RK3568 GC8034 相机预览画面异常绿屏
-
描述
我这边用的是2 lane配置，dts文件如下 -
/** EVB3568 V2 csi split mode */ /{ vcc_camera: vcc-camera-regulator { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_pwr>; regulator-name = "vcc_camera"; enable-active-high; regulator-always-on; regulator-boot-on; }; flash_sgm3141:flash-sgm3141 { status = "okay"; compatible = "sgmicro,sgm3141"; label = "gpio-flash"; pinctrl-names = "default"; pinctrl-0 = <&flash_led_gpios>; led-max-microamp = <20000>; flash-max-microamp = <20000>; flash-max-timeout-us = <1000000>; strobe-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; }; }; &i2c4 { status = "okay"; /* dw9714: dw9714@0c { compatible = "dongwoon,dw9714"; status = "okay"; reg = <0x0c>; rockchip,camera-module-index = <0>; rockchip,vcm-max-current = <100>; rockchip,vcm-start-current = <0>; rockchip,vcm-rated-current = <100>; rockchip,vcm-step-mode = <0xd>; rockchip,vcm-dlc-enable = <0>; rockchip,vcm-mclk = <0>; rockchip,vcm-t-src = <0>; rockchip,camera-module-facing = "back"; //"fornt"; }; gc8034: gc8034@37 { status = "okay"; compatible = "galaxycore,gc8034"; reg = <0x37>; clocks = <&cru CLK_CAM0_OUT>; clock-names = "xvclk"; power-domains = <&power RK3568_PD_VI>; pinctrl-names = "default"; pinctrl-0 = <&cam_clkout0>; //pinctrl-1 = <&cam_split_2>; // power-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; // reset-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; // pwdn-gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; pwdn-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>; rockchip,grf = <&grf>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; rockchip,camera-module-name = "RK-CMK-8M-2-v1"; rockchip,camera-module-lens-name = "CK8401"; lens-focus = <&dw9714>; flash-leds = <&flash_sgm3141>; port { gc8034_2_out: endpoint { remote-endpoint = <&dphy1_in>; data-lanes = <1 2>; }; }; }; */ ov8858: ov8858@36 { status = "disabled"; compatible = "ovti,ov8858"; reg = <0x36>; //36,10 clocks = <&cru CLK_CAM0_OUT>; clock-names = "xvclk"; power-domains = <&power RK3568_PD_VI>; pinctrl-names = "default"; pinctrl-0 = <&cam_clkout0>; //pinctrl-1 = <&cam_split_1>; reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>; pwdn-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>; rockchip,camera-module-index = <1>; rockchip,camera-module-facing = "front"; rockchip,camera-module-name = "HS5885-BNSM1018-V01"; rockchip,camera-module-lens-name = "default"; port { ov8858_out: endpoint { remote-endpoint = <&dphy1_in_ov8858>; data-lanes = <1 2>; }; }; }; }; &i2c2 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c2m1_xfer>; dw9714: dw9714@0c { compatible = "dongwoon,dw9714"; status = "okay"; reg = <0x0c>; rockchip,camera-module-index = <0>; rockchip,vcm-max-current = <100>; rockchip,vcm-start-current = <0>; rockchip,vcm-rated-current = <100>; rockchip,vcm-step-mode = <0xd>; rockchip,vcm-dlc-enable = <0>; rockchip,vcm-mclk = <0>; rockchip,vcm-t-src = <0>; rockchip,camera-module-facing = "back"; //"fornt"; }; gc8034: gc8034@37 { status = "okay"; compatible = "galaxycore,gc8034"; reg = <0x37>; clocks = <&cru CLK_CAM1_OUT>; clock-names = "xvclk"; power-domains = <&power RK3568_PD_VI>; pinctrl-names = "default"; pinctrl-0 = <&cam_clkout1>; //pinctrl-1 = <&cam_split_2>; // power-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; pwdn-gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>; rockchip,grf = <&grf>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; rockchip,camera-module-name = "RK-CMK-8M-2-v1"; rockchip,camera-module-lens-name = "CK8401"; lens-focus = <&dw9714>; flash-leds = <&flash_sgm3141>; port { gc8034_2_out: endpoint { remote-endpoint = <&dphy2_in>; data-lanes = <1 2>; }; }; }; }; &csi2_dphy0 { status = "disabled"; }; &csi2_dphy1 { status = "okay"; /* * dphy1 only used for split mode, * can be used concurrently with dphy2 * full mode and split mode are mutually exclusive */ ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; dphy1_in_ov8858: endpoint@1 { reg = <1>; remote-endpoint = <&ov8858_out>; data-lanes = <1 2>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; dphy1_out: endpoint@1 { reg = <1>; remote-endpoint = <&isp0_in>; }; }; }; }; &csi2_dphy2 { status = "okay"; /* * dphy2 only used for split mode, * can be used concurrently with dphy1 * full mode and split mode are mutually exclusive */ ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; dphy2_in: endpoint@1 { reg = <1>; remote-endpoint = <&gc8034_2_out>; data-lanes = <1 2>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; dphy2_out: endpoint@1 { reg = <1>; remote-endpoint = <&mipi_csi2_input>; }; }; }; }; &mipi_csi2 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; mipi_csi2_input: endpoint@1 { reg = <1>; remote-endpoint = <&dphy2_out>; data-lanes = <1 2>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; mipi_csi2_output: endpoint@0 { reg = <0>; remote-endpoint = <&cif_mipi_in>; data-lanes = <1 2>; }; }; }; }; &rkcif_mipi_lvds { status = "okay"; port { cif_mipi_in: endpoint { remote-endpoint = <&mipi_csi2_output>; data-lanes = <1 2>; }; }; }; &rkcif_mipi_lvds_sditf { status = "okay"; port { mipi_lvds_sditf: endpoint { remote-endpoint = <&isp1_in>; data-lanes = <1 2>; }; }; }; &csi2_dphy_hw { status = "okay"; }; &rkisp { status = "okay"; }; &rkisp_mmu { status = "okay"; }; &rkisp_vir0 { status = "okay"; port { #address-cells = <1>; #size-cells = <0>; isp0_in: endpoint@0 { reg = <0>; remote-endpoint = <&dphy1_out>; }; }; }; &rkisp_vir1 { status = "okay"; port { #address-cells = <1>; #size-cells = <0>; isp1_in: endpoint@0 { reg = <0>; remote-endpoint = <&mipi_lvds_sditf>; }; }; }; &rkcif_mmu { status = "okay"; }; &rkcif { status = "okay"; }; &pinctrl { cam { camera_pwr: camera-pwr { rockchip,pins = /* camera power en */ <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; camera_pins { cam_split_1: cam_split-1 { rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>, <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; cam_split_2: cam_split-2 { rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>, <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; }; }; flash-led { flash_led_gpios: flash-led { rockchip,pins = /* flash led enable*/ <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>, <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; -
@scroll 你好，gc8034不是我们的产品。
-
@scroll 您好，我使用其他的相机，遇到了和您一样的问题，请问您解决了吗？
