Can't get v4l2 to work, rasbperry pi 4b, rpi os x64, 6.12.57-v8+

[veye_xumm]

@jambojettt said in Can't get v4l2 to work, rasbperry pi 4b, rpi os x64, 6.12.57-v8+:

@veye_xumm yes, it updated to 6.12.57, but this problem also was in 6.12.47 that it was updated from.
How do I get the headers?

My Raspberry Pi comes with headers by default. You might want to reinstall piOS? We've already released the 6.12.47 ko file on GitHub.

[jambojettt]

@veye_xumm I tried it before. Right now reinstalled Pi OS from Pi Imager, no kernel headers, so problem not resolved.

[jambojettt]

@jambojettt Just checked, I have a 64 bit version, just to be sure.
Kernel headers are installed.

[jambojettt]

@jambojettt
Did everything step by step on the github page. The kernel thing didn't work. Don't know what to do next. dmesg didn't work

[veye_xumm]

@jambojettt
Normally, the PiOS you installed comes with kernel-headers. Could you tell me which image link you used?
Can you help run this script and send me the results?

uname -a
ls /usr/lib/modules/
ls /usr/lib/modules/$(uname -r)

[jambojettt]

@veye_xumm
Wrote them, sending the results.

[veye_xumm]

@jambojettt
Sorry for reply late.
I see that your raspberrypi-kernel-headers are installed. You should be able to directly run make in the driver source code directory.

[jambojettt]

@veye_xumm can you specify what I need to do?

@veye_xumm said in Can't get v4l2 to work, rasbperry pi 4b, rpi os x64, 6.12.57-v8+:

make

deleted the folder raspberrypi_v4l2
reinstalled by github

I have no idea why it doesn't work.

Which one do I use?

[veye_xumm]

@jambojettt

Please try this released version again. This time it will work.

https://github.com/veyeimaging/raspberrypi_v4l2/releases/tag/v1.27

[jambojettt]

@veye_xumm did delete a folder raspberrypi_v4l2, reinstalled. Checked the connections, everything was in order. Pins on the ribbon cable to the top on the module and to the front on the pi. Checked the power pins. Everything was okay. I don't have samba in raspi-config, but I enabled ssh. Also don't have Camera interface in options.
The dev/video0/ is still unfound.

[veye_xumm]

@jambojettt
show me the result of this cmd:

dmesg | grep veye

[jambojettt]

@veye_xumm nothing showed

[jambojettt]

@veye_xumm is there any point in a fresh pi os install?
I accidentally swapped the pins after I checked everything, and it shorted, hope it works.
I just need it to work, so I can do my thesis on argicultural application of machine learning.

[jambojettt]

@veye_xumm
Everything is the same

[jambojettt]

@veye_xumm ! [0_1764333202538_7825037f-a24a-4cbf-b16b-42693c1e5a87-изображение.png](Uploading 100%)
I'm out of possible problems, maybe i got the pins wrong.

[jambojettt]

@veye_xumm

[veye_xumm]

@jambojettt
I suspect you haven't seen the most important document, which is the link below. Generally, you don't need to compile the driver yourself. Instead, you can simply install the driver by following part4 in the link below. Specifically, the command you need to execute is: sudo ./install_driver.sh veyecam2m

https://wiki.veye.cc/index.php/V4L2_mode_for_Raspberry_Pi#Driver_Installation

[jambojettt]

@veye_xumm
Before I followed the wiki, then I followed github. Which one is the correct one?

[veye_xumm]

@jambojettt
Sorry for missing veyecam2m.dtbo, please try this new release package.

https://github.com/veyeimaging/raspberrypi_v4l2/releases/tag/v1.27

[jambojettt]

@veye_xumm it is resolved now, the image is shown. Before with the steps on the forum the .dtbo file was also missing, I copied it from another folder and it didn't work. The right and supported way of installing drivers is very confusing, I tried installing by wiki guide and then compiling locally (github), since it didn't work. Thank you for your patience.