VEYE IMAGING Forum
    • Categories
    • Tags
    • Recent
    • Popular
    • Users
    • WIKI
    • veye.cc
    • Register
    • Login

    MV-MIPI-IMX265M调焦问题

    Scheduled Pinned Locked Moved General Discussion
    19 Posts 2 Posters 4.7k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • veye_xummV Offline
      veye_xumm @simonpi
      last edited by

      @simonpi 对了，忘了跟您说了。 64位系统的话，legacy模式不行。 详情可以参考这个：
      https://forums.raspberrypi.com/viewtopic.php?t=328973

      Questions will be answered as soon as possible, please be patient.
      如果你使用中文，请直接用中文提问。
      May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

      S 1 Reply Last reply Reply Quote 0
      • S Offline
        simonpi @veye_xumm
        last edited by

        @veye_xumm 改32位系统可以使用legacy,但我按操作来也不显示相机预览，也没遗漏什么步骤啊
        d2fad17c-cb0a-442a-9996-e3f941eb4da1-image.png 23d7f365-caa9-4829-8dda-4b807c7c94dd-image.png

        veye_xummV 1 Reply Last reply Reply Quote 0
        • veye_xummV Offline
          veye_xumm @simonpi
          last edited by

          @simonpi
          到mv_tools_rpi目录下面，执行以下这个，把i2c-10先搞出来。

          ./enable_i2c_vc.sh

          Questions will be answered as soon as possible, please be patient.
          如果你使用中文，请直接用中文提问。
          May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

          S 1 Reply Last reply Reply Quote 0
          • S Offline
            simonpi @veye_xumm
            last edited by

            @veye_xumm依旧又报错，也没显示预览画面。。。 829fff1b-4f22-4a4c-8eb3-fae5ee4198ac-image.png

            veye_xummV 2 Replies Last reply Reply Quote 0
            • veye_xummV Offline
              veye_xumm @simonpi
              last edited by

              @simonpi 这两个寄存器没关系的，正常来说应该在hdmi口能看到视频了。你试试
              ./mv_raspicam -t -1

              Questions will be answered as soon as possible, please be patient.
              如果你使用中文，请直接用中文提问。
              May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

              S 2 Replies Last reply Reply Quote 0
              • veye_xummV Offline
                veye_xumm @simonpi
                last edited by

                @simonpi 另外读一下版本号发出来我看看

                Questions will be answered as soon as possible, please be patient.
                如果你使用中文，请直接用中文提问。
                May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                S 1 Reply Last reply Reply Quote 0
                • S Offline
                  simonpi @veye_xumm
                  last edited by

                  This post is deleted!
                  1 Reply Last reply Reply Quote 0
                  • S Offline
                    simonpi @veye_xumm
                    last edited by

                    @veye_xumm 180425dd-058e-49d2-8935-11de2fd34978-image.png

                    1 Reply Last reply Reply Quote 0
                    • S Offline
                      simonpi @veye_xumm
                      last edited by

                      @veye_xumm 谢谢，解决了，但是如果我调好焦距后改用v4l2的话，需要固定相机，每次挪动一点就得又切回legacy调嘛

                      veye_xummV 1 Reply Last reply Reply Quote 0
                      • veye_xummV Offline
                        veye_xumm @simonpi
                        last edited by

                        @simonpi 现在这地方的确是有点麻烦。现在我们也在进一步研究怎样把raw数据直接导入到opencv预览出来。
                        MV系列其实支持一种纯粹作为调试用的UYVY模式，在v4l2模式下应该可以使用gstreamer预览。
                        这个在jetson平台上是成功的。
                        http://wiki.veye.cc/index.php/Mv_series_camera_appnotes_4_jetson/zh#.E5.AE.9E.E6.97.B6.E9.A2.84.E8.A7.88
                        当然了，上面这个命令使用了jetson平台专用的gstreamer plugin。
                        可以参考下面这个命令改改。
                        http://wiki.veye.cc/index.php/V4L2_mode_for_Raspberry_Pi/zh#.E8.A7.86.E9.A2.91.E9.A2.84.E8.A7.88.28VEYE-MIPI-327.2CCS-MIPI-IMX307_.401080p_mode.29
                        两者结合相信能做个预览的pipeline出来。不过纯软件模式帧率肯定不够高。

                        Questions will be answered as soon as possible, please be patient.
                        如果你使用中文，请直接用中文提问。
                        May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                        S 2 Replies Last reply Reply Quote 0
                        • S Offline
                          simonpi @veye_xumm
                          last edited by

                          This post is deleted!
                          1 Reply Last reply Reply Quote 0
                          • S Offline
                            simonpi @veye_xumm
                            last edited by

                            @veye_xumm 遇到几个小问题，都直接截图一次性列举吧，麻烦解答一下。
                            1.明明是存五张图，结果在文件夹得到的是六张图片
                            2ea39719-5644-47fe-9245-dbbc67a5c012-image.png
                            e512a6e5-fa42-44c7-b01e-b2889f9aa197-image.png

                            2.在完成相机上电，视频预览，以及保存图片后，设置软触发模式，在取图环节未出现预览图。
                            输入触发指令后，有图片显示，但不知如何存储，尝试使用保存图像命令，但存储的图片为0字节

                            4c1d52a8-fd53-4b19-8cdc-b8e421cd729c-image.png
                            1b8d06c9-538a-4fae-9800-34655960f7d4-image.png
                            0fcd9475-9c81-472c-aec6-514bb3a1ce80-image.png
                            e735f400-56ce-47f5-aa75-365b6d466a27-image.png

                            veye_xummV 2 Replies Last reply Reply Quote 0
                            • veye_xummV Offline
                              veye_xumm @simonpi
                              last edited by

                              @simonpi

                              @simonpi said in MV-MIPI-IMX265M调焦问题:

                              明明是存五张图，结果在文件夹得到的是六张图片

                              这个程序是开源的，目的仅作为客户上手调试的demo，并不是作为生成程序，所以这类逻辑细节并未关注。

                              @simonpi said in MV-MIPI-IMX265M调焦问题:

                              2.在完成相机上电，视频预览，以及保存图片后，设置软触发模式，在取图环节未出现预览图。
                              输入触发指令后，有图片显示，但不知如何存储，尝试使用保存图像命令，但存储的图片为0字节

                              fccdb2f9-1dcf-4185-9e58-343e06a51033-image.png
                              去掉-sr参数再试一下。

                              Questions will be answered as soon as possible, please be patient.
                              如果你使用中文，请直接用中文提问。
                              May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                              1 Reply Last reply Reply Quote 0
                              • veye_xummV Offline
                                veye_xumm @simonpi
                                last edited by

                                @simonpi
                                V4L2模式已经增加通过gstreamer命令进行预览的相关说明。
                                请参考：
                                http://wiki.veye.cc/index.php/Mv_series_camera_appnotes_4_rpi/zh#.E5.AE.9E.E6.97.B6.E9.A2.84.E8.A7.88
                                part6.6.5

                                Questions will be answered as soon as possible, please be patient.
                                如果你使用中文，请直接用中文提问。
                                May the force be with YOU. (This is the translation of the mysterious Chinese symbol above.)

                                1 Reply Last reply Reply Quote 0

                                Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                With your input, this post could be even better 💗

                                Register Login
                                • First post
                                  Last post