IMX307设置640*480，产品不在图像中心
-
IMX307，调用./cs_mipi_i2c.sh -w -f videofmt -p1 640 -p2 480 -p3 130，这个之后，产品不能放在相机的正上方，在正上方的时候看不到产品，要偏离镜头5cm左右产品才能显示在图像上。这个是为什么？是有需要设置偏移？如果需要怎么设置
-
-
@beck 请读取一下版本号。发给我看看。
-
@veye_xumm
hardware logic version is 0x30
firmware version is 2.27videofmtcap num 1 width 1920 height 1080 framerate 30
videofmtcap num 2 width 1280 height 720 framerate 60
videofmtcap num 3 width 640 height 480 framerate 130 -
@beck
这个问题已经解决，可以查看这个版本记录：
https://wiki.veye.cc/index.php/CS-MIPI-IMX307_version_log/zh升级固件的方式，请参考下面这个链接;
https://wiki.veye.cc/index.php/USB升级固件方法 -
@veye_xumm 请问这个hardware version 0x30 这个硬件的版本号就是固定的，然后找最新的firmware 就行了是不是？
-
@beck 提供的升级包，这两个版本是一对一绑定的。你找最新的firmware就可以。
-
@veye_xumm 请问这个板子上的升级用的usb口（J1）是hp2.0还是xh2.5.4?
-
@beck 1.25间距的白端子。
-
-
@veye_xumm 多谢
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login