Navigation

    VEYE IMAGING Forum

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Recent
    • Popular
    • Users
    • WIKI
    • veye.cc

    IMX327S IR-Cut Heat

    VEYE MIPI camera
    2
    4
    804
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      newleaf last edited by

      Currently testing the IMX327S with a reComputer Jetson Xavier. Everything works perfectly, including the I2C tool to control the IR-cut filter. However, I am noticing that that the IR-cut filter device seems to generate a good amount of heat. To the point you can't touch it for too long. I am using the recommended wiring as documented on the Wiki, where 5V is also provided to the module in addition to the CSI connection. Is this normal? Thx!

      N 1 Reply Last reply Reply Quote 0
      • N
        newleaf @newleaf last edited by newleaf

        @newleaf Actually, this could be residual heat from when the sensor was streaming some video. I had video off for 30 minutes and its cooled down a bit. I was a little surprise how much the IR-cut filter heated up however. I will keep testing.

        veye_xumm 1 Reply Last reply Reply Quote 0
        • veye_xumm
          veye_xumm @newleaf last edited by

          @newleaf
          Based on my experience, this heat is not generated by IRCUT, but by the camera module itself.
          Indeed, many customers have reported that this camera module is hotter than expected, but there is no need to worry, as it does not affect stability.

          N 1 Reply Last reply Reply Quote 0
          • N
            newleaf @veye_xumm last edited by

            @veye_xumm Thank you. And agreed, it's heat transfer. Everything is stable and works great. Good to know it's normal.

            1 Reply Last reply Reply Quote 0
            • First post
              Last post