lowlight in veye_mipi_i2c.sh seems to do nothing
-
Hi, I have tested several value with the lowlight function of veye_mipi_i2c.sh, but it doesn't seem to do anything. Can you please tell me if I have to set other parameters to make this function working ?
Thanks -
@watchever
Please follow these steps to test:
1../veye_mipi_i2c.sh -w -f lowlight -p1 0x11- preview
- Completely cover the lens.
You can see a significant reduction in the frame rate.
-
You mean that this parameter cannot be setup on live during preview but must be setup before starting preview ?
-
@watchever
No.
The above steps do not require a sequence of operations. It's just a piece of advice to see the effect more clearly. -
Yes it does work, thanks, however if I change shutter speed it seems to erase the framerate setting ? Do you confirm ?
-
@watchever
just lowlight setting will affect frame rate if your val is not 0x00 and the environment is in low illuminance. -
@veye_xumm many thanks, in the VEYE wiki it is said : "value is exposure time（seconds）
If value is greater than or equal to 0x4B, it will reduce framerate"
So I guess that if you define low shutter speed value it also affect frame rate ?
Thanks
-
@watchever
I think what you mentioned is mshutter. Yes, of course.
mshutter :
If you use manual mode, the exposure time will be independent of the ambient brightness.
