SOLVED VEYE imx385 驱动问题+
-
@flaty 可以的。
-
@veye_xumm dts 参考这个 可以吗？https://github.com/veyeimaging/rk35xx_firefly/tree/main/linux/drivers/rk358x
-
@flaty 就是这个。
-
@veye_xumm zhge dsi的头您看 有问题吗 检测不到相机，
#include "roc-rk3588s-pc.dtsi"//#include "rk3588-roc-pc-cam-8ms1m.dtsi"
//open this line to enable fpdlink-III link
//#include "rk3588-roc-pc-fpdlink-90ub954.dtsi"//open this line to enable v-by-one hs link
#include "rk3588-roc-pc-vbyone-overlay.dtsi"#include "rk3588-roc-pc-cam-veyecam2m.dtsi"
#include "rk3588-roc-pc-cam-veyemvcam.dtsi"#include "roc-rk3588s-pc-v10-diff.dtsi"
#define WHICHDSI 0 /* dsi0 = 0,dsi1 = 1*/ -
-
@veye_xumm 我再试一下吧，不知道咋回事，，，编译什么都没问题
-
@veye_xumm
[ 7.047946] veyecam2m 7-003b: veye camera driver version: 00.01.01
[ 7.047980] veyecam2m 7-003b: Failed to get power-gpios, maybe no use
[ 7.048101] veyecam2m 7-003b: supply avdd not found, using dummy regulator
[ 7.048213] veyecam2m 7-003b: supply dovdd not found, using dummy regulator
[ 7.048278] veyecam2m 7-003b: supply dvdd not found, using dummy regulator
[ 7.048303] veyecam2m 7-003b: could not get default pinstate
[ 7.048309] veyecam2m 7-003b: could not get sleep pinstate
[ 7.048320] veyecam2m 7-003b: Success to get veyecam2m endpoint data lanes, dts uses 2 lanes
[ 7.170539] veyecam2m 7-003b: camera id is veyecam2m
[ 7.173503] veyecam2m 7-003b: sensor is IMX385
[ 7.173564] veyecam2m 7-003b: board type is ONE board
[ 7.219705] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_veyecam2m 7-003b:bus type 5
以上电源的错误，但是ls /dev/video0 可以看到设备了 -
@flaty 这些报错都不用管。 我们的模组不需要这些供电。
-
@veye_xumm 测试 出图像了，搞定了 ，谢谢
-
@flaty 不客气。
