RK3568 GC8034 相机预览画面异常绿屏
-
描述
我这边用的是2 lane配置，dts文件如下 -
/** EVB3568 V2 csi split mode */ /{ vcc_camera: vcc-camera-regulator { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_pwr>; regulator-name = "vcc_camera"; enable-active-high; regulator-always-on; regulator-boot-on; }; flash_sgm3141:flash-sgm3141 { status = "okay"; compatible = "sgmicro,sgm3141"; label = "gpio-flash"; pinctrl-names = "default"; pinctrl-0 = <&flash_led_gpios>; led-max-microamp = <20000>; flash-max-microamp = <20000>; flash-max-timeout-us = <1000000>; strobe-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; }; }; &i2c4 { status = "okay"; /* dw9714: dw9714@0c { compatible = "dongwoon,dw9714"; status = "okay"; reg = <0x0c>; rockchip,camera-module-index = <0>; rockchip,vcm-max-current = <100>; rockchip,vcm-start-current = <0>; rockchip,vcm-rated-current = <100>; rockchip,vcm-step-mode = <0xd>; rockchip,vcm-dlc-enable = <0>; rockchip,vcm-mclk = <0>; rockchip,vcm-t-src = <0>; rockchip,camera-module-facing = "back"; //"fornt"; }; gc8034: gc8034@37 { status = "okay"; compatible = "galaxycore,gc8034"; reg = <0x37>; clocks = <&cru CLK_CAM0_OUT>; clock-names = "xvclk"; power-domains = <&power RK3568_PD_VI>; pinctrl-names = "default"; pinctrl-0 = <&cam_clkout0>; //pinctrl-1 = <&cam_split_2>; // power-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; // reset-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; // pwdn-gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; pwdn-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>; rockchip,grf = <&grf>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; rockchip,camera-module-name = "RK-CMK-8M-2-v1"; rockchip,camera-module-lens-name = "CK8401"; lens-focus = <&dw9714>; flash-leds = <&flash_sgm3141>; port { gc8034_2_out: endpoint { remote-endpoint = <&dphy1_in>; data-lanes = <1 2>; }; }; }; */ ov8858: ov8858@36 { status = "disabled"; compatible = "ovti,ov8858"; reg = <0x36>; //36,10 clocks = <&cru CLK_CAM0_OUT>; clock-names = "xvclk"; power-domains = <&power RK3568_PD_VI>; pinctrl-names = "default"; pinctrl-0 = <&cam_clkout0>; //pinctrl-1 = <&cam_split_1>; reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>; pwdn-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>; rockchip,camera-module-index = <1>; rockchip,camera-module-facing = "front"; rockchip,camera-module-name = "HS5885-BNSM1018-V01"; rockchip,camera-module-lens-name = "default"; port { ov8858_out: endpoint { remote-endpoint = <&dphy1_in_ov8858>; data-lanes = <1 2>; }; }; }; }; &i2c2 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c2m1_xfer>; dw9714: dw9714@0c { compatible = "dongwoon,dw9714"; status = "okay"; reg = <0x0c>; rockchip,camera-module-index = <0>; rockchip,vcm-max-current = <100>; rockchip,vcm-start-current = <0>; rockchip,vcm-rated-current = <100>; rockchip,vcm-step-mode = <0xd>; rockchip,vcm-dlc-enable = <0>; rockchip,vcm-mclk = <0>; rockchip,vcm-t-src = <0>; rockchip,camera-module-facing = "back"; //"fornt"; }; gc8034: gc8034@37 { status = "okay"; compatible = "galaxycore,gc8034"; reg = <0x37>; clocks = <&cru CLK_CAM1_OUT>; clock-names = "xvclk"; power-domains = <&power RK3568_PD_VI>; pinctrl-names = "default"; pinctrl-0 = <&cam_clkout1>; //pinctrl-1 = <&cam_split_2>; // power-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; pwdn-gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>; rockchip,grf = <&grf>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; rockchip,camera-module-name = "RK-CMK-8M-2-v1"; rockchip,camera-module-lens-name = "CK8401"; lens-focus = <&dw9714>; flash-leds = <&flash_sgm3141>; port { gc8034_2_out: endpoint { remote-endpoint = <&dphy2_in>; data-lanes = <1 2>; }; }; }; }; &csi2_dphy0 { status = "disabled"; }; &csi2_dphy1 { status = "okay"; /* * dphy1 only used for split mode, * can be used concurrently with dphy2 * full mode and split mode are mutually exclusive */ ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; dphy1_in_ov8858: endpoint@1 { reg = <1>; remote-endpoint = <&ov8858_out>; data-lanes = <1 2>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; dphy1_out: endpoint@1 { reg = <1>; remote-endpoint = <&isp0_in>; }; }; }; }; &csi2_dphy2 { status = "okay"; /* * dphy2 only used for split mode, * can be used concurrently with dphy1 * full mode and split mode are mutually exclusive */ ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; dphy2_in: endpoint@1 { reg = <1>; remote-endpoint = <&gc8034_2_out>; data-lanes = <1 2>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; dphy2_out: endpoint@1 { reg = <1>; remote-endpoint = <&mipi_csi2_input>; }; }; }; }; &mipi_csi2 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; mipi_csi2_input: endpoint@1 { reg = <1>; remote-endpoint = <&dphy2_out>; data-lanes = <1 2>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; mipi_csi2_output: endpoint@0 { reg = <0>; remote-endpoint = <&cif_mipi_in>; data-lanes = <1 2>; }; }; }; }; &rkcif_mipi_lvds { status = "okay"; port { cif_mipi_in: endpoint { remote-endpoint = <&mipi_csi2_output>; data-lanes = <1 2>; }; }; }; &rkcif_mipi_lvds_sditf { status = "okay"; port { mipi_lvds_sditf: endpoint { remote-endpoint = <&isp1_in>; data-lanes = <1 2>; }; }; }; &csi2_dphy_hw { status = "okay"; }; &rkisp { status = "okay"; }; &rkisp_mmu { status = "okay"; }; &rkisp_vir0 { status = "okay"; port { #address-cells = <1>; #size-cells = <0>; isp0_in: endpoint@0 { reg = <0>; remote-endpoint = <&dphy1_out>; }; }; }; &rkisp_vir1 { status = "okay"; port { #address-cells = <1>; #size-cells = <0>; isp1_in: endpoint@0 { reg = <0>; remote-endpoint = <&mipi_lvds_sditf>; }; }; }; &rkcif_mmu { status = "okay"; }; &rkcif { status = "okay"; }; &pinctrl { cam { camera_pwr: camera-pwr { rockchip,pins = /* camera power en */ <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; camera_pins { cam_split_1: cam_split-1 { rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>, <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; cam_split_2: cam_split-2 { rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>, <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; }; }; flash-led { flash_led_gpios: flash-led { rockchip,pins = /* flash led enable*/ <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>, <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; -
@scroll 你好，gc8034不是我们的产品。
-
@scroll 您好，我使用其他的相机，遇到了和您一样的问题，请问您解决了吗？
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login