UNSOLVED imx462 cant configure
-
hello.
i work with imx462 on cm4_nano_b with compute module 4 Raspbian Bullseye 64bit.
and i see menu when use gstreamer :
how to fix that ?
trying to fix that i follow this link:
http://wiki.veye.cc/index.php/VEYE-MIPI-290/327_i2c/
but when i execute:
./camera_i2c_config
i see:setting GPIO for board revsion: c03140 CM4 - assume CAM1 on 44&45 ./camera_i2c_config: 255: rpi3-gpiovirtbuf: not found Use i2c-10 for the sensor (-y 10)
that`s strange as i have rpi3-gpiovirtbuf in dir and i did
sudo chmod +x for it.may be there are configs for 32bit ?
how to set camera in 64bit OS ?please help.
-
@zoldaten said in imx462 cant configure:
how to set camera in 64bit OS ?
run
make.sh
ini2c_cmd\source\i2c_tools
and copy the output binaries toi2c_cmd\bin
@zoldaten said in imx462 cant configure:
how to fix that ?
Add this line to the bottom of veye_mipi_i2c.sh
./i2c_write $I2C_DEV $I2C_ADDR 0x07 0xFF>/dev/null 2>&1