MV-MIPI-SC130M autoexposure problem
-
Hi,
I am using MV-MIPI-SC130M camera with RK3588S basic image from VEYE.
Camera is configured used to hardware trigger mode on rising edge, aemaxexposure time is 5000 mks.
Sometimes after restarts autoexposure mode does not work, current exposure time is near 4600 - 4800 ms and does not changes, even if I change aemaxexposure value.
After restart autoexposure works normally. -
@dan
Generally, in external trigger mode, manual exposure is recommended.
This is because the algorithm of the automatic exposure mode relies on regular image input, whereas the trigger intervals in external trigger mode may be random or even very long.
If the ambient lighting in your application scenario is stable, it is still advisable to use manual exposure mode. -
@veye_xumm
We use regular external trigger, target framerate is 20 fps. Ambient lighting not stable, so we have to use autoexposure mode. -
@dan Please read the version number of the camera you are using and send it to me.
-
@veye_xumm
version is C 01.35 and L 02.01 -
@dan
Please refer to the two links below to upgrade the firmware of your camera. Then test it again.
https://wiki.veye.cc/index.php/Mvcam_firmware_update_manual
https://wiki.veye.cc/index.php/MV-MIPI-SC130M_Version_Log -
@veye_xumm
Thank you, I take a some time for tests -
@veye_xumm Hi,
Firmware update does not solve the problem, after software reset auto exposure mode works normal
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login