@veye_xumm
Hello We don't get any support from avermedia except that they say your camera is not supported.

What other option do I have except than changing carrier board?

which one do you advice to use for a jetson nano module?

Thanks

@veye_xumm we use this carrier board
we use the J4 connector, please check https://storage.avermedia.com/web_release_www/EN715/AVerAI_UM_EN715_VB_CB_BPC_20210519_.pdf

the pinout is the same as per your documentation

https://e1.pcloud.link/publink/show?code=XZqglJZzVIX8mPQCgRtRLz3wH7Cnf61lPNX
https://e1.pcloud.link/publink/show?code=XZ6glJZD5yEGWmd3B5QBr5odRlsVJAE9ggk

[photo](file:///home/philippe/pCloudDrive/projet_drones/multimedia/2021/novembre/IMG_20211129_103747.jpg)

FCC cable connection has been double checked, everything seems to be ok

dmesg | grep cssc132
[ 1.356320] cssc132 7-003b: probing v4l2 sensor
[ 1.356852] cssc132 7-003b: tegracam sensor driver:cssc132_v2.0.6
[ 1.357098] cssc132 7-003b: cs_sc132_board_setup: error during i2c read probe (-121)
[ 1.357101] cssc132 7-003b: board setup failed
[ 1.357159] cssc132: probe of 7-003b failed with error -121
[ 1.357205] cssc132 8-003b: probing v4l2 sensor
[ 1.357602] cssc132 8-003b: tegracam sensor driver:cssc132_v2.0.6
[ 1.357831] cssc132 8-003b: cs_sc132_board_setup: error during i2c read probe (-121)
[ 1.357835] cssc132 8-003b: board setup failed
[ 1.357884] cssc132: probe of 8-003b failed with error -121

ls /proc/device-tree/cam_i2cmux/i2c@*
/proc/device-tree/cam_i2cmux/i2c@0:
'#address-cells' phandle rbpcv2_veye327_a@3b '#size-cells'
ds90ub954_a@30 rbpcv2_csimx307_a@3b rbpcv2_veyecam_a@3b status
linux,phandle rbpcv2_cssc132_a@3b rbpcv3_imx477_a@1a
name rbpcv2_imx219_a@10 reg

/proc/device-tree/cam_i2cmux/i2c@1:
'#address-cells' phandle rbpcv2_veye327_e@3b '#size-cells'
ds90ub954_b@30 rbpcv2_csimx307_e@3b rbpcv2_veyecam_e@3b status
linux,phandle rbpcv2_cssc132_e@3b rbpcv3_imx477_e@1a
name rbpcv2_imx219_e@10 reg

Hello, the new kernel is loaded and new BSP file has been inserted, but the camera is not detected on jetson nano module

Thanks in advance for any help that you could provide.