SOLVED 签名文件
-
@wzy
应该在你host pc的 Linux_for_Tegra目录下。 -
@veye_xumm xavier烧系统是那台主机？这个分区需要在NVIDIA SDKmanger里面烧？
-
@wzy
是的。
你用sdk manager烧写完标准系统之后，就可以看到flash.sh脚本了。 其实sdk manager本身也是调用的这个脚本进行的固件烧写。 -
@veye_xumm 是把Xavier下载的dtb文件拷贝到Host pc 的/kernel/dtb/文件里，然后在执行flash脚本就ok了？
-
@wzy
是的，详细步骤请参考wiki -
@veye_xumm
执行dmesg | grep veye327 后的结果，是这样的。是哪出了问题吗？ -
@wzy 我看你用的是fpdlink接口的327，应该用fpdlink目录下的dtb文件。
-
@veye_xumm said in 签名文件:
fpdlink目录下的dtb文件
这个文件的路径在哪？拷贝到host pc，再烧一遍？ -
@wzy
在github的dtb目录，如图。上面这个fpdlink的指的是veye327-fpdlink的型号。 你需要用这个目录下的dtb。 -
@veye_xumm
怎么没找到啊？你给复制个完整的git地址 -
@wzy
我用4.4的版本试过了，还是报的这个错！测试脚本也没有跑起来。mogo@mogo-desktop:~/nvidia_jetson_veye_bsp/i2c_cmd/bin$ ./veye_mipi_i2c.sh -r -f devid
-bash: ./veye_mipi_i2c.sh: Permission denied报错
-
请参考这个，注意提供12V供电，注意fpc排线方向。
http://wiki.veye.cc/index.php/CS-FPD-XAVIER-nCAM_Series-bash: ./veye_mipi_i2c.sh: Permission denied
这个要加一个可执行权限
chmod +x *主要为了将参数配置到特定的camera，要用-b [busnum]参数，-d [address]参数。
-
@veye_xumm
还是报那个错误！ -
@wzy
把整个dmesg打印的东西导出来保存到文件里面，作为附件贴上来看一下。 -
mogo@mogo-desktop:~$ dmesg | grep veye327
[ 1.941399] veye327 30-003b: probing v4l2 sensor
[ 1.941742] veye327 30-003b: devm_clk_get failed for pllp_grtba
[ 1.941810] veye327 30-003b: tegracam sensor driver:veye327_v2.0.6
[ 1.942564] veye327 30-003b: veye327_board_setup: error during i2c read probe (-121)
[ 1.942651] veye327 30-003b: board setup failed
[ 1.942741] veye327: probe of 30-003b failed with error -121
[ 1.942775] veye327 30-003c: probing v4l2 sensor
[ 1.942901] veye327 30-003c: devm_clk_get failed for pllp_grtba
[ 1.942992] veye327 30-003c: couldn't create debugfs
[ 1.942997] veye327 30-003c: tegracam sensor driver:veye327_v2.0.6
[ 1.943657] veye327 30-003c: veye327_board_setup: error during i2c read probe (-121)
[ 1.943729] veye327 30-003c: board setup failed
[ 1.943792] veye327: probe of 30-003c failed with error -121
[ 1.943824] veye327 31-003b: probing v4l2 sensor
[ 1.943936] veye327 31-003b: devm_clk_get failed for pllp_grtba
[ 1.943991] veye327 31-003b: tegracam sensor driver:veye327_v2.0.6
[ 1.944593] veye327 31-003b: veye327_board_setup: error during i2c read probe (-121)
[ 1.944664] veye327 31-003b: board setup failed
[ 1.944731] veye327: probe of 31-003b failed with error -121
[ 1.944761] veye327 31-003c: probing v4l2 sensor
[ 1.944869] veye327 31-003c: devm_clk_get failed for pllp_grtba
[ 1.944926] veye327 31-003c: couldn't create debugfs
[ 1.944952] veye327 31-003c: tegracam sensor driver:veye327_v2.0.6
[ 1.945589] veye327 31-003c: veye327_board_setup: error during i2c read probe (-121)
[ 1.945670] veye327 31-003c: board setup failed
[ 1.945756] veye327: probe of 31-003c failed with error -121
[ 1.945788] veye327 32-003b: probing v4l2 sensor
[ 1.945871] veye327 32-003b: devm_clk_get failed for pllp_grtba
[ 1.945927] veye327 32-003b: tegracam sensor driver:veye327_v2.0.6
[ 1.946580] veye327 32-003b: veye327_board_setup: error during i2c read probe (-121)
[ 1.946651] veye327 32-003b: board setup failed
[ 1.946711] veye327: probe of 32-003b failed with error -121
[ 1.946741] veye327 32-003c: probing v4l2 sensor
[ 1.946815] veye327 32-003c: devm_clk_get failed for pllp_grtba
[ 1.946872] veye327 32-003c: couldn't create debugfs
[ 1.946877] veye327 32-003c: tegracam sensor driver:veye327_v2.0.6
[ 1.947473] veye327 32-003c: veye327_board_setup: error during i2c read probe (-121)
[ 1.947587] veye327 32-003c: board setup failed
[ 1.947646] veye327: probe of 32-003c failed with error -121
[ 1.947700] veye327 33-003b: probing v4l2 sensor
[ 1.947785] veye327 33-003b: devm_clk_get failed for pllp_grtba
[ 1.947912] veye327 33-003b: tegracam sensor driver:veye327_v2.0.6
[ 1.948527] veye327 33-003b: veye327_board_setup: error during i2c read probe (-121)
[ 1.948596] veye327 33-003b: board setup failed
[ 1.948656] veye327: probe of 33-003b failed with error -121
[ 1.948686] veye327 33-003c: probing v4l2 sensor
[ 1.948757] veye327 33-003c: devm_clk_get failed for pllp_grtba
[ 1.948814] veye327 33-003c: couldn't create debugfs
[ 1.948818] veye327 33-003c: tegracam sensor driver:veye327_v2.0.6
[ 1.949431] veye327 33-003c: veye327_board_setup: error during i2c read probe (-121)
[ 1.949512] veye327 33-003c: board setup failed
[ 1.949574] veye327: probe of 33-003c failed with error -121 -
-
@veye_xumm 没有变化，还是那样。
-
@wzy
执行一下上个帖子的命令，结果发给我 -
-
@wzy
dmesg 不要加grep，把整个输出都保存起来。作为附件发上来看看。
