VEYE imx385 驱动问题+
-
@flaty 驱动源码你直接用github最新的就行。
-
@veye_xumm 编译错误 我把信息发给您看一下，是驱动里面的结构体
CC drivers/media/i2c/veyecam2m.o
drivers/media/i2c/veyecam2m.c: In function 'veyecam2m_g_mbus_config':
drivers/media/i2c/veyecam2m.c:419:24: error: 'V4L2_MBUS_CSI2' undeclared (first use in this function); did you mean 'V4L2_MBUS_CSI1'?
419 | config->type = V4L2_MBUS_CSI2;
| ^~~~~~~~~~~~~~
| V4L2_MBUS_CSI1
drivers/media/i2c/veyecam2m.c:419:24: note: each undeclared identifier is reported only once for each function it appears in
drivers/media/i2c/veyecam2m.c: At top level:
drivers/media/i2c/veyecam2m.c:898:3: error: 'const struct v4l2_subdev_video_ops' has no member named 'g_mbus_config'
898 | .g_mbus_config = veyecam2m_g_mbus_config,
| ^~~~~~~~~~~~~
drivers/media/i2c/veyecam2m.c:898:19: error: initialization of 'int (*)(struct v4l2_subdev *, struct v4l2_subdev_frame_interval )' from incompatible pointer type 'int ()(struct v4l2_subdev *, struct v4l2_mbus_config *)' [-Werror=incompatible-pointer-types]
898 | .g_mbus_config = veyecam2m_g_mbus_config,
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/veyecam2m.c:898:19: note: (near initialization for 'veyecam2m_video_ops.s_frame_interval')
cc1: all warnings being treated as errors
make[4]: *** [scripts/Makefile.build:273：drivers/media/i2c/veyecam2m.o] 错误 1一下是内核配置
============Start building kernel============
TARGET_ARCH =arm64
TARGET_KERNEL_CONFIG =rockchip_linux_defconfig
TARGET_KERNEL_DTS =roc-rk3588s-pc-mipi101-BSD1218-A101KL68
TARGET_KERNEL_CONFIG_FRAGMENT =rk3588_linux.config firefly-linux.config -
[0_1756784079945_log.zip](正在上传 100%) 这个是完整的编译log，您看一下，我使用firefly最新的SDK 进行的编译，采用5.10的内核
-
@flaty
参见代码的注释，你的内核缺少这个接口，需要注掉这个函数。
-
@veye_xumm 您这边 适配过 SDK1.4.0G 这个版本吗 firefly
-
@flaty 可以的。
-
@veye_xumm dts 参考这个 可以吗？https://github.com/veyeimaging/rk35xx_firefly/tree/main/linux/drivers/rk358x
-
@flaty 就是这个。
-
@veye_xumm zhge dsi的头您看 有问题吗 检测不到相机，
#include "roc-rk3588s-pc.dtsi"//#include "rk3588-roc-pc-cam-8ms1m.dtsi"
//open this line to enable fpdlink-III link
//#include "rk3588-roc-pc-fpdlink-90ub954.dtsi"//open this line to enable v-by-one hs link
#include "rk3588-roc-pc-vbyone-overlay.dtsi"#include "rk3588-roc-pc-cam-veyecam2m.dtsi"
#include "rk3588-roc-pc-cam-veyemvcam.dtsi"#include "roc-rk3588s-pc-v10-diff.dtsi"
#define WHICHDSI 0 /* dsi0 = 0,dsi1 = 1*/ -
-
@veye_xumm 我再试一下吧，不知道咋回事，，，编译什么都没问题
-
@veye_xumm
[ 7.047946] veyecam2m 7-003b: veye camera driver version: 00.01.01
[ 7.047980] veyecam2m 7-003b: Failed to get power-gpios, maybe no use
[ 7.048101] veyecam2m 7-003b: supply avdd not found, using dummy regulator
[ 7.048213] veyecam2m 7-003b: supply dovdd not found, using dummy regulator
[ 7.048278] veyecam2m 7-003b: supply dvdd not found, using dummy regulator
[ 7.048303] veyecam2m 7-003b: could not get default pinstate
[ 7.048309] veyecam2m 7-003b: could not get sleep pinstate
[ 7.048320] veyecam2m 7-003b: Success to get veyecam2m endpoint data lanes, dts uses 2 lanes
[ 7.170539] veyecam2m 7-003b: camera id is veyecam2m
[ 7.173503] veyecam2m 7-003b: sensor is IMX385
[ 7.173564] veyecam2m 7-003b: board type is ONE board
[ 7.219705] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_veyecam2m 7-003b:bus type 5
以上电源的错误，但是ls /dev/video0 可以看到设备了
