RAW-MIPI-SC132M硬触发导致图像采集丢失
-
case1
在触发模式下，硬触发方式获取图像，设置的硬触发频率是20hz的上升沿信号；进行帧率统计，发现在持续一段时间后出现无法获取图像、图像丢失的情况。如下图所示。
dmesg输出如下：
case2
在流模式下，给予触发信号同样会导致出现此问题，如下图所示。
dmesg输出如下：
环境：
Edge2开发板，通过mipi加转接板连接到相机。（转接板的问题？）
gpio使用line 11触发：
-
@cheesefish
根据你的这个提示，应该是mipi信号质量太差了。
你可否拍一下整个系统的照片，再拍一下转接板的正反面照片我看看。
注意，排线长度不能太长；转接板上mipi信号要注意等长处理，阻抗匹配；应用环境的电磁干扰多不多？ -
@veye_xumm 非常感谢！
确实是线太长了，换成短线后就没这个问题了! -
@cheesefish 好的，不客气。
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login