, it needs another special tool??
Please understand I'm beginner on this technique
-
@yongjin
I don't know what your current state of knowledge is. If you don't understand i2C, you don't understand fpdlink, you don't understand registers. I think you should first learn the basics and be able to understand the information and code we provide now, and then proceed to your next work.
Good luck.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login