UNSOLVED software trigger for MV-MIPI-SC130M

dm

Hi,
How to make a long exposure on the MV-MIPI-SC130M camera? Is it possible to change the program code?
Requires a software trigger to control exposure time up to 1 minute.
Can any body help me?

veye_xumm

@dm
With today's camera firmware, the exposure time is limited by the minimum frame rate. To achieve long exposures, you first have to configure a very small frame rate, here are our measurements.

dm

@veye_xumm
Thank you.
Are the trigger pins of the sensor not connected to the device controller?

veye_xumm

@dm

@dm said in software trigger for MV-MIPI-SC130M:

Are the trigger pins of the sensor not connected to the device controller?

The trigger pins of the sensor are connected to the device controller