@veye_xumm yes but CS series don't have same sensor and are not as sensitive as VEYE series (especially 462 and 327).
Is it a material limit or could be solved by a development on your side : add a specific register to set framerate ? Thanks

@veye_xumm thanks, I really need to reduce pixel refesh rate on the material side, is it possible ?

Is there a way to fully deactivate the auto exposure algorithm ? I think when I manually set mshutter it it the case ?

@veye_xumm thanks, if I well understand nodf ignore some frames but not really reduce the material framerate. Am I wrong ?

Thanks

@veye_xumm I use mshutter for shutter speed and lowlight for framerate.

Hello, is it possible to set separetly framerate and shutter speed ? When I set shutter speed it seems to erase my framerate settings and the same happens when I set framerate, it seems shutter speed setting is erased.
Can you confirm and let me know if it is possible to keep the two settings ?
I want to get the best light sensitivity possible, testing on VEYE 327 and 462.
Thanks

I have both camera modules VEYE MIPI 462 and VEYE MIPI 327. My program works fine with the VEYE MIPI 462 but not with the 327. It is like the VEYE MIPI 327 is not detected, because it says 'failed to write register index...'. Your script, like veye_raspipreview, also does not work. Do I have to plug the 5V on the board of the MIPI 327 or like the MIPI 462 it is not necessary (I guess that MIPI 462 get voltage from the CSI cable) ?
Thanks for your help

@veye_xumm one more question, what is your most light sensitive sensor ?
Thanks

@veye_xumm Thanks, but I would need a high sensitive sensor like IMX462 or IMX290 and not sure you have one in CS-MIPI version ?

Can you please confirm that when I set AGC to 0x0 value, it sets auto gain control to off ?

And another question regarding AESPEED parameter, is it possible to set separatly agc speed and shutter speed (is it same as mshutter parameter) ?

And last question which parameters and values combinaison should I set to have the most sensitive light setup with fully manual adjustment ?

Thanks a lot for your valuable help